- Celestion Ditton 15 XR - speaker refurbishment
- help needed with valve amp issue
- Replacing Speaker Grille Cloth
- Bigish caps at reasonable cost?
- Caps Wanted
- Help! I cant solder anymore.
- Heybrook Heylo crossover re-build (or not?)
- Switching a relay?
- Links for speaker building projects and info...
- Ever crimped RCAs ?
- Buffalo Dac
- 6502 Processor as a DAC?
- Vintage style Ground Posts Wtd
- Q about 7510 mod 21
- speaker terminal adaptor
- Soldering iron recommendations
- Sansui wiring
- Phone amp rolling
- Help- psu needs new caps
- Sony DASR1 DAC Diy help please !
- Murata regs + Caiman = Problem??
- Circuit for a 50Hz Red LED Strobe
- CD960 CD94 TDA151A obsessive meddling
- HPA power amp capacitors?
- Oops! Need some advice on fuses for JR149 speakers
- DIY DC blocker?
- Balanced mains transformers, surge protections?
- Dust - Best way to clean internally
- Are all RCD's created equal?
- Decent mains cable for DIY?
- I've gone over to the dark side :lol:
- Battery power supplies - lead acid cells
- Technical question - CD transports
- Hi There...My homebuild stuff
- Balanced Power Supply problems - any ideas?
- Balanced Mains - first impressions very favourable
- Oh Dear...Replacement needed for Caiman big smoothing cap?
- CAT 7 sheilded interconnects
- Speaker Posts
- High-quality capacitors needed for valve amp PSU
- Birch Play off cuts
- DIY HiFI Supply amplifiers
- Sd acoustics bass driver re-foam...?
- USB Oscilloscope
- Paint finish for speaker cabinets
- Electrical enclosure/box wanted.
- 'Breathing' hissing noise through one channel
- IPL speaker kits
- DCB1 (Modified Pass B1 Buffer)
- Transformer temperature
- A simple phono stage
- Westminsters et al
- The Phono Stage Is A Critical Part?
- stupid question as im no nothing about electronics
- Amp Kits. (Tube or Solid State)
- Some valve pron
- Diy Turntable almost finished
- DIY Parts Suppliers, faceplates, etc
- Nobel 50k potentiometers
- PCB Boards.
- Spare screws to fit 7520/Caiman dac case?
- Westminsters
- Outboard Loudspeaker Crossovers position
- Something cheap to tinker with?
- Silver Pen - Draw your circuits...
- Open Baffle speaker
- Dexa regs 20% off
- Speaker seal
- Motor for Systermdek TT?
- 12 volt trigger switches
- Advice needed for a DIY class A (solid state) headphone amp
- Quality Crimper
- DIY cables - CAT5
- Custom Heatsinks
- Quick check RE: Murata regulator replacement for Caiman?
- New 10k Stereo log pot for Musical Fidelity A100 - sources?
- Replace caps in active monitor
- Small run/one off circuit boards.
- Fostex 103e
- DIY mains cables
- Linn K20 speaker cable.
- Dali Ikon ribbon tweeters from eBay
- Thorens TD150 refurb
- Speaker project.
- fs: potted/shielded power transformer
- (7520) ml 05/08
- Exponential Curved Backloaded Horn Speakers from Japan
- Numptie electrical mains wiring advice please.
- can a 250K vol.pot be used in place of a 470K one?
- Supra LoRad 2.5 mains Cable
- Power supply for my Thorens
- Objective2 Headphone Amplifier
- kwb Line Master
- Linear regulated DC supply transformer current rating?
- Mains plug to accept 16mm diameter cable
- Gemini PA-7000 op amp change
- A vacuum tube hi fi primer
- DIY Moving Coil Phono Stage
- Midrange
- Copland CSA 14, rework and upgrade.
- Circular blue Led switch for phono frontal
- Deadening Material
- Caiman and TC-7520 case project
- Sansui AU 9500
- full range idea
- Linestage kit
- Maplin Oscilloscope Offer
- Building open baffles
- Diy record cleaning machine used with vac
- Power lead termination.
- problem with one Philips ad 12202/M8
- Rega r200 anti skate belt
- Technics SL-10 rework
- The Edingdale Loudspeaker
- Link for valve amp power supply constructors?
- Putting Linn springs on my Thorens
- Westminster Tannoys
- New speaker project
- Technics SL-1500MK2 Replinth Project
- Valve hifi 12W power amp needs a Doctor, anyone ?
- New Speaker build
- The Metronome Loudspeaker
- Over Exposed Exposure.
- Regulator for Squeezebox Touch PSU
- Restoring an old Crown IC-150 preamp - caps and IC's
- Goodmans Magnum K2 project
- Goodmans Magnum K2 project
- A different dimension rect. Tannoy GRF for Reds
- Jabo horns?
