This is what I used on the Tosh when I fitted the jelco SA 750db.
Worked very well.
http://www.ebay.co.uk/itm/1-Pcs-Prem...item419b192daa
Location: Manchester
Posts: 122
I'm Nick.
This is what I used on the Tosh when I fitted the jelco SA 750db.
Worked very well.
http://www.ebay.co.uk/itm/1-Pcs-Prem...item419b192daa
Go for an IKEDA rewire and silver tags if you can afford it. Having a 5 pin din plug is very good if you want to try new tonearm cables, otherwise you can foresake the 5 din plug (and another component in the signal path) and have a complete run of IKEDA silver into some yummy silver RCA plugs.
Alphasons seems to always need an additional collar making, speedy steve made mine.
SS
CD Teac VRDS25X(Audiotuned) DECK 1210 Mat Crystal Audio Mods MN Base/Bearing/Platter+Ebony armboard Feet Isonoe PSU Paul Hynes SR7EHD-27XL/DCSXL Ag DC lead/3 Stage Regs/Recap PCB+No Pitch/Strobe/Light ARM SME V(Kondo Ag Rewire&Tags) MC Cadenza Black FGS CABLES Arm Yannis SPD-4 IC Yannis 222 Litz+Ag bullets Power WAR PRE ATC SCA2 SPEAKERS ATC 50ASL STANDS Atacama PHONO Sugden Masterclass PA4 SUT Ortofon ST80SE POWER PSAudio P10
VALVE
PRE Croft Epoch(Modded) AMP Sondex S100 (Modded) SPEAKERS Tannoy 15"MG+RFC Warwick cabs+ Ref XO + Batpure supertweeters DECK Garrard 301 Mat Teunto Bearings 401(Bastin) Plinth Bamboo Arms 3009/3012 PSU Eagle+Tachometer MC Ag Meister II/FGS + Ortofon SPU MONO CABLES Arm Yannis 420.5 Litz+ SpeakerPC Tripple C+WBT-0681 Ag IC Oyaide FTVS-510 AgWBT 0110Ag Phonostages Paradise(4 Box Mega-Modded) / Croft Musicmaker
Any idea how to fix the arm lever as the arm drops way too quickly ?
Sent from my EVA-L09 using Tapatalk
another job for j7 i think olly
My System
John Wood KT88 Amp.
Paradise Phono Stage
Sony TTS-8000 Turntable.
PMAT-1010 MK6 Tonearm.
Ortofon Cadenza Bronze
Sony X555ES Cd Player
Yamaha NS1000m Speakers
Ah, pants. I'll see what the cable change reveals then I'll charter the path.
Sent from my EVA-L09 using Tapatalk
I think if your going to use J7's services you might as well go the "Whole Hog" and get what you can afford. The collar from Speedy Steve was originally made to the exact same specs as the Alphason original but I made my own collar from EVA to increase the Alphason's VTA range. I use my Alphason on a very heavily modded Lenco.
I had this problem on mine and he fixed it.
+1 don't bugger about just get him to fix it.
SS
CD Teac VRDS25X(Audiotuned) DECK 1210 Mat Crystal Audio Mods MN Base/Bearing/Platter+Ebony armboard Feet Isonoe PSU Paul Hynes SR7EHD-27XL/DCSXL Ag DC lead/3 Stage Regs/Recap PCB+No Pitch/Strobe/Light ARM SME V(Kondo Ag Rewire&Tags) MC Cadenza Black FGS CABLES Arm Yannis SPD-4 IC Yannis 222 Litz+Ag bullets Power WAR PRE ATC SCA2 SPEAKERS ATC 50ASL STANDS Atacama PHONO Sugden Masterclass PA4 SUT Ortofon ST80SE POWER PSAudio P10
VALVE
PRE Croft Epoch(Modded) AMP Sondex S100 (Modded) SPEAKERS Tannoy 15"MG+RFC Warwick cabs+ Ref XO + Batpure supertweeters DECK Garrard 301 Mat Teunto Bearings 401(Bastin) Plinth Bamboo Arms 3009/3012 PSU Eagle+Tachometer MC Ag Meister II/FGS + Ortofon SPU MONO CABLES Arm Yannis 420.5 Litz+ SpeakerPC Tripple C+WBT-0681 Ag IC Oyaide FTVS-510 AgWBT 0110Ag Phonostages Paradise(4 Box Mega-Modded) / Croft Musicmaker
Lol. Fair enough.
Sent from my EVA-L09 using Tapatalk
I'm sure you are far more capable than me Olly but when I put my sausage fingers near my SME I end up having to send it to J7 to sort out. Fiddly thing these arms......
Turntable
Toshiba SR-370/Mission 774/Van Damme cable with MS Starline plugs/Ortofon Quintet Black
CD
Cambridge CXC transport/modified Musical Fidelity X-DAC/modified Musical Fidelity X-10 V3 tube buffer
Network Player
Cambridge NP30
Amplifier
Denon HA-500 head amp/Nakamichi CA-5E pre-amp/Chinese passive RVC/Proton AA-1150 DMC power amp
Speakers
Mordaunt Short Signifer on original factory stands
Cables
Mogami with Rean Neutrik plugs/NVA LS5
Headphones
Sennheiser HD600/Sennheiser HD650/Koss Pro4 AA