Has anyone got any experience of one of these?
I'm thinking of putting one in my amp but worried the dimensions are correct in the link?
Its gonna be tight!
https://www.hificollective.co.uk/att...ttenuator.html
Location: Bristol
Posts: 339
I'm Tony.
Has anyone got any experience of one of these?
I'm thinking of putting one in my amp but worried the dimensions are correct in the link?
Its gonna be tight!
https://www.hificollective.co.uk/att...ttenuator.html
VPI Scout 1.1, Hana ML, Vanderveen MC10 SUT, WAD Phono3, Rpi3B+/Digione Signature, Xiang Sheng DAC-01, WAD KiT6550 and Reiver Edingdale SR
Hi.
Yes, I've been using one for a good couple of years now... and had the previous version too.
Great sounding, excellent build quality too.
Hope that helps
Ultrafide U500DC power amplifier - Croft Vitale )highly modified) - TRIO L-07D Turntable - Denon DL103C1 - Funk Firm Houdini - Lentek MC head amp - 15" Tannoy Monitor Gold Loudspeakers in Lockwood Major cabinets (From Trident Studios) - Tannoyista SPEC 3 Custom Crossovers - VanDamme Black Speaker Cable
Tannoyista.com - Audio Equipment Reviews
Location: Bristol
Posts: 339
I'm Tony.
Location: Bristol
Posts: 339
I'm Tony.
body dimension: 52mm (height, including exposed PCB) x 42mm (width) x 50mm (depth, front to back)
VPI Scout 1.1, Hana ML, Vanderveen MC10 SUT, WAD Phono3, Rpi3B+/Digione Signature, Xiang Sheng DAC-01, WAD KiT6550 and Reiver Edingdale SR
Hi. Not without taking the lid off my preamp, but they sound about right.
The dimensions will be on hificollective too as they sell them
Ultrafide U500DC power amplifier - Croft Vitale )highly modified) - TRIO L-07D Turntable - Denon DL103C1 - Funk Firm Houdini - Lentek MC head amp - 15" Tannoy Monitor Gold Loudspeakers in Lockwood Major cabinets (From Trident Studios) - Tannoyista SPEC 3 Custom Crossovers - VanDamme Black Speaker Cable
Tannoyista.com - Audio Equipment Reviews
Location: London
Posts: 685
I'm James.
Got the Mk 1 and they are large. I was looking to replace an Alps Blue in summat with a Mk2 and there was no way to do it (nor indeed with any of the available alternatives on flea bay though several came closer in size). This is a limitation of stepped attenuators in general I suspect, a pity as the Khosmo is excellent otherwise.
Sent from my GT-I9195 using Tapatalk
Yup, but I suspect that the Khozmo was mainly designed for use in DIY projects, where one customizes the casing accordingly, in order to successfully accommodate it, rather than being fitted as an aftermarket upgrade to an existing pre-amplifier, where space restrictions may apply.
Also, stepped attenuators almost always take up more room than pots. I had to drill out the casing in the Croft, in order to get my DACT stepped attenuator to fit. Anyway, Tony, if you can successfully accommodate the Khozmo, I think you'll be in for a nice sonic upgrade!
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!
Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!
Location: Bristol
Posts: 339
I'm Tony.
Well we measured up some free space below the 100B's tranny and if we use an extender rod its doable.
I now just need to decide whether to ditch the Triode mode and stick with Ultra Linear in the Yaqin as this way we can reduce the signal path.
Thanks for the feedback
VPI Scout 1.1, Hana ML, Vanderveen MC10 SUT, WAD Phono3, Rpi3B+/Digione Signature, Xiang Sheng DAC-01, WAD KiT6550 and Reiver Edingdale SR
Location: Bristol
Posts: 339
I'm Tony.
Just as a follow up my tech just sent me the following email regarding the Khzomo, 'I'm just wiring the volume knob and I took the opportunity to test the ohmmeter. Incredibley both are identical to 0 ohms to almost 10K, then there is a difference of less than one to 2 hundredth from ohms to about 30K and only 0.07 ohms to 50K. It's a very, very good potentiometer'
VPI Scout 1.1, Hana ML, Vanderveen MC10 SUT, WAD Phono3, Rpi3B+/Digione Signature, Xiang Sheng DAC-01, WAD KiT6550 and Reiver Edingdale SR