- Ants Beresford TC-7520 mods & guide
- where to buy a shield/cover for hifi interconnect ?
- Clock upgrades for VRDS 7
- Pimpin a Pretek
- Electrical Safety Advice
- Caiman DAC Chip Decoupling Caps
- Is Switch cleaner ok
- small phono plugs reccomendations
- Focal-JMLab Chorus 706S project
- Imperial Sizes C/Sunk Allen Bolt availability
- PIONEER PD-91 CD Player (1987/1990), how to dial in for optimal CD-R playback
- Paul Hynes PSU for Caiman DAC
- Behringer A500 - Any Thoughts?
- Getting into DIY
- Cheap Phono Interconnects
- Tannoy Monitor Gold Crossovers
- DIY Pre-amp with MP3 Player (and FM Tuner)
- Denon Body Mod
- Another case of upgradeitis or should I recap my 1210 PCB
- Crap!! Caiman Toslink socket broken...
- extension leads
- New speaker stand idea?
- Capacitor value substitution
- Capacitor bulging and 30% drop in value.
- Valve Headphone Schematic wanted
- Garrard 301 Plinth
- my new rack
- My Beresford TC-7520 project...
- Pass Pearls?
- P.S.E Hardwood supply
- Found the elusive devils (Ditton 66)
- UUUMMM New Caps
- Fuse bulbs for Marantz Receiver
- Caddock resistors: What do the numbers signify?
- Altec Lansing Rebuild
- Zu Druid Clone
- Copper time again
- My(fastfred) H.H. Scott 299B project (re....photo bucket exp...)
- Anybody built their own turntable?
- External Crossover cable
- Thorens speed control
- Tripath TA2022 Amp project
- The sound difference between Elna Silmic 1/2 versus Elna Cerafine
- Good Will To All Audiophiles
- Capacitor advice (Elko Vishay Roe or Elna for Audio)
- Shunting capacitor?
- Wharfedale Diamond II crossover...hmmm
- film capacitor help please.
- 2/3/4/5 way horn build
- PL-71 capacitor replacement
- Cleaning chrome
- Resistor types?
- right thread? ...hope so
- What does an inductor do in a speaker crossover?
- Superclock in SL-1210
- Anyone here use Ansar SPA Capacitors?
- Technics SP-10
- Do crossover capacitors have a sound?
- THANK YOU!!!!!!!!!!!!
- Balls, Balls, Balls and further curses!
- Bipole speaker build
- Lumley ST70 Output impedance change
- DIY Tannoy Westminster Royal
- pensil speakers
- Audiolab 8000A recap and mod
- Croft Charisma Line Stage
- Internal speaker wire?
- Pls help: WM8716SEDS vs WM8716SEDS/V vs WM8716SEDS/RV
- LP12 Lid
- Slate Plinth
- Your thoughts: Speaker versus Room Size
- Adding a cathode current meter?
- Capacitors -Help Please
- DIY rack
- Caiman - Murata reg fitting plus fixing pop with passive mod
- Box section end caps
- Soldering guns and irons
- Fostex fullrange drivers...?
- series 21 av center question !
- single ended sweeptube amp?
- Experiences of homemade room treatments.
- SABA Greencones
- Frugal 3 build
- Malvai's Garrard 401 Re-Build WIP
- Linear 3 Amp PSU
- Equipment rack. What am I aiming for
- SB Touch PSU from low-noise regulator and a battery??
- What's the optimal voltage for a caiman ...
- Unusual one: Laser-diode Power Supply DIY build!
- Thinking of building some Pensils - good idea?
- Wiring a plug - Pic Heavy
- Speaker Cables - internal wiring
- Internal Tonearm rewire
- Help - I've got a gain problem.
- Stripping out a DAC and making it external
- Traveling with DIY Kit in USA-Airport Security Question
- A new TC7520 Passive/Gator Project
- Allison Bass driver repair
- Before and After - a Quad 303
- M2 Tech Hi Face
- 5V power supply project.
- friend needs help
- leak stereo 20 restoration
- More Adventures in Speaker Re-foaming
- Croft Micro/ Croft Super Micro (improve) help please
- Any kind person fit my psu?
- DIY Sub
- Replacing components on old circuit boards - tips
- esr
- ProAc Response 1S clone pics and mods
- Help me if you can
- PTFE Thrust Pad
- Cardas Internal Pick-Up Arm Wire
- Silver Solder
- Keith's FH3 Build - Slow Progress
- quad 405-2
- Gainclone builders
- thru hole
- Pioneer PL-71 over speed issue
- Motor Pulley
- Self adhesive Sound Deadening Sheet