+ Reply to Thread
Page 9 of 17 FirstFirst ... 7891011 ... LastLast
Results 81 to 90 of 161

Thread: Digital audio vs vinyl

  1. #81
    Join Date: May 2010

    Location: Vancouver, Canada

    Posts: 1,641
    I'm Alex.

    Default

    Quote Originally Posted by Arkless Electronics View Post
    In the interests of pedantry, suppression of hypocrisy, and exposure of double standards to the full public glare of the spotlight.... If I'd claimed the opposite was "bollocks" it wouldn't have been acceptable here on AOS... apparently... It would seem one can argue with a vehemence that requires use of terms such as "bollocks", "a load of nonsense" or "only an idiot would make such claims" so long as one is singing from the same hymn book as "The Management"... but as soon as you are arguing against certain entrenched opinions, the use of such terms suddenly becomes "unacceptable", "playing the man not the ball" or "insulting to forum members".... Just saying
    Point taken. I shouldn't have used such strong language. If I had a time machine, I'd travel back in the past and change that word to 'arrogant'.
    Don't you just hate it when you cannot detect where the post ends and a signature line begins?

    Alex.

  2. #82
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 69,322
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Yes, Alex, slap yourself on the bum!

    I hear you Jez, and it's a fair point, but Alex only typed his 'objectionable remark' an hour and a half ago, and indeed whilst I was out. Therefore, having only got back in, I've just seen your post and his! If I'd seen it, before, I'd have sorted it.

    Do remember in future that both the mods and I have lives outside of AoS, and so that not everything posted on the forum will always be picked up on instantly

    Marco.
    "A man is a success if he gets up in the morning and gets to bed at night, and in between he does what he wants to do". - Milan Kundera.

    "Your validity or worth are not defined or determined by the views of others with their own superimposed agendas". - Pharos (on AoS)

    My system:

    Modified Technics SL-1210MK5G/Mike New high-precision bearing & baseplate/Mike New ETP platter/Bruil record weight/Nagaoka GL602 crystal T/T mat. Paul Hynes SR7EHD PSU (plus regulator modules)/DCSXL pure-silver DC lead. Ortofon RS-212D tonearm/'Speedy Steve' custom-made Ebony armboard. Yannis Tome 423.5 Phono Silver-Litz tonearm cable, with Furutech CF-DIN(R) and Eichmann silver Bullet Plugs. Cartridges: Denon DL-S1 in AT MG-10 headshell with AT-6106 Quattro Hybrid lead-wire. Denon DL-103C1 in '103U' headshell with AT-609 silver lead-wire. Vintage Denon DL-103AU in AT-Ti15ANV Titanium Headshell. Shure M55E in Denon PCL-300 headshell with 6N silver lead-wire. Shure original USA SC35C. Audiocom-modified Sony X-777ES/DAS-R1 transport/DAC. Raspberry Pi-3 Model B and IQaudio Pi-DAC+/Paul Hynes SR3DR-05 linear PSU/Williams Audio NAS linear PSU. Heavily-modified Croft Charisma-X preamp. Modified Goldpoint SA4M-47 passive preamp. Stereo Coffee LDR. Head-amp: Paul Hynes design/SR5 PSU. Also modified Lentek. Tube Distinctions 50W Class A P/P Copper amp with cryo-treated Tung Sol KT150s. Speakers: 'Lockwood Majors', using 15" Tannoy Monitor Golds, modified with bespoke crossovers. Also Celestion Ditton 15XRs. Stands: Mana Acoustics (non-magnetic stainless steel 'clones’). Hi-Fi Racks Podium T/T wall shelf. Sony ST-5055L tuner. Cables: Furukawa EE/F-S 2mm & 2.6mm solid-core mains leads, fitted with Furutech FI-50 IECs and FI-1363Rs. Stereo interconnects: Sommer Carbokab 225 (with silver-plated MS Audio non-metallic POM RCAs). Speaker cable: VDH 'The Wind' Hybrid II. Digital coaxial cable: 1m Trompeter Electronics Triax TRC-75-2, with MS Audio ‘Starline' silver-plated RCAs. Mains block: Mark Grant 6-way, modded with Furutech FP-1363R sockets and Furukawa cable. Tube Distinctions digital noise filter. VPI HW 16.5 record cleaner.

  3. #83
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 69,322
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Quote Originally Posted by Yomanze View Post
    You aren't far from me, so possibly I could come round and we can compare my 'new school' TDA1541A DAC with your 'old school'. For me to approach my digital setup I would need a turntable like yours, or perhaps a maxed out Pink Triangle Anniversary, Townshend Rock etc. to beat this. Having said this my point is that top-class sound is far more expensive via the pure analogue route than vs. well-sorted digital i.e. I think £2k of proper digital will take over £10k of proper analogue to beat.
    I'd be WELL up for that, Neil, so we'll definitely do it. Just need to get our new kitchen finished first, as the hi-fi room is currently full of kitchen shite!

    Should be done before the end of June though, so we'll hook up then

    Marco.
    "A man is a success if he gets up in the morning and gets to bed at night, and in between he does what he wants to do". - Milan Kundera.

    "Your validity or worth are not defined or determined by the views of others with their own superimposed agendas". - Pharos (on AoS)

    My system:

    Modified Technics SL-1210MK5G/Mike New high-precision bearing & baseplate/Mike New ETP platter/Bruil record weight/Nagaoka GL602 crystal T/T mat. Paul Hynes SR7EHD PSU (plus regulator modules)/DCSXL pure-silver DC lead. Ortofon RS-212D tonearm/'Speedy Steve' custom-made Ebony armboard. Yannis Tome 423.5 Phono Silver-Litz tonearm cable, with Furutech CF-DIN(R) and Eichmann silver Bullet Plugs. Cartridges: Denon DL-S1 in AT MG-10 headshell with AT-6106 Quattro Hybrid lead-wire. Denon DL-103C1 in '103U' headshell with AT-609 silver lead-wire. Vintage Denon DL-103AU in AT-Ti15ANV Titanium Headshell. Shure M55E in Denon PCL-300 headshell with 6N silver lead-wire. Shure original USA SC35C. Audiocom-modified Sony X-777ES/DAS-R1 transport/DAC. Raspberry Pi-3 Model B and IQaudio Pi-DAC+/Paul Hynes SR3DR-05 linear PSU/Williams Audio NAS linear PSU. Heavily-modified Croft Charisma-X preamp. Modified Goldpoint SA4M-47 passive preamp. Stereo Coffee LDR. Head-amp: Paul Hynes design/SR5 PSU. Also modified Lentek. Tube Distinctions 50W Class A P/P Copper amp with cryo-treated Tung Sol KT150s. Speakers: 'Lockwood Majors', using 15" Tannoy Monitor Golds, modified with bespoke crossovers. Also Celestion Ditton 15XRs. Stands: Mana Acoustics (non-magnetic stainless steel 'clones’). Hi-Fi Racks Podium T/T wall shelf. Sony ST-5055L tuner. Cables: Furukawa EE/F-S 2mm & 2.6mm solid-core mains leads, fitted with Furutech FI-50 IECs and FI-1363Rs. Stereo interconnects: Sommer Carbokab 225 (with silver-plated MS Audio non-metallic POM RCAs). Speaker cable: VDH 'The Wind' Hybrid II. Digital coaxial cable: 1m Trompeter Electronics Triax TRC-75-2, with MS Audio ‘Starline' silver-plated RCAs. Mains block: Mark Grant 6-way, modded with Furutech FP-1363R sockets and Furukawa cable. Tube Distinctions digital noise filter. VPI HW 16.5 record cleaner.

  4. #84
    Join Date: Mar 2017

    Location: Seaford UK

    Posts: 189
    I'm Dennis.

    Default

    Arrogance seems to have two functions;

    To backfoot and disturb the recipients into a subservient disposition by intimidation, and/or

    To allow the arrogant person to believe unrealistically that he knows more, is superior, or has a much stronger position than he has in reality.

    In both people it is an imaginary status which is operating in the minds.

  5. #85
    Join Date: Sep 2013

    Location: North Island New Zealand

    Posts: 788
    I'm Chris.

    Default

    The cause of arrogance, or why it is displayed, is loneliness.

  6. #86
    Join Date: Apr 2015

    Location: Central Virginia

    Posts: 379
    I'm Russell.

    Default

    Quote Originally Posted by Light Dependant Resistor View Post
    The cause of arrogance, or why it is displayed, is loneliness.
    Or maybe they are lonely because they are arrogant?


    Sent from my iPad using Tapatalk

  7. #87
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 69,322
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Quote Originally Posted by Pharos View Post
    Arrogance seems to have two functions;

    To backfoot and disturb the recipients into a subservient disposition by intimidation, and/or

    To allow the arrogant person to believe unrealistically that he knows more, is superior, or has a much stronger position than he has in reality.

    In both people it is an imaginary status which is operating in the minds.
    What prompted those comments, Dennis? I don't see what relevance they have on this thread....

    Marco.
    "A man is a success if he gets up in the morning and gets to bed at night, and in between he does what he wants to do". - Milan Kundera.

    "Your validity or worth are not defined or determined by the views of others with their own superimposed agendas". - Pharos (on AoS)

    My system:

    Modified Technics SL-1210MK5G/Mike New high-precision bearing & baseplate/Mike New ETP platter/Bruil record weight/Nagaoka GL602 crystal T/T mat. Paul Hynes SR7EHD PSU (plus regulator modules)/DCSXL pure-silver DC lead. Ortofon RS-212D tonearm/'Speedy Steve' custom-made Ebony armboard. Yannis Tome 423.5 Phono Silver-Litz tonearm cable, with Furutech CF-DIN(R) and Eichmann silver Bullet Plugs. Cartridges: Denon DL-S1 in AT MG-10 headshell with AT-6106 Quattro Hybrid lead-wire. Denon DL-103C1 in '103U' headshell with AT-609 silver lead-wire. Vintage Denon DL-103AU in AT-Ti15ANV Titanium Headshell. Shure M55E in Denon PCL-300 headshell with 6N silver lead-wire. Shure original USA SC35C. Audiocom-modified Sony X-777ES/DAS-R1 transport/DAC. Raspberry Pi-3 Model B and IQaudio Pi-DAC+/Paul Hynes SR3DR-05 linear PSU/Williams Audio NAS linear PSU. Heavily-modified Croft Charisma-X preamp. Modified Goldpoint SA4M-47 passive preamp. Stereo Coffee LDR. Head-amp: Paul Hynes design/SR5 PSU. Also modified Lentek. Tube Distinctions 50W Class A P/P Copper amp with cryo-treated Tung Sol KT150s. Speakers: 'Lockwood Majors', using 15" Tannoy Monitor Golds, modified with bespoke crossovers. Also Celestion Ditton 15XRs. Stands: Mana Acoustics (non-magnetic stainless steel 'clones’). Hi-Fi Racks Podium T/T wall shelf. Sony ST-5055L tuner. Cables: Furukawa EE/F-S 2mm & 2.6mm solid-core mains leads, fitted with Furutech FI-50 IECs and FI-1363Rs. Stereo interconnects: Sommer Carbokab 225 (with silver-plated MS Audio non-metallic POM RCAs). Speaker cable: VDH 'The Wind' Hybrid II. Digital coaxial cable: 1m Trompeter Electronics Triax TRC-75-2, with MS Audio ‘Starline' silver-plated RCAs. Mains block: Mark Grant 6-way, modded with Furutech FP-1363R sockets and Furukawa cable. Tube Distinctions digital noise filter. VPI HW 16.5 record cleaner.

  8. #88
    Join Date: Aug 2009

    Location: Staffordshire, England

    Posts: 16,241
    I'm Martin.

    Default

    Post 81
    Martin



    Current Lash Up:

    Technics SL1200 with Sumiko h/s & Nagaoka MP50 * Firebottle valve MM phono stage * Parasound CDPi1000 * NVA P90SA passive pre / Krell KSA50S Power amp * JM Lab Electra 926 loudspeakers *



    "I hate to advocate drugs, alcohol, violence, or insanity to anyone, but they've always worked for me." - Hunter S Thompson

  9. #89
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 69,322
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Quote Originally Posted by brian2957 View Post
    Yup , James kindly took me over to hear the system you're describing Alan and I agree with everything you've said I this post
    Hi Brian,

    Could I just confirm which member owns the system you're referring to and where he lives?

    Marco.
    "A man is a success if he gets up in the morning and gets to bed at night, and in between he does what he wants to do". - Milan Kundera.

    "Your validity or worth are not defined or determined by the views of others with their own superimposed agendas". - Pharos (on AoS)

    My system:

