+ Reply to Thread
Results 11 to 14 of 14

Thread: 12" Full Range Driver

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date: Aug 2016

    Location: Sussex, UK

    Posts: 238
    I'm Martin.

    Default 12" Full Range Driver

    Hi All,

    Found this FR 12" driver on the nevernet the other day.

    Be interested in any comments on the Freq Curves and Specs.

    I have ordered two pairs in via air freight. These units are $22USD each direct from works. I will let you know what they sound like if interested. BR Martin

    GENERAL SPECIFICATIONS
    Nominal diameter 305(12) mm (in.)
    Nominal impedance 8 Ω
    Minimum impedance 5.8 Ω
    Program power (1) 300 W
    AES Power rating(2) 150 W
    Sensitivity (3) 97.5 dB
    Frequency range 74 ~ 16000 Hz
    Voice coil diameter 50(2) mm (in.)
    Chassis material Steel
    Magnet material Ferrite
    Magnet dimensions (ODxIDxh) 156 x 80 x 20 mm
    Coil material CCAW
    Former material Glass Fiber
    Xmax(4) 3 mm
    Xmech(5) 7 mm
    Gap height 8 mm
    Voice coil Wingding height 10 mm

    SMALL SIGNAL PARAMETERS
    DC resistance(Re) 5 Ω
    Resonance frequency(Fs) 74 Hz
    Moving mass(Mms) 32 g
    Compliance(Cms) 0.14 mm/N
    Force factor(BL) 11 N/A
    Mechanical Q-factor(Qms) 6.5
    Electrical Q-factor(Qes) 0.77
    Total Q-factor(Qts) 0.69
    Equivalent air volume(Vas) 62 I
    Voice coil Inductance(Le) 0.70 mH
    Diaphragm area(Sd) 533 cm2
    Reference efficiency(Eta O) 3.2 %
    Attached Images Attached Images

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •