OK, and I believe the bearing sleeves can be easily replaced if necessary
OK, and I believe the bearing sleeves can be easily replaced if necessary
Tear down these walls; Cut the ties that held me
Crying out at the top of my voice; Tell me now if you can hear me
Location: Yorks
Posts: 16,643
I'm Nobody.
Someone on Lenco Heaven makes new bearing housings if you provide the original bearing shaft but i guess Thingy Dave already knows this..
Lovely room and system Dave and from your photo the rack and TT shelf look to be identical to mine. One teeny concern though, the wee guitar in the corner compliments the look of the room beautifully, but don't you find that it resonates at certain frequencies when you are listening to stuff?
In - Tweaked Lenco GL75, Linn Ittok, Ortofon Cadenza Black
Through - Croft Micro 25 RS LS, power R monoblocks, RIAA R. Ortofon ST-80 SE SUT.
Along - Tellurium Q Ultra Black cables
Out - Harbeth SHL5 Plus XD's
Street photography
Dave
There are a number of options for new bearings on LH, but most on there believe the standard bearing is well able to take the strain of 2 platters. I use an L75 platter as the 2nd platter on my GL59 (L70).
The spindle extensions aren't exactly cheap but it's a no brainer. Like I said before, you'll never go back - clarity of imaging and soundstage is just so much improved.
Paul.
In - Tweaked Lenco GL75, Linn Ittok, Ortofon Cadenza Black
Through - Croft Micro 25 RS LS, power R monoblocks, RIAA R. Ortofon ST-80 SE SUT.
Along - Tellurium Q Ultra Black cables
Out - Harbeth SHL5 Plus XD's
Street photography
Dave
Location: Devon
Posts: 1,903
I'm stu.
How much do the platters weigh?
Keith
Analogue: Lenco L75 with 'PTP5' top plate in heavy birch ply plinth/re-wired Rega RB300/SAE 1000e HOMC Cartridge/Trans-Fi Reso-Mat/Moth RCM
Files: Voyage MPD/Custom PC/Supra USB/Beresford ASYNCH-1/Beresford TOSlink cable
CDP: Inca Katana SE
DAC: Beresford Caiman MkII (LiPo Battery powered)
Pre-Amp: Croft Micro 25 Power-Amp: Croft Series 7
Speakers: DIY Frugel-Horn Mk3 ('FH3') + REL Strata subwoofer
Headphones: Beyer Dynamics DT990 Pro (250 ohm)/Schiit Asgard Headphone Amp
Cables - Interconnects: Mark Grant G1000HD Speaker Cables: Van Damme Blue
Mains: Belkin PF30/Mark Grant DSP2.5 & DSP1.0 Rack: Target
Office System: HP Win8 Laptop/JRiver/MF V-Link2/Beresford Bushmaster MkII/Topping TP20 Mk2/Mission 771e
Bedroom System: Raspberry Pi/Raspbrian + MPD/HiFiBerry DAC/Topping TP20 Mk2/Mission 760i or DIY Hybrid Valve-MOSFET Headphone amp + Sennheiser HD595
Gallery
I 'm pretty sure it's 4 kgs Keith.
In - Tweaked Lenco GL75, Linn Ittok, Ortofon Cadenza Black
Through - Croft Micro 25 RS LS, power R monoblocks, RIAA R. Ortofon ST-80 SE SUT.
Along - Tellurium Q Ultra Black cables
Out - Harbeth SHL5 Plus XD's
Street photography
Dave
Location: Lancaster(-ish), UK
Posts: 16,937
I'm ChrisB.
3.7kg