Possibly after a new amp for my dali epicon 2's and wonder what's available.
Budget is around £700 thanks. : )
Location: Edinburgh
Posts: 105
I'm Craig.
Possibly after a new amp for my dali epicon 2's and wonder what's available.
Budget is around £700 thanks. : )
the leema pulse is a lovely organic sounding amp that is very enjoyable . one here from well known shop frank harvey in coventry
https://www.ebay.co.uk/itm/Leema-Aco...gAAOSw3HJZiuW5
ou might slip, you might slide, you might
Stumble and fall by the road side
But don't you ever let nobody drag your spirit down
Remember you're walking up to heaven
Don't let nobody turn you around
… Walk with the rich, walk with the poor
Learn from everyone, that's what life is for
And don't you let nobody drag your spirit down
Eric Bibb
Location: Edinburgh
Posts: 105
I'm Craig.
Hi Phil yip I had seen that one but wasn't sure about the looks do you think the Dali's need power as I thought I might try a tube amp but not sure with the pairing?
ou might slip, you might slide, you might
Stumble and fall by the road side
But don't you ever let nobody drag your spirit down
Remember you're walking up to heaven
Don't let nobody turn you around
… Walk with the rich, walk with the poor
Learn from everyone, that's what life is for
And don't you let nobody drag your spirit down
Eric Bibb
Location: Glasgow, UK
Posts: 2,076
I'm Tony.
I'm using a Pulse SRA-160USB to run a pair of Dynaudio Audience 72s that I've just bought and they sound amazing, the amp cost me £60 SH or about £110 new delivered.
Alan Shaw, the Harbeth speaker designer, actually recommends this amp and similarly priced ones (Pioneer I think) for his speakers.
Location: Edinburgh
Posts: 105
I'm Craig.
Thanks but I am really after something higher end to replace my arcam avr 600 as I am going back to two channel. I had a bladelius thor in the past and wish I had kept it if I am honest as it had loads of power on tap.
Location: Glasgow, UK
Posts: 2,076
I'm Tony.
Fair enough, I've had some decent amps (stereo amps including a Sugden A21a and P21a and a Quad 34/306 combo) and the Pulse is up there with the best of them.
BTW, the speakers are a 4ohm load and need decent power and according to a mate of mine the Pulse circuit was designed around a copy of Quad amps circuits.
Location: Edinburgh
Posts: 105
I'm Craig.
Hi Alex I will send you a pm regarding the arcam.
No one got a solid state amp they are looking to move on that will get the best from my Dali's thanks?