+ Reply to Thread
Results 1 to 10 of 75

Thread: 6J1 Pre-amp modifications (hum removal)

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date: Oct 2012

    Location: The Black Country

    Posts: 6,089
    I'm Alan.

    Default

    Sounds a bit odd. You should have plus and minus about 30V from the voltage doublers if everything is working properly.

    Is it pretty close to 12V AC you are putting in? If it is 13V or more then the caps could be overrated.

  2. #2
    Join Date: May 2008

    Location: Surrey

    Posts: 7,109
    I'm Rob.

    Default

    Quote Originally Posted by Firebottle View Post
    Sounds a bit odd. You should have plus and minus about 30V from the voltage doublers if everything is working properly.

    Is it pretty close to 12V AC you are putting in? If it is 13V or more then the caps could be overrated.
    I measured the PS (a musical fidelity wall wart for an X-10D) and it was just over 13vac which I thought would be ok?

    Would it be worth changing the cap? It had been used before, but I am not aware that it was duff.
    Last edited by Puffin; 21-03-2017 at 08:12.
    Buy Bose...And get your parking validated!.

    https://youtu.be/ZCBe7-6rw4M

    No Highs...No Lows....It Must Be Bose!

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •