+ Reply to Thread
Page 1 of 5 123 ... LastLast
Results 1 to 10 of 48

Thread: Wanted new amp for my dali epicon 2's

  1. #1
    Join Date: Jan 2017

    Location: Edinburgh

    Posts: 105
    I'm Craig.

    Default Wanted new amp for my dali epicon 2's

    Possibly after a new amp for my dali epicon 2's and wonder what's available.

    Budget is around £700 thanks. : )

  2. #2
    Join Date: Sep 2009

    Location: west mids, UK

    Posts: 3,268
    I'm Phil.

    Default

    the leema pulse is a lovely organic sounding amp that is very enjoyable . one here from well known shop frank harvey in coventry

    https://www.ebay.co.uk/itm/Leema-Aco...gAAOSw3HJZiuW5
    ou might slip, you might slide, you might
    Stumble and fall by the road side
    But don't you ever let nobody drag your spirit down
    Remember you're walking up to heaven

    Don't let nobody turn you around
    … Walk with the rich, walk with the poor
    Learn from everyone, that's what life is for
    And don't you let nobody drag your spirit down

    Eric Bibb

  3. #3
    Join Date: Jan 2017

    Location: Edinburgh

    Posts: 105
    I'm Craig.

    Default

    Hi Phil yip I had seen that one but wasn't sure about the looks do you think the Dali's need power as I thought I might try a tube amp but not sure with the pairing?

  4. #4
    Join Date: Jan 2012

    Location: Glasgow, UK

    Posts: 2,076
    I'm Tony.

    Default

    I'm using a Pulse SRA-160USB to run a pair of Dynaudio Audience 72s that I've just bought and they sound amazing, the amp cost me £60 SH or about £110 new delivered.

    Alan Shaw, the Harbeth speaker designer, actually recommends this amp and similarly priced ones (Pioneer I think) for his speakers.

  5. #5
    Join Date: Jan 2017

    Location: Edinburgh

    Posts: 105
    I'm Craig.

    Default

    Thanks but I am really after something higher end to replace my arcam avr 600 as I am going back to two channel. I had a bladelius thor in the past and wish I had kept it if I am honest as it had loads of power on tap.

  6. #6
    Join Date: Jan 2012

    Location: Glasgow, UK

    Posts: 2,076
    I'm Tony.

    Default

    Quote Originally Posted by Halcs View Post
    Thanks but I am really after something higher end to replace my arcam avr 600 as I am going back to two channel. I had a bladelius thor in the past and wish I had kept it if I am honest as it had loads of power on tap.
    Fair enough, I've had some decent amps (stereo amps including a Sugden A21a and P21a and a Quad 34/306 combo) and the Pulse is up there with the best of them.

    BTW, the speakers are a 4ohm load and need decent power and according to a mate of mine the Pulse circuit was designed around a copy of Quad amps circuits.

  7. #7
    Join Date: Apr 2015

    Location: Central Virginia

    Posts: 1,736
    I'm Russell.

    Default

    Those Epicon 2’s are some very refined speakers, and not cheap! I suspect that they will be very revealing of what you drive them with. Choose wisely, and don’t skimp.

    If it were me? I’d get a 50 watt Krell! But that’s just me.


    Sent from my iPad using Tapatalk

  8. #8
    Join Date: Jul 2012

    Location: Wimborne

    Posts: 701
    I'm Alex.

    Default

    Quote Originally Posted by Halcs View Post
    Thanks but I am really after something higher end to replace my arcam avr 600 as I am going back to two channel. I had a bladelius thor in the past and wish I had kept it if I am honest as it had loads of power on tap.
    How much are you wanting for the AVR600?

  9. #9
    Join Date: Jan 2017

    Location: Edinburgh

    Posts: 105
    I'm Craig.

    Default

    Hi Alex I will send you a pm regarding the arcam.

    No one got a solid state amp they are looking to move on that will get the best from my Dali's thanks?

  10. #10
    Join Date: Apr 2013

    Location: Easington Lane

    Posts: 4,636
    I'm Vince.

    Default

    Hi, lve got a Musical Fidelity fitted with 4 AMR fuses and an after matket lead, lm wanting £800. Its in excellent condition

    Sent from my D6503 using Tapatalk

+ Reply to Thread
Page 1 of 5 123 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •