PDA

View Full Version : Help needed to repair a Richard allen CB8 Driver



dantheman91
05-07-2012, 09:48
Hi

is there anyone in bournemouth thats good at repairing base drivers? help would be appreciated.

The driver is a

Richard allen CB8 "8 ohm"


or if any one is selling the same driver let me know


Thanks Guys
dan

Techno Commander
05-07-2012, 16:20
Wembley Loudspeakers are probably your best bet for unusual recones.
They are very good at it.:)

dantheman91
05-07-2012, 16:32
Cheers mate

:cool:

dantheman91
26-09-2012, 15:35
Update of the split from the back. Any thoughts on a good way to repair it or just leave it. :scratch:

snuffbox
26-09-2012, 21:25
Superglue,spread a thin film over the affected area.
Just a thought.

SPS
26-09-2012, 21:40
I'd second that, a little glue would is likely to retain the sound of the original cones, where a recone is like starting with a new driver. I have a pair of the 10's they are nice drivers.

dantheman91
26-09-2012, 22:13
thanks chaps. will any uper glue do? what will i need to spread it thinly etc how long will it take to set etc.

dowser
27-09-2012, 06:24
For a split plastic coned speaker I used the iron on fabric tape to the back of the cone. I stuck it on with a copydex type (non aggressive - kids craft glue type of thing). The split was much worse than this one, and still fine a couple of years later. I did a thread over on PFM in the DIY section if you want photos.

Best to fix it IMO, mine was so bad the cone distorted, if you don't strengthen it now it will get worse.

Good luck, Richard

dantheman91
11-10-2012, 13:25
Will ordinary superglue do. got to get round and get this done but not sure i have the skills to. what tape could i use etc just a thought

dowser
11-10-2012, 18:10
I wouldn't use superglue - kids craft glue is best. Tape is the stuff used to hold up DIY shortened trousers and the like - available wherever wives but this sort of stuff (sorry!).

Richard

dantheman91
12-10-2012, 07:01
http://www.ebay.co.uk/itm/5-Kids-Craft-Glue-Adhesive-Paste-PVA-Spreader-Spatula-/170502092192?pt=UK_Crafts_Children_s_Crafts_EH&hash=item27b2b775a0

and

http://www.ebay.co.uk/itm/60ml-PVA-GLUE-FOR-KIDS-CRAFT-DOUBLE-ENDED-GLUE-PEN-/250770492899?pt=UK_Crafts_Children_s_Crafts_EH&hash=item3a63160de3

or.....???

dowser
12-10-2012, 08:15
Yep - I used that glue with this sort of tape to repair a plastic cone;

http://item.mobileweb.ebay.de/viewitem?itemId=290723359392

Richard

dantheman91
12-10-2012, 08:30
Is it cool to use a Spatula to spread it on. How much do i need etc.

sq225917
12-10-2012, 11:02
Bockingford watercolour paper and PVA.

http://www.greatart.co.uk/BOCKINGFORDWATERCOLOURPAPER-water-colour-sheets-rolls.htm

Volante
18-10-2012, 08:09
..alternatively look out for a pair of Richard Allan Chaconne speakers which i believe use the CB8 8" bass unit and the 460T 4" tweeter.

They come up on fleabay now and again and are not expensive.

last pair went on fleabay for £1.70 on 23 June 2011

Item number:261044909585

Good luck

dantheman91
19-10-2012, 12:42
..alternatively look out for a pair of Richard Allan Chaconne speakers which i believe use the CB8 8" bass unit and the 460T 4" tweeter.

They come up on fleabay now and again and are not expensive.

last pair went on fleabay for £1.70 on 23 June 2011

Item number:261044909585

Good luck


Thanks. :eyebrows:

DSJR
19-10-2012, 19:47
Don't Richard Allan still exist in one form or another?