+ Reply to Thread
Results 1 to 5 of 5

Thread: Power supplies ?

  1. #1
    Join Date: Apr 2014

    Location: swansea

    Posts: 483
    I'm gerald.

    Default Power supplies ?

    I know you can buy upgraded power supplies to different bits of kit ,So anyone tried a lab quality power supply thats has adjustable volts and amps so anyone tried one and what where the results ?

  2. #2
    Join Date: Apr 2014

    Location: swansea

    Posts: 483
    I'm gerald.

    Default

    Anyone ?

  3. #3
    Join Date: Sep 2013

    Location: North Island New Zealand

    Posts: 1,757
    I'm Chris.

    Default

    Yes, a power supply when designed correctly removes as much ripple from the incoming rectification as is possible, it makes that direct current available in usually lower regulated voltage and current form.

    Rectification whilst commonly done with diodes can also be done with valves, or even mosfets using the excellent LT4320
    integrated circuit.

    Common so called regulators are the 78XX series, but these are poor for audio use. Rather a combination of series and sometimes shunt regulation achieves better results. The best types of supply will have both voltage and current regulation as well as extensive protection as well as load sensing and correction.

    A study of Walt Jungs excellent articles is a must. http://www.waltjung.org/waltsblog/regs/

    Results with these types of supply, in my opinion are always far better than off the shelf so called regulators, or for that matter what is offered internally in audio equipment.

    Hope that helps. Cheers / Chris

  4. #4
    Join Date: Apr 2014

    Location: swansea

    Posts: 483
    I'm gerald.

    Default

    Cheers Chris so is that a yes or no as I have very little knowledge of electronics give me a engine any day of the week.

  5. #5
    Join Date: Sep 2013

    Location: North Island New Zealand

    Posts: 1,757
    I'm Chris.

    Default

    Hi Gerald
    Yes its a Yes

    Funny you mention engines, I had many years building Mazda rotary engines.

    A few good places to learn a bit about electronics online is
    Colin Mitchells Talking Electronics http://talkingelectronics.com/te_interactive_index.html
    Colin has a practical approach which helps you to build circuits.

    Or if you are into books https://www.amazon.com/Art-Electroni.../dp/0521809266
    is a pretty good place to start.

    But electronics is also about finding new ways of doing things too.

    Cheers / Chris

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •