Aqvox USB Linear Power Supply - Type A
Low-Noise 5V Isolated Linear Power Supply— For USB DACs or USB-Devices USB Audio interfaces
£50 delivered by RM 1st class signed for.
Aqvox USB Linear Power Supply - Type A
Low-Noise 5V Isolated Linear Power Supply— For USB DACs or USB-Devices USB Audio interfaces
£50 delivered by RM 1st class signed for.
Thanks Paul- I'll have that if ok with you.
Will send PM
Current: [P20] Roon/Tidal > Custom PC> Chevron Paradox NDF16 > Phast Pre > Neuro. 686 > Tannoy Berkley (RFC tweaks)
That was quick! Thanks Edward.
Current: [P20] Roon/Tidal > Custom PC> Chevron Paradox NDF16 > Phast Pre > Neuro. 686 > Tannoy Berkley (RFC tweaks)
Good luck with the hack. I've replied to your pm now.
Location: London/Durham
Posts: 6,881
I'm Lawrence.
Could I recommend to mate it to the card with a female usb socket plus some wiring I get upset when I see nice PSUs hacked to fit? Holds it's value better as well
I'll try my best Lawrence. I'll sus out what to do when I get it. CPC will likely have something to fit. Or just use any old USB cable I have lying around. Plenty in the glovebox in the car. I already have the screw-in connector for the computer side.
Don't want to upset you Lawrence.
Current: [P20] Roon/Tidal > Custom PC> Chevron Paradox NDF16 > Phast Pre > Neuro. 686 > Tannoy Berkley (RFC tweaks)
Paul
Just to say thanks for the PSU which arrived today. Really well packed.
Did not have to hack things around on the PSU. Just used a spare USB cable, snipped that and wired it to the Paul Pang USB card.
All working. Need to settle the USB card for a while as it has not been used for about 2 years.
The PSU measures a steady 5.1v
Current: [P20] Roon/Tidal > Custom PC> Chevron Paradox NDF16 > Phast Pre > Neuro. 686 > Tannoy Berkley (RFC tweaks)
Thanks for the update Edward. I'm glad it arrived safely and that you found a way to use it without hacking it about. I hope it works out well for you from a sq perspective.