https://sites.google.com/site/comput...x-touch-tweaks
and the SB forums link for support etc
http://forums.slimdevices.com/showthread.php?t=89359
Try 'em,
works alsongside Soundchecks mods, just as effective.
![]()
https://sites.google.com/site/comput...x-touch-tweaks
and the SB forums link for support etc
http://forums.slimdevices.com/showthread.php?t=89359
Try 'em,
works alsongside Soundchecks mods, just as effective.
![]()
Letting go and relaxing
is the most ‘in control’ thing you can do.
Enjoy being You,
no-one else gets to be that lucky
Good spot - I'll give it a try.
Thanks,
Alex
Technics SL1210| Jelco SA-750| Benz Micro ACE SM MC| Squeezebox Touch/MCRU linear PSU | Cambridge Audio 851C | High Resolution Music Streamer II+ / Linestreamer+ | Raspberry Pi 2/IQ-Audio DAC+ / Max2Play | Conrad-Johnson ET3 Control Amplifier| Conrad-Johnson LP125sa KT120 Power Amplifier| Avalon NP Evo 2.0 Speakers| Cardas Audio Quadlink-5C Speaker Cables and Interconnects| Finite Elemente Pagode Signature E-14 equipment support
Looks interesting Gaz, a good improvement?
Hmm, interesting. Not just me that thinks threading priority and preventing system services from accessing CPU makes a difference then![]()
Single spur balanced Mains. Self built music server with 3 seperate linear PSU, Intel i5, 16 GB RAM no hard drive (various Linux OS). Benchmark Dac2 HGC, single ended XLR interconnects/Belkin cable. Exposure 21RC Pre, Super 18 Power (recap & modified). Modded World Audio HD83 HP amp. Hand built Monitors with external crossovers , Volt 250 bass & ABR, Scanspeak 13M8621 Mid & Scanspeak D2905/9300 Hi. HD595 & Beyer 880 (600 ohm) cans.
The whole problem with the world is that fools and fanatics are always so certain of themselves, and wiser people so full of doubts.
-Bertrand Russel
John.
I've had a go at this.
I've been listening to high res files (24 bit, 96 kHz) via wireless streaming. The Touch is connected to my Rega DAC via a Mark Grant G1000HD coaxial cable.
Very early impressions are that more information is audible in the 8-10kHz region with the S/PDIF value at 59, compared to the unmodified settings.
This effect reduced as I lowered the value towards 45.
What do these figures actually relate to? Are their minimum and maximum values?
Last edited by camtwister; 08-08-2011 at 19:37.
Johnny Dodgem.
Cartridges vintage MMs including Pickering xsv-4000/xsv-3000 : Stanton 881s/D81 : AT140LC/VMN40ML
Spinners hot rod 1210 (Jelco 750D, Origami, Ammonite, Longdog, Vantage, Achromats) : Pye G63 & Garrard AT6 : Two full custom Lencos : Kenwood KD-650D
Streaming Qobuz : BluOS & Node2 (Fidelity Audio modified) : RME ADI-2 DAC
Pre-amps Tron Seven (GT modified) : Conrad Johnson EV1 : Croft Micro 25 : Decware ZStage
Power Amps PrimaLuna ProLogue 5 (KT120) : PrimaLuna ProLogue 4 (KT77)
Speakers The Edingdale : Meadowlark Hot Rod Shearwater
Room Acoustic Artnovion absorbers & diffusers : Sonarworks & Dirac dsp
I take it these only work if you are using a pc to run SC?
Location: London, UK
Posts: 103
I'm Rob.
To be honest, I wasn't expecting these to make any difference but ... I applied the mods while a song was playing, the device rebooted and started the song again and could immediately detect the extra treble detail.
PS. As the mods are applied to the Squeezebox Touch itself, it doesn't matter what computer is being used to run the Squeezecenter software.
Location: Georgia USA
Posts: 15
I'm ed.
Hi all,
Thanks for trying my SB Touch mods.
FYI I update the site from time to time. I included some information about "Tuning" the mod to suit your system.
Enjoy!
Hi Dynobot.
The mods do make an improvement and spending some time tweaking the SPDIF value from the original 59 did make a difference in my system.
Good work sir.![]()
Letting go and relaxing
is the most ‘in control’ thing you can do.
Enjoy being You,
no-one else gets to be that lucky