+ Reply to Thread
Results 1 to 4 of 4

Thread: Help needed

  1. #1
    Join Date: May 2016

    Location: north wales uk

    Posts: 44
    I'm peter.

    Default Help needed

    Hi i need a machine shop or a machinest that can turn a copy of a part for me i have the material , so if you have access to a lathe and can screw cut live near chester , deeside or north wales
    can you do this for me and what would be the cost , i will pay for this to be machined , i am not expecting it done for nothing , it can be sent in the post , the part is the top of a michell bearing it has a2 start thread a 3/8bsf and what looks like 1/2 inc unf , it is to be machined out of the material supplied, ,

    cheers peter
    Last edited by gwernaffield; 29-07-2017 at 17:32.

  2. #2
    Join Date: May 2016

    Location: north wales uk

    Posts: 44
    I'm peter.

    Default

    bump

  3. #3
    Join Date: Nov 2015

    Location: Wolverhampton

    Posts: 2,701
    I'm Oliver.

    Default

    See speedy Steve of this forum.

    Sent from my EVA-L09 using Tapatalk
    Alphason HR100 MCS > Toshiba SR 370 Turntable > ZYX R50 Bloom cartridge > Firebottle OTP MK2 Phono Stage > Firebottle Monoblocks > Creek OBH-11SE Headphone Amp > IXOS Speaker Cables > Pioneer CS-77A Speakers

  4. #4
    Join Date: May 2016

    Location: north wales uk

    Posts: 44
    I'm peter.

    Default

    Cheers i will send him a message

+ Reply to Thread



 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •