Looking for 3x adapter to take a ecc83 fitting to a 6n2p fitting tube as a friend of mine has a load of 6n2p tube that I can try out .
Location: swansea
Posts: 483
I'm gerald.
Looking for 3x adapter to take a ecc83 fitting to a 6n2p fitting tube as a friend of mine has a load of 6n2p tube that I can try out .
Location: London
Posts: 685
I'm James.
The adapters are likely to cost more than the tubes. If the heater circuit is 6.3V its an easy soldering job to reconfigure the socket wiring (disconnect bridge from pin 4 to 5 (but leave the wire attached to whichever pin - 4 or 5 that it arrives at) , disconnect wire from pin 9 and reconnect it to 4 or 5 - whichever does not now have a wire attached.
You can install a simple switch to achieve this to allow fairly rapid swapping.
If the heater is 12.6V the Russian valves can't be used.
Sent from my GT-I9195 using Tapatalk
Analogue. Basis signature 2200,Basis Vector 4.Koetsu Red,Koetsu SUT,NVO SPA 11.
Digital. Denon 2900,Jolida FX 11
Amp. Pathos Logos,Minidsp dirac 22A.
Speakers. Amphion Xenon.
Airlink CBS 2000 bps
Location: Solihull
Posts: 716
I'm Martin.
Lumley Heliosphere Audiomods 5
Voyd Valdi AN Arm 1 V2 and Denon MC
Audiomeca Talisman Highly Modded
Audiomeca Kreatura &,SW1X DAC1
Hovland HP200 MC
Hovland Radia
Ming Da 805 monos
Magnum Dynalab Etude, RWA Cassabria + LCD 3
Wilson Benesch Actors
Cables by Cardas, Hovland G3 and Yter