Main system : VPI Scout 1.1 / JMW 9T / 2M Black / Croft 25R+ / Croft 7 / Heco Celan GT 702
Second System : Goldring Lenco GL75 / AT95EX / Pioneer SX590 / Spendor SP2
I understand where you are coming from Marco because I used passive preamps for years and was captured by their 'open window' approach when used in a system however there is always a nagging doubt that you are missing something at the expense of the very clean sonics and that became apparent as soon as I popped the Croft 25R into the system. Glorious rich full sound across the frequency spectrum was restored!
Main system : VPI Scout 1.1 / JMW 9T / 2M Black / Croft 25R+ / Croft 7 / Heco Celan GT 702
Second System : Goldring Lenco GL75 / AT95EX / Pioneer SX590 / Spendor SP2
Mana Acoustics Racks / Bright Star IsoNodes Decoupling >> Allo DigiOne Player >> Pedja Rogic's Audial Model S DAC + Pioneer PL-71 turntable / Vista Audio phono-1 mk II / Denon PCL-5 headshell / Reson Reca >> LFD DLS >> LFD PA2M (SE) >> Royd RR3s.
Arkless Electronics-Engineered to be better. Tel. 01670 530674 (after 1pm)
Modded Thorens TD150, Audio Technica AT-1005 MkII, Technics EPC-300MC, Arkless Hybrid MC phono stage, Arkless passive pre, Arkless 50WPC Class A SS power amp, (or) Arkless modded Leak Stereo 20, Modded Kef Reference 105/3's
ReVox PR99, Studer B62, Ferrograph Series 7, Tandberg TCD440, Hitachi FT-5500MkI, also FT-5500MkII
Digital: Yamaha CDR-HD1500 (Digital Swiss army knife-CD recorder, player, hard drive, DAC and ADC in one), PC files via 24/96 sound card and SPDIF, modded Philips CD850, modded Philips CD104, modded DPA Little Bit DAC. Sennheiser HD580 cans with Arkless Headphone amp.
Cables- free interconnects that come with CD players, mains leads from B&Q, dead kettles etc, extension leads from Tesco
What I was attempting to type is that in a shunt attenuator only ONE resistor is directly in the signal path, the 'shunt' resistors bleeding further signal away with each different volume step and doing what I said to the input and output impedances, which I suspect is irrelevant for most decent kit wired through them and certainly for the gear I'm most involved with these days. I maybe misread Marco when he said the shunt resistors were in the signal path and was responding to that comment.
Is that clearer now? Sorry, I've started posting again and don't know why - mumbles off into the far distance again...
Tear down these walls; Cut the ties that held me
Crying out at the top of my voice; Tell me now if you can hear me
Apart from the right amplification (whatever that may be) you can't beat large amounts of power and BIG speakers for impact, sadly both of which I am unable to accommodate in my listening room. However within the constraints of my room I can create some decent impact and a sense of scale especially with the right material.
Yes we must try and get a listening session sorted.
Main system : VPI Scout 1.1 / JMW 9T / 2M Black / Croft 25R+ / Croft 7 / Heco Celan GT 702
Second System : Goldring Lenco GL75 / AT95EX / Pioneer SX590 / Spendor SP2
Arkless Electronics-Engineered to be better. Tel. 01670 530674 (after 1pm)
Modded Thorens TD150, Audio Technica AT-1005 MkII, Technics EPC-300MC, Arkless Hybrid MC phono stage, Arkless passive pre, Arkless 50WPC Class A SS power amp, (or) Arkless modded Leak Stereo 20, Modded Kef Reference 105/3's
ReVox PR99, Studer B62, Ferrograph Series 7, Tandberg TCD440, Hitachi FT-5500MkI, also FT-5500MkII
Digital: Yamaha CDR-HD1500 (Digital Swiss army knife-CD recorder, player, hard drive, DAC and ADC in one), PC files via 24/96 sound card and SPDIF, modded Philips CD850, modded Philips CD104, modded DPA Little Bit DAC. Sennheiser HD580 cans with Arkless Headphone amp.
Cables- free interconnects that come with CD players, mains leads from B&Q, dead kettles etc, extension leads from Tesco
Agreed - but one needs some appreciation of the current flow in such devices. It is the voltage developed across the shunt resistor that causes current to flow, and that current is the signal.
Barry