+ Reply to Thread
Results 1 to 2 of 2

Thread: Lots of new projects and products

  1. #1
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 933
    I'm Steve.

    Default Lots of new projects and products

    Latest projects and products.

    First up is a special sized and weighted for a SAEC arm. This one went to Sweden.

    First unpolished


    Then polished up





    This next next one is a bespoke armplate slider in aluminium for Hugo of Ammonite Audio fame
    This is for a Reed 3P tonearm and can be seen and heard at the North West Audio Show where the Kenwood/Reed3P combination will be showing off a Miyajima Shilabe stereo cartridge. More details here https://www.facebook.com/ammoniteaudio/

    10mm billet aluminium plates, 80mm diameter









    This next one is a headshell repair. The threads were a bit pulled so I milled them out and replaced them with steel threaded inserts.



    Now for some Tannoy GRF replica cabs in premium birch ply, 21mm throughout. These are to my own design to be a bit taller and narrower to
    be easier to accommodate into rooms. I design them to retain the original back loaded horn volumes, so they sound identical to the regular shaped GRF replica cabs I also build.
    These are bound for Staffordshire UK. They can be palletized and shipped overseas by air within Europe, or sea to the rest of the world.
    Here are some pics of the construction. More pics to follow as they are completed.





    Finally an armpod bound for Canada. First requirement was for a deck that was of 9.5 cm plinth height + / - 1cm via the adjustable feet. This was added to in height for flexibility of deck use by means of a lower extension piece.
    This is bolted into the top piece for perfect stability.
    Both sections are 4" aluminium tube, lead filled and weight approx 7kgs. Very stable and solid.
    A Reed tonearm will be fitted to the ebony armboard.

    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Digital CD spinner, Serious USB->I2S streaming, ADC / DSP XO / Pre / 4 DAC's : WAF Najda, Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of counterweights, tonearm boards, Tannoy GRF style speaker cabinets, horn speakers and more.
    For more information about my creations and products please click below
    http://fosworld.wix.com/magna-audio

  2. #2
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 933
    I'm Steve.

    Default

    Here's a pic of the base of the 2 stage armpod showing the long bolts that secure the 2 halves as one when in tall mode.



    Last edited by speedy.steve; 19-06-2017 at 16:03.
    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Digital CD spinner, Serious USB->I2S streaming, ADC / DSP XO / Pre / 4 DAC's : WAF Najda, Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of counterweights, tonearm boards, Tannoy GRF style speaker cabinets, horn speakers and more.
    For more information about my creations and products please click below
    http://fosworld.wix.com/magna-audio

+ Reply to Thread



 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •