Bakoon 13r Denon DP80 Stax UA-70 Shure Ultra 500 in a Martin Bastin body with jico stylus, project ds2 digital Rullit aero 8 field coils in tqwt speakers
Office system, DIY CSS fullrange speakers with aurum cantus G2 ribbons yulong dac Sony STR6055 receiver Jvc QL-A51 direct drive turntable, Leema sub. JVC Z4S cart is in the house
Garage system another Sony receiver, cassette deck
System components are subject to change without warning and at the discretion of the owner.
Jesus, for a moment I thought it's the Terminator! (http://www.trans-fi.com/terminatortonearm.htm)
Don't you just hate it when you cannot detect where the post ends and a signature line begins?
Alex.
Location: Melksham, Wiltshire
Posts: 731
I'm Peter.
Location: Canaries
Posts: 193
FWIW I had a 103Pro for some time about 10 years ago, bought direct from Juki2 but it never sounded special in my Ittok LVIII but then neither did a 304 either. In fact it wasn´t till I ditched my Black Cube SE and then my Linto and I switched to a valve phono with its obscenely OTT power supply that anything sounded special. I now use a Troika retip and my recently retipped but ancient A&RP77 which gives it a run for its money. Oh dear, wasted youth where art thou ?
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!
Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!
Location: Bucks
Posts: 97
I'm My.
I've got the Jelco, had a 103, 130LCII and 301 MK2 and they were all excellent with it. The arm is so universally suitable (!), With the ability to change headshells to suit the cartridge, allowing you to get the effective mass dead on. Where it isn't possible to nail the synergy between the two components, the damping can be played with too.
I'm using a modded (refurbished) TT that looks a lot like Systemdek IIX. The guy who sold it to me called in Frankenstein, because he got it on commission from the original tweaker, but he agrees that it is most likely Systemdek IIX. But looks like the plinth has been upgraded, as well as the top part and the platter.
I've removed the bottom plate and dampened it with Dynamat.
Don't you just hate it when you cannot detect where the post ends and a signature line begins?
Alex.
Ok, and what cartridge, amp and/or phono stage have you currently got?
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!
Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!
Location: Vancouver, BC
Posts: 21
I'm Steve.
Alex, have you seen this post for a slip over aluminum body. Great upgrade without having to take your cartridge apart.
http://theartofsound.net/forum/showt...266#post956266