Gromit
25-01-2012, 19:15
I've gone back to using the OEM headshell on my 1210 because for the Jico Shure it sounds better than with it in the Sumiko, and I can achieve level vta - the Sumiko holds the cartridge higher (relative to the armtube) and the Achromat's thinner than the Tecchy mat. Result - unless a spacer's used between cart'n'shell the thing will always run slightly tail-up.
Anyway, slight problem in that the azimuth with the std shell is very slightly askew - it's down on the spindle side, not by a lot, but enough to bug me a bit. Now, before I start undoing the arm screws and wrecking the tonearm's earthing arrangement, does anyone know if the arm can be moved slightly to re-adjust azimuth?
May even be a question for J7. :)
Ta. :)
Anyway, slight problem in that the azimuth with the std shell is very slightly askew - it's down on the spindle side, not by a lot, but enough to bug me a bit. Now, before I start undoing the arm screws and wrecking the tonearm's earthing arrangement, does anyone know if the arm can be moved slightly to re-adjust azimuth?
May even be a question for J7. :)
Ta. :)