Hi Alan
That was the other option i mentioned
Easier than the Khozmo remote and on par in terms of quality.
Should I ever build another dcb1 that's what I'll use.
Hi Alan
That was the other option i mentioned
Easier than the Khozmo remote and on par in terms of quality.
Should I ever build another dcb1 that's what I'll use.
Last edited by STD305M; 10-09-2019 at 18:15.
Turntable; Rega p8
Cartridge; Alpheta mc
Phono Stage; Rega Aria, Bigbottle 3 mm/mc
Amplifier; Rega Elicit
Speakers; Rega Rx3
Location: Kilmarnock, Ayrshire, Scotland
Posts: 533
I'm stuart.
Garrard 401, Jelco 750 with Shuggie, Ortofon 2M Black / ZYX Yatra 100, Project Phono RS with Sigma22 Linear PS, RPi3 + DigiOne + Linear PS, RPi3/1Tb SSD with PiCorePlayer + Linear PS, Perreaux Eloquence 250i 40th Anniversary with ES9038Pro DAC, DCG3 Pre-Amp, Neurochrome 8x2 Pre-Amp, Neurochrome 686 Power amp, Benchmark DAC2 HGC, Primare V25 CD player, Monitor Audio PL300, Sjostrom DCT03 DC Blocker.
https://www.ebay.co.uk/itm/AC-DC-9V-....c100005.m1851
https://www.ebay.co.uk/itm/AC-DC-9V-....c100005.m1851
Ditch the cheap volume control and just wire the motor leads to the motor on the Acoustic Dimension unit.
Surely putting it in an elegant case is vanity, if it needs air circulation to cool it. It's there to sound good; don't affect that aspect. Perhaps you could aerate (grille?)the underside of that case and have a couple of holes in the upper for exit?
i liked both my Pass pre and the Stereo Coffee (with remote!) but my Hafler DH101 sounds as good.
Chris.
Location: Kilmarnock, Ayrshire, Scotland
Posts: 533
I'm stuart.
Alan, I presume that controller will also work with the TKD motorised pots?
Garrard 401, Jelco 750 with Shuggie, Ortofon 2M Black / ZYX Yatra 100, Project Phono RS with Sigma22 Linear PS, RPi3 + DigiOne + Linear PS, RPi3/1Tb SSD with PiCorePlayer + Linear PS, Perreaux Eloquence 250i 40th Anniversary with ES9038Pro DAC, DCG3 Pre-Amp, Neurochrome 8x2 Pre-Amp, Neurochrome 686 Power amp, Benchmark DAC2 HGC, Primare V25 CD player, Monitor Audio PL300, Sjostrom DCT03 DC Blocker.
I would guess so if the motor is the same at 5V.