    Modified Technics SL-1210MK5G/Mike New high-precision bearing & baseplate/Mike New ETP platter/Bruil record weight/Nagaoka GL602 crystal T/T mat. Paul Hynes SR7EHD PSU (plus regulator modules)/DCSXL pure-silver DC lead. Ortofon RS-212D tonearm/'Speedy Steve' custom-made Ebony armboard. Yannis Tome 423.5 Phono Silver-Litz tonearm cable, with Furutech CF-DIN(R) and Eichmann silver Bullet Plugs. Cartridges: Denon DL-S1 in AT MG-10 headshell with AT-6106 Quattro Hybrid lead-wire. Denon DL-103C1 in '103U' headshell with AT-609 silver lead-wire. Vintage Denon DL-103AU in AT-Ti15ANV Titanium Headshell. Shure M55E in Denon PCL-300 headshell with 6N silver lead-wire. Shure original USA SC35C. Audiocom-modified Sony X-777ES/DAS-R1 transport/DAC. Raspberry Pi-3 Model B and IQaudio Pi-DAC+/Paul Hynes SR3DR-05 linear PSU/Williams Audio NAS linear PSU. Heavily-modified Croft Charisma-X preamp. Modified Goldpoint SA4M-47 passive preamp. Stereo Coffee LDR. Head-amp: Paul Hynes design/SR5 PSU. Also modified Lentek. Tube Distinctions 50W Class A P/P Copper amp with cryo-treated Tung Sol KT150s. Speakers: 'Lockwood Majors', using 15" Tannoy Monitor Golds, modified with bespoke crossovers. Also Celestion Ditton 15XRs. Stands: Mana Acoustics (non-magnetic stainless steel 'clones’). Hi-Fi Racks Podium T/T wall shelf. Sony ST-5055L tuner. Cables: Furukawa EE/F-S 2mm & 2.6mm solid-core mains leads, fitted with Furutech FI-50 IECs and FI-1363Rs. Stereo interconnects: Sommer Carbokab 225 (with silver-plated MS Audio non-metallic POM RCAs). Speaker cable: VDH 'The Wind' Hybrid II. Digital coaxial cable: 1m Trompeter Electronics Triax TRC-75-2, with MS Audio ‘Starline' silver-plated RCAs. Mains block: Mark Grant 6-way, modded with Furutech FP-1363R sockets and Furukawa cable. Tube Distinctions digital noise filter. VPI HW 16.5 record cleaner.

  10. #90
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 69,322
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Quote Originally Posted by Macca View Post
    Post 81
    Ah yes, I see now. It was because Dennis' remark appeared immediately after my post (#83), that it seemed somewhat 'random'. I didn't realise it was in reference to something written two posts before it...

    What I always do in instances like that, is quote *exactly* what I'm referring to (from the post in question), then reply directly underneath that, which makes it absolutely clear what my post is in reference to

    Marco.
    "A man is a success if he gets up in the morning and gets to bed at night, and in between he does what he wants to do". - Milan Kundera.

    "Your validity or worth are not defined or determined by the views of others with their own superimposed agendas". - Pharos (on AoS)

    My system:

    Modified Technics SL-1210MK5G/Mike New high-precision bearing & baseplate/Mike New ETP platter/Bruil record weight/Nagaoka GL602 crystal T/T mat. Paul Hynes SR7EHD PSU (plus regulator modules)/DCSXL pure-silver DC lead. Ortofon RS-212D tonearm/'Speedy Steve' custom-made Ebony armboard. Yannis Tome 423.5 Phono Silver-Litz tonearm cable, with Furutech CF-DIN(R) and Eichmann silver Bullet Plugs. Cartridges: Denon DL-S1 in AT MG-10 headshell with AT-6106 Quattro Hybrid lead-wire. Denon DL-103C1 in '103U' headshell with AT-609 silver lead-wire. Vintage Denon DL-103AU in AT-Ti15ANV Titanium Headshell. Shure M55E in Denon PCL-300 headshell with 6N silver lead-wire. Shure original USA SC35C. Audiocom-modified Sony X-777ES/DAS-R1 transport/DAC. Raspberry Pi-3 Model B and IQaudio Pi-DAC+/Paul Hynes SR3DR-05 linear PSU/Williams Audio NAS linear PSU. Heavily-modified Croft Charisma-X preamp. Modified Goldpoint SA4M-47 passive preamp. Stereo Coffee LDR. Head-amp: Paul Hynes design/SR5 PSU. Also modified Lentek. Tube Distinctions 50W Class A P/P Copper amp with cryo-treated Tung Sol KT150s. Speakers: 'Lockwood Majors', using 15" Tannoy Monitor Golds, modified with bespoke crossovers. Also Celestion Ditton 15XRs. Stands: Mana Acoustics (non-magnetic stainless steel 'clones’). Hi-Fi Racks Podium T/T wall shelf. Sony ST-5055L tuner. Cables: Furukawa EE/F-S 2mm & 2.6mm solid-core mains leads, fitted with Furutech FI-50 IECs and FI-1363Rs. Stereo interconnects: Sommer Carbokab 225 (with silver-plated MS Audio non-metallic POM RCAs). Speaker cable: VDH 'The Wind' Hybrid II. Digital coaxial cable: 1m Trompeter Electronics Triax TRC-75-2, with MS Audio ‘Starline' silver-plated RCAs. Mains block: Mark Grant 6-way, modded with Furutech FP-1363R sockets and Furukawa cable. Tube Distinctions digital noise filter. VPI HW 16.5 record cleaner.

+ Reply to Thread
Page 9 of 17 FirstFirst ... 7891011 ... LastLast



 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •