If it is an M2.5 nut, it should be 5mm across the flats, so something like this will be good https://www.amazon.co.uk/Wera-Kraftf...5mm+nut+driver
If it is an M2.5 nut, it should be 5mm across the flats, so something like this will be good https://www.amazon.co.uk/Wera-Kraftf...5mm+nut+driver
Kevin
Too busy enjoying the music....
European loan coordinator for Graham Slee HiFi system components..
Cheers Kev,
to be sure I have bought these
https://www.amazon.co.uk/driver-smal...K9M54ESTZNZK9R
Main system : VPI Scout 1.1 / JMW 9T / 2M Black / Croft 25R+ / Croft 7 / Heco Celan GT 702
Second System : Goldring Lenco GL75 / AT95EX / Pioneer SX590 / Spendor SP2
Just remember that M2.5 has a torque requirement of 1.43 Nm, which is not very much at all....
Kevin
Too busy enjoying the music....
European loan coordinator for Graham Slee HiFi system components..
Those are socket head drivers that you've ordered, like allen keys, not spanners, they won't tighten nuts. The link you were shown was the correct item. Unless you really want socket head drivers, cancel the order and get something else.
Last edited by walpurgis; 21-01-2018 at 10:53. Reason: typo
Well spotted Geoff.
Kevin
Too busy enjoying the music....
European loan coordinator for Graham Slee HiFi system components..
I take it you have allen keys to hold the bolt heads still as you tighten the nuts? Assuming of course that they are socket head bolts.
Main system : VPI Scout 1.1 / JMW 9T / 2M Black / Croft 25R+ / Croft 7 / Heco Celan GT 702
Second System : Goldring Lenco GL75 / AT95EX / Pioneer SX590 / Spendor SP2