+ Reply to Thread
Page 3 of 3 FirstFirst 123
Results 21 to 27 of 27

Thread: Joror's DIY Audio projects

  1. #21
    Join Date: Mar 2018

    Location: Sofia- Bułgaria

    Posts: 21
    I'm Georgi.

    Default

    I am approaching to the measurement of the internal volume:
    From waste material I made this gadget ,that takes part in the measurements and when assembling the cabinet:/p-4,5/
    Attached Images Attached Images

  2. #22
    Join Date: Mar 2018

    Location: Sofia- Bułgaria

    Posts: 21
    I'm Georgi.

    Default

    I have to make another post, sorry!

    My method of finding an internal volume of a complex construction was discovered long ago,
    the answer was given so many years ago,/about 2500/ of the Archimedes genius!
    The volume per liter of water is equal to the volume of 1 kg. and 1l. Water = 1 kg,
    -their specific resistances are the same, with very little error.
    I will say it in a more understandable way:
    - if we have 20 liters of water in a bucket, this bucket will weigh approximately -20 kg.
    - if we have another liquid in this bucket, we may have 20 liters, but we will not have 20 pounds.
    In my method of measurement, i do not immerse the inner construction in the water, just I measure the weight and deduct it from the total volume.
    There is no simpler and more accurate method for finding the volume of a complex body,
    Archimed's method is flawless!

    Any other material we use to fill, we need to know the "ro" of this material.
    On the second picture,the red line is the waterline, the vas of cabinet must be fill with water next to it / everything must be perfectly horizontally!/.
    Attached Images Attached Images

  3. #23
    Join Date: Jan 2009

    Location: Sheffield - UK

    Posts: 5,925
    I'm Mark.

    Default

    Remarkable work - well done!

    100% Analogue

  4. #24
    Join Date: Mar 2010

    Location: Sheffield

    Posts: 2,547
    I'm Simon.

    Default

    Stunning work, that's a real commitment to a big project.
    Kuzma Stabi/S 12", (LP12-bastard) DC motor and optical tacho psu, Benz LP, Paradise (phonostage). MB-Pro, Brooklyn dac and psu, Bruno Putzeys balanced pre, mod86p dual mono amps, Yamaha NS1000m

  5. #25
    Join Date: Mar 2018

    Location: Sofia- Bułgaria

    Posts: 21
    I'm Georgi.

    Default

    Quote Originally Posted by YNWaN View Post
    Remarkable work - well done!
    Thank you!

  6. #26
    Join Date: Mar 2018

    Location: Sofia- Bułgaria

    Posts: 21
    I'm Georgi.

    Default

    Quote Originally Posted by sq225917 View Post
    Stunning work, that's a real commitment to a big project.
    Thank you for the evaluation of my DIYers work!

  7. #27
    Join Date: Mar 2018

    Location: Sofia- Bułgaria

    Posts: 21
    I'm Georgi.

    Default

    And I am approaching to the measurement of the internal volume:
    I measure the weight of the my vented inner construction - 3.5 kg.
    -The amount of water is 42 l. in the box; the average value relative to the density of MDF is 0.75 kg. of a cubic decimeter,3,5/0,75=4,7l, 42-4,7l= 37.3l more than what's needed - what's next?
    The problem is that my investor likes the vision of the column.The decrease in volume must occur inside the construction of the cabinet.This sends the project in a more initial phase,we have a new requirement for the project, another W18 EX001.The old project stayed in the past ...
    Attached Images Attached Images
    Last edited by jororaitchev; 20-04-2018 at 19:03.

+ Reply to Thread
Page 3 of 3 FirstFirst 123



 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •