+ Reply to Thread
Results 1 to 3 of 3

Thread: Thorens TD124 arm board

  1. #1
    Join Date: Apr 2011

    Location: Dublin

    Posts: 190
    I'm Simon.

    Default Thorens TD124 arm board

    Can anyone recommend a source for a sensibly priced sme cut arm board for a TD124?

    I've found a couple supplies on that auction site but have no experience with them.

    Sent from my SM-G930F using Tapatalk
    Source: Thorens TD124 Rega RB300, Sumiko bluepoint No2., Cambridge Audio D500 Special Edition CDP, Squeeze box Touch, PC with Trends Audio USB Audio DAC UD-10 Amplification: Croft Micro 25 basic pre, Leak Stereo 20, Trends Audio Class T TA-10, Fisher X100-A Speakers:Impulse H6 Interconnects: Handmade silver and TNT audio CAT5 speaker cables

  2. #2
    Join Date: Feb 2010

    Location: Berkshire, UK

    Posts: 2,412
    I'm Tom.

    Default

    Speedy Steve (see the trade section) will do one.

    I have an SME cut board in my bits box but too handy to get rid of.
    Main: Speakers 'RFC' Tannoy Canterburys / custom crossovers; Amp - Radford STA100; Pre EAR 912; Vinyl: Thorens TD124 MkII + Ikeda IT345-CR1 / Ortofon 309 Limited tonearms; Cartridges Stereo - Miyajima Madake, Ortofon SPU Royal N + Shure M3D Jico stylus; Mono - Miyajimas - Zero 0.7, Premium 1.0 retipped by Ana Mighty Sound bamboo cantilever, Spirit '78' 3.0 conical from Ana, also vintage GE VRII, Shure M44 strapped for mono with several Expert Stylus conicals for different eras of 78s; Phono stage and SUT from EAR 912; Esoteric Sound Re-Equalizer for equalisation of early mono and 78, switchable in from tape loop; Digital: Audio Note CDT2/II transport, heavily modded AN Kit DAC + Mutec MC3+USB.

    Study: Speakers - Tannoy DC6; Amp: Duncan 'Tuberhunter' 200w class D; preamp - Pass DCB1; Vinyl: Garrard 401 with AT1503 tonearm and vintage SPU-GE; SUTs - Ortofon 2-15k & Bob's Devices; Phono Stage: Schiit Mani; Digital - Trichord Genesis III CDP + Arcam rBlink; Schiit Multibit DAC.

  3. #3
    Join Date: Apr 2011

    Location: Dublin

    Posts: 190
    I'm Simon.

    Default

    Quote Originally Posted by montesquieu View Post
    Speedy Steve (see the trade section) will do one.

    I have an SME cut board in my bits box but too handy to get rid of.
    I never thought about Speedy Steve.

    Actually picked up an uncut armboard from that auction site. Maybe I'll treat myself to a Speedy Steve one when I've settled on an arm.

    Sent from my SM-G930F using Tapatalk
    Source: Thorens TD124 Rega RB300, Sumiko bluepoint No2., Cambridge Audio D500 Special Edition CDP, Squeeze box Touch, PC with Trends Audio USB Audio DAC UD-10 Amplification: Croft Micro 25 basic pre, Leak Stereo 20, Trends Audio Class T TA-10, Fisher X100-A Speakers:Impulse H6 Interconnects: Handmade silver and TNT audio CAT5 speaker cables

+ Reply to Thread



 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •