+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Wanted: Garrard 401 motor unit

  1. #1
    Join Date: Feb 2010

    Location: Berkshire, UK

    Posts: 1,597
    I'm Tom.

    Default Wanted: Garrard 401 motor unit

    I feel another Garrard coming on .. to complement the Thorens and the Lenco and refresh my memory.

    I have a few plinth ideas and a useful high mass arm sitting idle ...

    Anyone got one kicking around idle? (if you pardon the pun). I don't mind if I need to take it along the M4 to Loricraft for a service.
    Speakers - 'RFC' Tannoy Canterburys with custom crossovers; Amp - Radford STA100; Preamp - EAR 912; Vinyl: Thorens TD124 MkII with Ikeda IT345-CR1 and Ortofon 309 Limited tonearms; Cartridges: Miyajima Kansui, Zero Mono and Premium 78, Ikeda 9TT, Ortofon SPU Royal N and SPU Mono GM MkII, and GE VX II vintage mono; phono stage and SUT from EAR 912; Esoteric Sound Re-Equalizer for early mono and 78; Digital: Audio Note CDT2/II transport and RPI2 with HifiBerry Digi+ board, heavily upgraded Audio Note Kit DAC.

    'Wer nicht liebt Wein, Weib und Gesang der ist ein Narr sein Leben lang.'

  2. #2
    Join Date: Mar 2008

    Location: Dunfermline, Scotland, UK

    Posts: 12,083
    I'm inthescottishmafia.

    Default

    Will PM you Tom.
    There are times when you canít do the sensible thing, when you canít act like a responsible adult at all; you just have to do whatever insane thing comes into your head. When bad people do it they end up murderers, when good people do it they end up heroes, and when the rest of us do it we end up looking like total idiots. But whenís that ever stopped us?

  3. #3
    Join Date: Mar 2012

    Location: Worcestershire

    Posts: 322
    I'm Paul.

    Default

    Might this be of interest?



  4. #4
    Join Date: Jul 2010

    Location: Cheltenham

    Posts: 644
    I'm Charlie.

    Default

    Ali,

    Have you decided to let go of the 401, which I sent you a few months ago?

    Best wishes,

    Charlie

  5. #5
    Join Date: Mar 2008

    Location: Dunfermline, Scotland, UK

    Posts: 12,083
    I'm inthescottishmafia.

    Default

    Hi Charlie,

    No definitely not! :-)

    I will be keeping that, the one I've offered to Tom is the unit I already had.

    The NOS one will be going to Loricraft for a full service.
    There are times when you canít do the sensible thing, when you canít act like a responsible adult at all; you just have to do whatever insane thing comes into your head. When bad people do it they end up murderers, when good people do it they end up heroes, and when the rest of us do it we end up looking like total idiots. But whenís that ever stopped us?

  6. #6
    Join Date: Oct 2014

    Location: Bracknell

    Posts: 42
    I'm Jack.

    Default

    I have a fully refurbished 401 with a new gun metal grey finish, Tom. The paint job was professionally done in N. Ireland. Martin did the strip down, clean and lubrication.
    You know where I am..haha..
    Jack NSM

  7. #7
    Join Date: Nov 2008

    Location: Belfast/Northern Ireland/UK

    Posts: 15,624
    I'm Neil.

    Default

    Quote Originally Posted by Non-Smoking Man View Post
    I have a fully refurbished 401 with a new gun metal grey finish, Tom. The paint job was professionally done in N. Ireland. Martin did the strip down, clean and lubrication.
    You know where I am..haha..
    Jack NSM
    Out of curiosity who in NI did it ?
    Regards Neil

  8. #8
    Join Date: Feb 2009

    Location: Nailsworth Glos

    Posts: 139

    Default

    I have a fully refurbished one for sale as well, with an unused since refurb bearing. All done by Dominic Harper at NWA and in excellent condition.
    Nick

    Technics SP10, DV 507 II, NWA DH1 Cart, 2012 Mac Mini running Roonserver - uRendu - Devialet 1000 PRO - Magico S5 - Finite Elemente Wall Shelf

  9. #9
    Join Date: Feb 2010

    Location: Berkshire, UK

    Posts: 1,597
    I'm Tom.

    Default

    Sorry guys I should have posted much earlier on this thread, but Ali and I agreed a deal quite early on. I'm now pondering the offer of a superb plinth from Monty which should get me up and running even quicker than I anticipated.
    Speakers - 'RFC' Tannoy Canterburys with custom crossovers; Amp - Radford STA100; Preamp - EAR 912; Vinyl: Thorens TD124 MkII with Ikeda IT345-CR1 and Ortofon 309 Limited tonearms; Cartridges: Miyajima Kansui, Zero Mono and Premium 78, Ikeda 9TT, Ortofon SPU Royal N and SPU Mono GM MkII, and GE VX II vintage mono; phono stage and SUT from EAR 912; Esoteric Sound Re-Equalizer for early mono and 78; Digital: Audio Note CDT2/II transport and RPI2 with HifiBerry Digi+ board, heavily upgraded Audio Note Kit DAC.

    'Wer nicht liebt Wein, Weib und Gesang der ist ein Narr sein Leben lang.'

  10. #10
    Join Date: Oct 2010

    Location: Devizes, Wiltshire.

    Posts: 1,016
    I'm Nigel.

    Default

    Quote Originally Posted by NickB View Post
    I have a fully refurbished one for sale as well, with an unused since refurb bearing. All done by Dominic Harper at NWA and in excellent condition.

    Very nice 401 this one, seen and heard it many times, could be tempted myself tbh.

    Nigel

+ Reply to Thread
Page 1 of 2 12 LastLast



 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •