Latest projects and products.

First up is a special sized and weighted for a SAEC arm. This one went to Sweden.

First unpolished


Then polished up





This next next one is a bespoke armplate slider in aluminium for Hugo of Ammonite Audio fame
This is for a Reed 3P tonearm and can be seen and heard at the North West Audio Show where the Kenwood/Reed3P combination will be showing off a Miyajima Shilabe stereo cartridge. More details here https://www.facebook.com/ammoniteaudio/

10mm billet aluminium plates, 80mm diameter









This next one is a headshell repair. The threads were a bit pulled so I milled them out and replaced them with steel threaded inserts.



Now for some Tannoy GRF replica cabs in premium birch ply, 21mm throughout. These are to my own design to be a bit taller and narrower to
be easier to accommodate into rooms. I design them to retain the original back loaded horn volumes, so they sound identical to the regular shaped GRF replica cabs I also build.
These are bound for Staffordshire UK. They can be palletized and shipped overseas by air within Europe, or sea to the rest of the world.
Here are some pics of the construction. More pics to follow as they are completed.





Finally an armpod bound for Canada. First requirement was for a deck that was of 9.5 cm plinth height + / - 1cm via the adjustable feet. This was added to in height for flexibility of deck use by means of a lower extension piece.
This is bolted into the top piece for perfect stability.
Both sections are 4" aluminium tube, lead filled and weight approx 7kgs. Very stable and solid.
A Reed tonearm will be fitted to the ebony armboard.