First the TP703 is connect to chasis at all time of adjustment ? The Tp703 has me stuck


Then the left and right adjustments as per manual TP701/2


I checked checked for dry joints, re did earth wire from transformer, ran well, then went to fire it and it would click on again. Powers up fine, and can hear a sound in the speakers as it the relay is trying, so i am guessing the impendance needs adjusting.

? should TP703 be connected all the time during adjustment.

1. turn VR701 clockwise completely
2. connect TP703 to chasis and resistors to speaker terminals
3. Volume at 0
4. main speaker on
5. straight dc

6. Fire up

7 Adjust VR702 to -0.1V (DC)
8 Adjust VR701 to 0V (DC)

9. Power off

* fire back up, should be good to go with luck *