+ Reply to Thread
Page 1 of 20 12311 ... LastLast
Results 1 to 10 of 197

Thread: Technics SP10 MK2 nearly ready!!!!

  1. #1
    Join Date: Nov 2015

    Location: Wolverhampton

    Posts: 3,751
    I'm Oliver.

    Default Technics SP10 MK2 nearly ready!!!!

    Well, I am two days away from going to collect my new to me SP10. The fella who is making it up for me (new power supply, serviced motor parts etc) it's basically being rebuilt from the bottom up.

    Panzerholz plinth, sexy feet lol. I'm getting a bit excited. Thankfully, after begging for some pics, some have arrived with more to follow tomorrow!!!

    Thought I'd share.





    Sent from my EVA-L09 using Tapatalk
    Technics SP10 MK2 > Phonomac AT-1010 tonearm > ZYX R50 Bloom cartridge > Jolida JD9 MKII > Firebottle Monoblocks > Creek OBH-11SE Headphone Amp > IXOS Speaker Cables > Pioneer CS-77A Speakers

  2. #2
    Join Date: Feb 2016

    Location: Melksham, Wiltshire

    Posts: 313
    I'm Peter.

    Default

    Looks like itís going to be lovely deck !!!!

    Me too getting excited, not the same deck but a Denon DP80. Acrylic / Panzerholz / Lead / MDF combo.

    Arm is the Dynavector DV507 MkII + Benz Wood.

    However some weeks to wait

    Would be nice to have a side by side comparison... LOL.

    Mind you..... no guarantee mine will work as expected, but hopeful.

    What arm have you chosen?????

    Peter


    Sent from my iPad using Tapatalk

  3. #3
    Join Date: Apr 2011

    Location: London

    Posts: 2,715
    I'm Robert.

    Default

    Gonna be a stunner to your lugs Oliver, wood plinth and the Audio Technica AT 1010 tonearm too! You're in for a treat
    My System:
    Amplification - Sansui AU-919 Complete overhaul, upgraded, re-capped. Caps upgraded from 4 x 15,000 uf to 4 x 20,000 uf-inside original oval caps. All glue and 'black flags' removed
    Turntable - Modified Technics SL1210 MK5G
    Mike New precision bearing, bearing base plate, ETP Platter
    Micro Seiki MA-202 tonearm, rewired, hybrid ceramic bearings
    Ortofon Cadenza Black moving coil cartridge
    Yannis Tome 423.5 Silver-Litz tonearm cable with KLEI Pure Silver Harmony plugs
    Ebony armboard
    Audio Technica MS-8 Magnesium headshell, Ortofon pure silver headshell leads
    Isonoe Isolation Feet
    Paul Hynes SR7EHD PSU (plus regulator modules), DCSXL pure-silver DC lead with Jaegar low impedance connector
    CDP - Pioneer PD-91
    Speakers - Mission 752 Freedom
    QED Silver Spiral speaker cable, Airlock plugs - bare wire amp end.
    Mains - Ultra Pure silver plated un-switched socket, Missing link EPS 500 silver plated plugs with Hi-Fi Tuning gold plated silver ceramic 13 amp fuses

  4. #4
    Join Date: Feb 2013

    Location: W Lothian

    Posts: 38,494
    I'm Grant.

    Default

    nice mill

    sure it will be grand
    Regards,
    Grant ....

    I've said it before and I'll say it again: democracy simply-doesn't-work
    .... ..... ...... ...... ................... ..... ..... ..... ..... .....
    DENON DV2900 - TWIN PRO MONOBLOCK AMPLIFIERS - XIANG SHENG DAC\PRE\HEADPHONE AMP - AVANTREE OASIS CLASS 1 BLUETOOTH - AUDIO TECHNICA ATH-MSR7 & OPPO PM-3 PLANAR HEADPHONES - WIN10 JRIVER23, DEEZER HiFi - ECHO DOT - SMSL M6 MINIDAC - FULL RANGE TWIN TELEFUNKEN's - Q ACOUSTIC BT3 actives - CANTON SUB - MAINS REGENERATED AND FILTERED.

  5. #5
    Join Date: Nov 2015

    Location: Wolverhampton

    Posts: 3,751
    I'm Oliver.

    Default

    Quote Originally Posted by Boyse6748 View Post
    Looks like itís going to be lovely deck !!!!

    Me too getting excited, not the same deck but a Denon DP80. Acrylic / Panzerholz / Lead / MDF combo.

    Arm is the Dynavector DV507 MkII + Benz Wood.

    However some weeks to wait

    Would be nice to have a side by side comparison... LOL.

    Mind you..... no guarantee mine will work as expected, but hopeful.

    What arm have you chosen?????

