I came across pair of NOS E88CC Tesla with gold pin and marked with Crossed Swords and red tips.
One I put into my SW1X DAC 1 and the other into my RWA Valve HPA
The improvement was astounding
Location: Solihull
Posts: 716
I'm Martin.
I came across pair of NOS E88CC Tesla with gold pin and marked with Crossed Swords and red tips.
One I put into my SW1X DAC 1 and the other into my RWA Valve HPA
The improvement was astounding
Lumley Heliosphere Audiomods 5
Voyd Valdi AN Arm 1 V2 and Denon MC
Audiomeca Talisman Highly Modded
Audiomeca Kreatura &,SW1X DAC1
Hovland HP200 MC
Hovland Radia
Ming Da 805 monos
Magnum Dynalab Etude, RWA Cassabria + LCD 3
Wilson Benesch Actors
Cables by Cardas, Hovland G3 and Yter
Location: Solihull
Posts: 716
I'm Martin.
Rummaging around in my valve box I have come across a pair of Mullard ECC88
I remember using these in an X-Box HPA
They are supposed to be a close pair and certainly produced much improved results
I do not have access to a tester so I do not know how much life they have.
Tom........... Yours to try for postage if you want
Lumley Heliosphere Audiomods 5
Voyd Valdi AN Arm 1 V2 and Denon MC
Audiomeca Talisman Highly Modded
Audiomeca Kreatura &,SW1X DAC1
Hovland HP200 MC
Hovland Radia
Ming Da 805 monos
Magnum Dynalab Etude, RWA Cassabria + LCD 3
Wilson Benesch Actors
Cables by Cardas, Hovland G3 and Yter
"lack of passion is fatal"
Vinyl: Thorens TD-124mk2 / SME-312 Aluminium 'special' / SME M2-9R / STEREO: Etsuro Urushi Cobalt / Shure M3D / Ortofon SPU A95 / Cartridge Man Music Master / Shure - SC35C (US) / SAEC C3 MC MONO: Miyajima Zero B 0.7mil mono / Miyajima Premium 1.0 / Amps & SUTs: Radford STA25 mk3 / AD Audio 'Satchmo2' pre & LCR phono / Hashimoto HM-7 SUT / ETR-MONO SUT Digital: Audio Note 4.1 (with DAC5 upgrades) DAC / Roon / Tidal Speakers: Tannoy 12" MGs' in RFC custom 'Rutland' Cabinets with RFC crossovers / Tannoy ST-100 Super Tweeters Cables: LFD Grainless phono / RFC Mercury / Duelund DCA16GA tinned copper / Kimber 12TC / SW1X Audio Design USB-SPdif / Duelund DCA20GA interconnects / SW1X Audio SPDIF Aero 6 / Mains Power Conditioner / Box Furniture rack / Audiodesk Systeme Vinyl Cleaner / a very beautiful & understanding Wife!
Location: Solihull
Posts: 716
I'm Martin.
Hi Adam .....Yes I reckon so. First my SW1X was changed to the lower output setting by Slawa and I did find his Russian tube a little coarse.
I swapped to a gold pin Brimar E88CC and found that much more to my taste
Then the Teslas came my way and I thought I would take a chance as they were a matched pair and would be saleable if I did not like them.
Much more detail and ambience so they were a good buy.
Lumley Heliosphere Audiomods 5
Voyd Valdi AN Arm 1 V2 and Denon MC
Audiomeca Talisman Highly Modded
Audiomeca Kreatura &,SW1X DAC1
Hovland HP200 MC
Hovland Radia
Ming Da 805 monos
Magnum Dynalab Etude, RWA Cassabria + LCD 3
Wilson Benesch Actors
Cables by Cardas, Hovland G3 and Yter
Hi Martin - thanks hugely for the offer but my Radford won't be ready for a month or two yet, so I won't have anything to try the valves out in until the New Year - happy if you extend to loan to Adam instead.
All this valve talk is really displacement activity on my part while it waits its turn on Will's bench.
"lack of passion is fatal"
Vinyl: Thorens TD-124mk2 / SME-312 Aluminium 'special' / SME M2-9R / STEREO: Etsuro Urushi Cobalt / Shure M3D / Ortofon SPU A95 / Cartridge Man Music Master / Shure - SC35C (US) / SAEC C3 MC MONO: Miyajima Zero B 0.7mil mono / Miyajima Premium 1.0 / Amps & SUTs: Radford STA25 mk3 / AD Audio 'Satchmo2' pre & LCR phono / Hashimoto HM-7 SUT / ETR-MONO SUT Digital: Audio Note 4.1 (with DAC5 upgrades) DAC / Roon / Tidal Speakers: Tannoy 12" MGs' in RFC custom 'Rutland' Cabinets with RFC crossovers / Tannoy ST-100 Super Tweeters Cables: LFD Grainless phono / RFC Mercury / Duelund DCA16GA tinned copper / Kimber 12TC / SW1X Audio Design USB-SPdif / Duelund DCA20GA interconnects / SW1X Audio SPDIF Aero 6 / Mains Power Conditioner / Box Furniture rack / Audiodesk Systeme Vinyl Cleaner / a very beautiful & understanding Wife!
Location: Solihull
Posts: 716
I'm Martin.
Lumley Heliosphere Audiomods 5
Voyd Valdi AN Arm 1 V2 and Denon MC
Audiomeca Talisman Highly Modded
Audiomeca Kreatura &,SW1X DAC1
Hovland HP200 MC
Hovland Radia
Ming Da 805 monos
Magnum Dynalab Etude, RWA Cassabria + LCD 3
Wilson Benesch Actors
Cables by Cardas, Hovland G3 and Yter
Location: Denbigh, N. Wales
Posts: 107
I'm Mark.
Greetings,
While military gold pin E88C made by Tesla are nice valves, there are better valves that match the character of the DAC I, in my book. I could highly recommend the Russian 6N6P valves from the late 50s or early 60s with a square getter made by Foton factory. Those valves have the most gorgeous, sonorous & full mid that I heard from a low/mid mu, noval format tubes.
The other less relaxed alternative would be the 6N1P from the 60s or 6N5P from the late 50s. Those valves have a very dynamic sound character in our circuit and have nice and full mid bass.
S
SW1X Audio DesignTM ... Finest Audio Components ... Designed and Handcrafted in England
www.SW1XAD.co.uk
One more thing Martin, the 6N6Ps you had were from the 80s. Those valves have a much thinner sound character, with a slight tilt towards the top end.
S
SW1X Audio DesignTM ... Finest Audio Components ... Designed and Handcrafted in England
www.SW1XAD.co.uk