Originally Posted by
Beobloke
It's the original. They sanded 18mm off the top of the old plinth, which got to the lowest point of the damage and repaired the bumps to the sides. They then fitted a new 18mm thick piece of Oak to the top, machined the cutouts for the arm, motor and switches, then re-veneered the top and sides and sprayed it all black.
It's absolutely flawless in the flesh and the veneer is better than the original. I am a happy chappy!
probably used a drum sander to remove that amount of material. I must admit I would have ditched it.
Bakoon 13r Denon DP80 Stax UA-70 Shure Ultra 500 in a Martin Bastin body with jico stylus, project ds2 digital Rullit aero 8 field coils in tqwt speakers
Office system, DIY CSS fullrange speakers with aurum cantus G2 ribbons yulong dac Sony STR6055 receiver Jvc QL-A51 direct drive turntable, Leema sub. JVC Z4S cart is in the house
Garage system another Sony receiver, cassette deck
System components are subject to change without warning and at the discretion of the owner.