Si74
13-04-2012, 14:03
Harmonic Tech Cyber Wave I/Cs 1.5 mtr pair.
locking bananas both ends.
Plenty of differing views on the web but still the
best I/C s I’ve used. These are the standard 2.5v for use between cd & pre.
Have a brand new wallwart and a Mk 11 battery supply.
The battery supply is extremely heavy and will bump the postage
up considerably plus it’s not been used for a while so basically
thrown in if you want to pay the postage.
These were $1,500 + $400 for the psu.
Still use these between pre & power but hardly use cd so overkill.
£400 posted for the cables/wallwart,
Cables + battery supply £400 + cost of courier – psu weighs 4.1Kg
Aural Thrills active sheilded speakers cables
Can be powered by 9 volt battery or adjustable wall warts (3-15V),
Found 9V the best setting so ran from batteries, no wallwarts but
these are readily available from ebay if you want to experiment.
Locking bananas amp end , spades at the speaker end.
Last pair I noticed for sale were ex dem from Angelsound
at £135 so £85 including domestic postage.
These replaced seriously expensive cables which, while suited
to my Passlabs, didn’t suit my Audiopax.
Kimber 4TC - blue & black, 6ft pair. Was a single cable
cut in half so kimber bananas one end and screw on bananas
at the other end. Marked for direction £60 posted.
Zion speaker cables 6 ft pair – again from a single cable but
professionally re-terminated into a pair. They are nice sounding cables
but overkill for my valve amps. Bananas both ends.
£75 posted (these are heavy cables)
Zion I/Cs 1 mtr pair with Audio note phonos. One cable is an inch
longer than the other? But they have the factory terminations so
never noticed this till now.
£60 posted.
WBT -0680 sandwich spades 8mm fork – as new in box
with tool £30 posted
locking bananas both ends.
Plenty of differing views on the web but still the
best I/C s I’ve used. These are the standard 2.5v for use between cd & pre.
Have a brand new wallwart and a Mk 11 battery supply.
The battery supply is extremely heavy and will bump the postage
up considerably plus it’s not been used for a while so basically
thrown in if you want to pay the postage.
These were $1,500 + $400 for the psu.
Still use these between pre & power but hardly use cd so overkill.
£400 posted for the cables/wallwart,
Cables + battery supply £400 + cost of courier – psu weighs 4.1Kg
Aural Thrills active sheilded speakers cables
Can be powered by 9 volt battery or adjustable wall warts (3-15V),
Found 9V the best setting so ran from batteries, no wallwarts but
these are readily available from ebay if you want to experiment.
Locking bananas amp end , spades at the speaker end.
Last pair I noticed for sale were ex dem from Angelsound
at £135 so £85 including domestic postage.
These replaced seriously expensive cables which, while suited
to my Passlabs, didn’t suit my Audiopax.
Kimber 4TC - blue & black, 6ft pair. Was a single cable
cut in half so kimber bananas one end and screw on bananas
at the other end. Marked for direction £60 posted.
Zion speaker cables 6 ft pair – again from a single cable but
professionally re-terminated into a pair. They are nice sounding cables
but overkill for my valve amps. Bananas both ends.
£75 posted (these are heavy cables)
Zion I/Cs 1 mtr pair with Audio note phonos. One cable is an inch
longer than the other? But they have the factory terminations so
never noticed this till now.
£60 posted.
WBT -0680 sandwich spades 8mm fork – as new in box
with tool £30 posted