I would take either of my Ikeda arms (IT-407 or IT-345) or a FR64S over an SME V any day.
I wouldn't argue any of them are the best arm in the world regardless of price but all make wonderful music and work beautifully on a TD124.
I would take either of my Ikeda arms (IT-407 or IT-345) or a FR64S over an SME V any day.
I wouldn't argue any of them are the best arm in the world regardless of price but all make wonderful music and work beautifully on a TD124.
You cannot judge an arm on its own really; it has to be considered alongside the cartridge of choice. Having owned many high end arms, I settled on the SME IV as it sounds excellent with my deck and a range of cartridges; it is a doddle to align and it stays set up for good. I want an arm to be neutral.
Main system: Sony TTS8000; AT1010; Audio Technica Art1; The Lentek; Cambridge 851n, Yamaha NS1000.
System 2 - SBT; Technics SH-X1000 DAC; Denon PMA-850
Main system: Sony TTS8000; AT1010; Audio Technica Art1; The Lentek; Cambridge 851n, Yamaha NS1000.
System 2 - SBT; Technics SH-X1000 DAC; Denon PMA-850
Audiocraft AC-3300/4400.
I have quite a few others, including FR64s which is a great arm for the low compliance cartridges, but the AC just has something about it and is so versatile (different arm wands).
Never really liked the later SMEs which is a pity given their heritage.
Regards
Gerry
I think you have to consider the arm, cartridge AND the deck, AND what the deck is placed on.
Any TT setup is a highly sensitive resonant system, and it is the sum of the parts and how they all interact with each other.
Unfortunately, it is the sensitivity of the cartridge that has to fight with these complex resonant interactions and it "hears" what is going on and plays it back to you.
It simply isn't accurate. But that's not to say it can't sound great.
The point is whilst an arm might sound great on one TT, it may not on another.
A Five will not allow Ks to perform at their best, Barry. Adequately, maybe. Likewise Miyajima and other very low compliance cart's; they need a more massy arm than the SME. Something in the region of 20g eff. mass (or more for Miyajimas and others) would elicit the Ks' full potential; especially the stone-bodied ones.
Difficult to make a decent comparison, as the deck and arms changed, but my Urushi Vermillion simply took off when mounted in 12" PU7 and Ace Anna, both with an approx. eff. mass of 14/15 g (only 3/4 g more than the Five), though the arm length probably benefitted as well.
Location: Ontario
Posts: 6
I'm Jim.
Thanks for everyone's suggestions.
Whats your opinion on a vintage Ortofon Rmg212 tonearm? Are they only good with Ortofon Spu and Square Ort cartridges?
What arm would you suggest for those other 3tables?
I had the Japanese 1990s RMG 309i reissue - this is a superb arm. However I would have my doubts about the vintage ones from the 60s (likely would need restoration) and the 9in RMG 212 I'd avoid altogether as it has no anti-skate - with the 12in arm you can get away with this but not on a 9in arm unless you are using ancient mono cartridges at 5g+ tracking. Curiosity value only.
Lenco projects are many and varied. There are a few useful arms that drop in with no or minimal modification to the Lenco 75 - tons of info on Lenco Heaven forum- but for optimum performance you need to junk the top plate and go to a PTP design - again tons of info on Lenco Heaven, if you want to talk Lenco that's the place to do it, serious Lenco experts over there who have seen and done everything you could imagine with these decks, but do have a good read around first as pretty much any question you could ask has already been answered and many many builds documented. It's a wonderful resource on this topic.
With an SP15 the 'classic' combo is the Technics EPA-100, but personally I'd go for a Japanese broadcast arm like an ATP12T / AT1503 (I have an AT1503 Mk1, co-developed by AT and NTT for broadcast use, on my Garrard 401), there are many others around from Denon, JVC, SAEC, Audiocraft ... easy to spend up to whatever budget you set. FR64 remains an option as well, perhaps the later FR64fx would be a good option for the SP15.