PDA

View Full Version : ProAc Minitower



diceman
01-04-2011, 10:21
ProAc minitower in black ash with the optional metal footplates (from ProAc).
Uses Scanspeak tweeter and a pair of Seas 11f-GX 4.5" mid/bass. Basically the same as a ProAc tablette but with an extra bass driver and no need for additional expensive stands. The base of the speaker is fillable with sand or suchlike. Really nice mid-range on these and tight bass. The grilles have strange marks on them like they are starting to lose colour in areas. Cabinets are pretty good condition.

Looking for £250 collected from Farnborough Hampshire or will consider swaps (if you have what I am looking for!)

Dimensions :- 960mm H (including spokes & stand plate) 150mm W x 220mm D

Pictures:-
http://i160.photobucket.com/albums/t187/diceman200/hifi/P3270002-1.jpg



picture of marking on grille (you could probably disguise this very easily or just replace the fabric:-
http://i160.photobucket.com/albums/t187/diceman200/hifi/P3270005.jpg
http://i160.photobucket.com/albums/t187/diceman200/hifi/Picture012small.jpg

Tablettes go for more and you have to buy stands. IMHO these are a bit better than the same era tablettes and have extra headroom due to the extra bass driver. Bass drivers are 16ohm variants wired in parallel to provide an 8ohm combined load.

Darren Cotter
15-04-2011, 19:29
Hi,

Would you consider delivery to Jersey, if so, how much?

Regards,

Darren

diceman
16-04-2011, 09:46
I will have a look in to it. I don't have boxes so TBH I would have to make some. They are heavy little buggers.

Do you have a courier you would like to use?

I could start and have a look at the possibility.

diceman
02-05-2011, 10:32
sold