    Peter


    Sent from my iPad using Tapatalk
    Peter,

    I've had a modded by Phonomac Audio Technica 1010 tonearm. It's a package with the SP10. All done by the same guy, Angus (Phonomac) I'd love a DD TT face off lol, I think we will both be VERY happy.

    Robbie,

    I can't wait mate. I'm very excited and I'm going to hear some of his Sansui gear too. Happy days!

    Sent from my EVA-L09 using Tapatalk
    Technics SP10 MK2 > Phonomac AT-1010 tonearm > ZYX R50 Bloom cartridge > Jolida JD9 MKII > Firebottle Monoblocks > Creek OBH-11SE Headphone Amp > IXOS Speaker Cables > Pioneer CS-77A Speakers

  6. #6
    Join Date: Apr 2011

    Location: London

    Posts: 2,715
    I'm Robert.

    Default

    Lol, Well chuffed for you Oliver.
    If I ever went another route it would always have been just as you've done it, a properly overhauled sp10 Mk2 via The Mac.
    I'm too happly with my Techie to go there though.
    My System:
    Amplification - Sansui AU-919 Complete overhaul, upgraded, re-capped. Caps upgraded from 4 x 15,000 uf to 4 x 20,000 uf-inside original oval caps. All glue and 'black flags' removed
    Turntable - Modified Technics SL1210 MK5G
    Mike New precision bearing, bearing base plate, ETP Platter
    Micro Seiki MA-202 tonearm, rewired, hybrid ceramic bearings
    Ortofon Cadenza Black moving coil cartridge
    Yannis Tome 423.5 Silver-Litz tonearm cable with KLEI Pure Silver Harmony plugs
    Ebony armboard
    Audio Technica MS-8 Magnesium headshell, Ortofon pure silver headshell leads
    Isonoe Isolation Feet
    Paul Hynes SR7EHD PSU (plus regulator modules), DCSXL pure-silver DC lead with Jaegar low impedance connector
    CDP - Pioneer PD-91
    Speakers - Mission 752 Freedom
    QED Silver Spiral speaker cable, Airlock plugs - bare wire amp end.
    Mains - Ultra Pure silver plated un-switched socket, Missing link EPS 500 silver plated plugs with Hi-Fi Tuning gold plated silver ceramic 13 amp fuses

  7. #7
    Join Date: Nov 2015

    Location: Wolverhampton

    Posts: 3,751
    I'm Oliver.

    Default

    Quote Originally Posted by RobbieGong View Post
    Lol, Well chuffed for you Oliver.
    If I ever went another route it would always have been just as you've done it, a properly overhauled sp10 Mk2 via The Mac.
    I'm too happly with my Techie to go there though.
    Yes, he's a very talented guy. You should know lol.

    Sent from my EVA-L09 using Tapatalk
    Technics SP10 MK2 > Phonomac AT-1010 tonearm > ZYX R50 Bloom cartridge > Jolida JD9 MKII > Firebottle Monoblocks > Creek OBH-11SE Headphone Amp > IXOS Speaker Cables > Pioneer CS-77A Speakers

  8. #8
    Join Date: Nov 2016

    Location: North East England

    Posts: 377
    I'm Mick.

    Default

    Will look amazing once done.
    Technics SL1210 MK2, Ortofon 2M Black Cart, Isonoe isolation feet and boots, Mike New main bearing, Mike New ETP Platter, Oyaide RCA Tone Arm and speaker cables, Jelco SA-750D Tonearm. Oyaide HS-TF Carbon headshell, Timestep HE III External PSU, High Fidelity Crystal glass turntable matt, Blue LED upgrade, Denon AVR-2808CI Amp, Bowers and Wilkins DM602S3 Speakers,
    Black Rhodium Jazz power cables for amp and turntable, Angle Audiophile Reference 2 Battery Phono Stage.

  9. #9
    Join Date: Nov 2015

    Location: Wolverhampton

    Posts: 3,751
    I'm Oliver.

    Default

    Quote Originally Posted by Dubster68 View Post
    Will look amazing once done.
    Fingers crossed!!!

    Sent from my EVA-L09 using Tapatalk
    Technics SP10 MK2 > Phonomac AT-1010 tonearm > ZYX R50 Bloom cartridge > Jolida JD9 MKII > Firebottle Monoblocks > Creek OBH-11SE Headphone Amp > IXOS Speaker Cables > Pioneer CS-77A Speakers

  10. #10
    Join Date: Jul 2012

    Location: Benson, Oxfordshire

    Posts: 450
    I'm Alex.

    Default

    Wow! That looks like it's going to be very nice indeed.

+ Reply to Thread
Page 1 of 20 12311 ... LastLast



 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •