Reffc
29-06-2012, 21:43
Now taking orders for Turntable plinths for your Garrard 301/401 Turntables. Fully isolated chassis design (no more motor noise coming through to your tonearm!).
Example in solid oak blockboard shown below:
http://i1140.photobucket.com/albums/n577/24pacman/Hifi/_MG_5388.jpg
http://i1140.photobucket.com/albums/n577/24pacman/_MG_5365.jpg
http://i1140.photobucket.com/albums/n577/24pacman/_MG_5348.jpg
Features:
Sorbothane chassis supension...isolation of all motor and idler noise;
Two tier plinth with adjustability for levelling platter via turned Brass cones (see picture above);
Plinths are inset so that they are almost flush with the timber surface for a smart, neat and contemporary finish;
Choice of solid timber, solid block timber or veneered Birch ply;
Veneers supplied include Zebrano, Oak, Burr (birdseye) Maple, Burr Walnut, Rosewood or Red Cherry (all high gloss thick sawn cut topgrade veneers). All veneered plinths constructed from two 36 or 48mm Birch ply;
Expert cabinet maker employed to ensure top furniture grade quality.
These are not the usual cheap low mass skeletal plinths made from low quality timbers onto which your decks are bolted, transmitting motor chassis noise to your tonearm and crudely cut and finished. These are expertly made to the highest standards from top quality timber and perform every bit as well as they look!
Prices:
Oak Block (pictured): £550
Veneered ply: Prices from £600...please PM me for a quote,; prices dependant upon veneer chosen.
All plinths are hand finished by a craftsman who specialises in high quality bespoke furniture. After sanding, 6 coats of Shellac based lacquer are applied, with each coat lightly sanded followed by several coats of beeswax to bring the final piece to a luxurious high quality finish.
Turnaround: From 10 to 15 days of placement of order
Beautiful plinths which will last a lifetime. Please PM me for further details or to place an order.
Other makes of turntable catered for (similar prices).
Example in solid oak blockboard shown below:
http://i1140.photobucket.com/albums/n577/24pacman/Hifi/_MG_5388.jpg
http://i1140.photobucket.com/albums/n577/24pacman/_MG_5365.jpg
http://i1140.photobucket.com/albums/n577/24pacman/_MG_5348.jpg
Features:
Sorbothane chassis supension...isolation of all motor and idler noise;
Two tier plinth with adjustability for levelling platter via turned Brass cones (see picture above);
Plinths are inset so that they are almost flush with the timber surface for a smart, neat and contemporary finish;
Choice of solid timber, solid block timber or veneered Birch ply;
Veneers supplied include Zebrano, Oak, Burr (birdseye) Maple, Burr Walnut, Rosewood or Red Cherry (all high gloss thick sawn cut topgrade veneers). All veneered plinths constructed from two 36 or 48mm Birch ply;
Expert cabinet maker employed to ensure top furniture grade quality.
These are not the usual cheap low mass skeletal plinths made from low quality timbers onto which your decks are bolted, transmitting motor chassis noise to your tonearm and crudely cut and finished. These are expertly made to the highest standards from top quality timber and perform every bit as well as they look!
Prices:
Oak Block (pictured): £550
Veneered ply: Prices from £600...please PM me for a quote,; prices dependant upon veneer chosen.
All plinths are hand finished by a craftsman who specialises in high quality bespoke furniture. After sanding, 6 coats of Shellac based lacquer are applied, with each coat lightly sanded followed by several coats of beeswax to bring the final piece to a luxurious high quality finish.
Turnaround: From 10 to 15 days of placement of order
Beautiful plinths which will last a lifetime. Please PM me for further details or to place an order.
Other makes of turntable catered for (similar prices).