Moderator
Location: North Down /Northern Ireland/ UK
Posts: 19,484
I'm Neil.
Beautiful work.Originally Posted by speedy.steve
Here's a slightly different one; for a Fidelity Research FR64s with the superb adjustable on the fly VTA armbase.
Made from solid brass, 20mm thick and 170mm long. 2.3Kgs of brass!
This is the first of two I am making.
Now to finish the 2nd one
Perhaps destined for a deck like this?
Regards Neil
Trade: Magna Audio
Location: The New Forest
Posts: 1,861
I'm Steve.
Thanks Neil.
They are for Fordy (Carl). They have to make their way, way overseas but Carl says he will take some pics of them once installed on that amazing deck,but it will take a while.
Last edited by Magna Audio; 12-04-2014 at 06:07.
System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.
Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
For more information about my creations and products please click below
http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/
Trade: Magna Audio
Location: The New Forest
Posts: 1,861
I'm Steve.
Here are a couple of different height arm raisers in Ebony for a PL-71 arm.
Last edited by Magna Audio; 30-10-2017 at 08:27.
System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.
Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
For more information about my creations and products please click below
http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/
Trade: Magna Audio
Location: The New Forest
Posts: 1,861
I'm Steve.
Latest is a bespoke armboard in ebony for SME arm mounting
I also have an Ebony armboard for an FR64x, one in African Blackwood for a Jelco and a special plinth mod / extra armboard pod mount on the go - more on these later.
I'm happy to discuss any project requirements or ideas you might have.
Last edited by Magna Audio; 30-10-2017 at 08:26.
System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.
Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
For more information about my creations and products please click below
http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/
Double Daftee
Location: Essex, UK
Posts: 3,445
I'm Andy.
Latest is a bespoke armboard in ebony for SME arm mounting
I also have an Ebony armboard for an FR64x, one in African Blackwood for a Jelco and a special plinth mod / extra armboard pod mount on the go - more on these later.
I'm happy to discuss any project requirements or ideas you might have.
Fantastic work Steve.
System; Michell Gyrodec SE/ Orbe Clamp/ Gert Pedersen armboard mod/ HR PSU/ SME V / J7 Tonearm cable/Ortofon Cadenza Black// Jez Arkless Turbo nutter B------ /Trichord Dino+
Amplification and loudspeaker set up is at the moment being split into two groups, comprising the following;
1. Same sources as above; SONY TAF-770ES/SONY CDP761E/Cable Talk 3.1 loudspeakercable/ Harbeth Compact7ES2/ Stands
2. Virtue Audio Sensation M451battery PSU, ClarityCaps upgrade/ Sensation M901/Russian PIO caps with Teflon bypass caps upgrade/ JT Dynamic PSU with various tweaks/ Connex Audio 5N Litz loudspeaker cable, Impulse H6 Loudspeakers.
Me so horny- Impulse H6 Horny
Trade: Magna Audio
Location: The New Forest
Posts: 1,861
I'm Steve.
Here's an ebony one done for Mike inc fitting his FR64 arm
He is convinced black sound bestSo dark ebony finish was in order
Last edited by Magna Audio; 30-10-2017 at 08:25.
System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.
Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
For more information about my creations and products please click below
http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/
Senior Member
Location: Surrey
Posts: 4,162
I'm Mike.
100% fact that black sounds best !
I'm hoping to construct a stealth hifi so there will be true blind listening and testing
Lovely work and sounds fabulous.
TAD CD / DAC / Pre, Technics 1210, MCRU PSU, Mike New Bearing & Platter, Stillpoints LP1 weight, Speedy Steve Ebony armboard, Fidelity Research FR64FX arm, Ortofon SPU. Aurorasound VIDA Phono Pre Amp, TAD Power Amp, TAD E1 speakers. Coherent RTZ 3 Grounding box, Coherent grounding cables, Creaktiv racks. Coherent Mains Cables. SR Blue Fuse. Interconnects : Coherent and Yannis 223.5 Connect Litz. Coherent speaker cable. Audio Magic Transcendence Conditioner. Coherent mains socket. Mains Filters : , PS Audio Harvesters, Russ Andrews Purifiers, Tacima, Vertex. Black Ravioli and RDC supports. Electric Beach S1NX platforms for TAD CD and Technics. Ferrite chokes everywhere except the above. Ears, brain
Mike
It's the improvised cardboard 'shutters' over the blue LEDs that spoil the pro look LOL!
Senior Member
Location: Surrey
Posts: 4,162
I'm Mike.
They are 'pro' bits of card tho'
TAD CD / DAC / Pre, Technics 1210, MCRU PSU, Mike New Bearing & Platter, Stillpoints LP1 weight, Speedy Steve Ebony armboard, Fidelity Research FR64FX arm, Ortofon SPU. Aurorasound VIDA Phono Pre Amp, TAD Power Amp, TAD E1 speakers. Coherent RTZ 3 Grounding box, Coherent grounding cables, Creaktiv racks. Coherent Mains Cables. SR Blue Fuse. Interconnects : Coherent and Yannis 223.5 Connect Litz. Coherent speaker cable. Audio Magic Transcendence Conditioner. Coherent mains socket. Mains Filters : , PS Audio Harvesters, Russ Andrews Purifiers, Tacima, Vertex. Black Ravioli and RDC supports. Electric Beach S1NX platforms for TAD CD and Technics. Ferrite chokes everywhere except the above. Ears, brain
Mike
Trade: Magna Audio
Location: The New Forest
Posts: 1,861
I'm Steve.
Here's an African Blackwood armboard fitted with the uprated Jelco arm collar.
This one has been stained to be dark similar to Ebony. Matching black domed capheaded bolts and a shortened allen key to enable arm fitting.
You may wonder the difference between African Blackwood and Ebony. Both are hard and dense. African Blackwood is not quite as dark in natural state. It is denser and harder with a tighter / almost no grain its so dense. Due to this it machines and drills very well indeed.
I can't say what acoustic difference there is between them though, as I've never had the opportunity to listen to them back to back on identical equipment.
Here it is mounted (to ensure perfect fitting) on my scruffy test SL-1200 deck.
Last edited by Magna Audio; 30-10-2017 at 08:24.
System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.
Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
For more information about my creations and products please click below
http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/
Posting Permissions
Reply With Quote
