I also found something like that, but I do not know if it will be good enough
Location: Belfast, United Kingdom
Posts: 34
I'm Artur.
I also found something like that, but I do not know if it will be good enough
In my experience, anything is better than nothing. You really wanna try dampening the plinth and the chassis on your TT. Just do it with whatever is at hand, then sit down and listen. If, after doing that, you don't find your jaw on the floor, simply remove the damping sheets and you'll be back to 'normal'
Don't you just hate it when you cannot detect where the post ends and a signature line begins?
Alex.
Location: Belfast, United Kingdom
Posts: 34
I'm Artur.
This is in reference the Jolida JD9 comment. While I enjoy reading comments on all forms of kit including Jolida, I feel an adjustment needs to be noted here - for reader benefit. Some may know my history of Joilda - I have modified many, sold them standard in the past, have copies of the circuits and even asked the Jolida owner direct due to such posts to check I'm not wrong in my view and understanding.
The Jolida JD9 output stage is active. The output stage is the exact same stage as found in the Jolida JD5T preamplifier which has no opamps / solid state gain stages. It only produces 10dB of gain - it is not a buffer stage. Dropping in 5751 or 5755 valves (with adaptors) will drop the gain a little.
Last edited by Open Door; 20-04-2018 at 23:19. Reason: grammar and 1 small addition