+ Reply to Thread
Page 2 of 2 FirstFirst 12
Results 11 to 19 of 19

Thread: Why is my turntable making me happy?

  1. #11
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 70,027
    I'm AudioAl'sArbiterForPISHANTO.

    Default



    Contrary to popular belief, most DJs like a good sound, too!

    [Hence why the Technics was chosen and used by thousands of professionals worldwide, not just because of its ruggedness].

    Marco.
    "A man is a success if he gets up in the morning and gets to bed at night, and in between he does what he wants to do". - Milan Kundera.

    "Your validity or worth are not defined or determined by the views of others with their own superimposed agendas". - Pharos (on AoS)

    My system:

    Modified Technics SL-1210MK5G/Mike New high-precision bearing & baseplate/Mike New ETP platter/Bruil record weight/Nagaoka GL602 crystal T/T mat. Paul Hynes SR7EHD PSU (plus regulator modules)/DCSXL pure-silver DC lead. Ortofon RS-212D tonearm/'Speedy Steve' custom-made Ebony armboard. Yannis Tome 423.5 Phono Silver-Litz tonearm cable, with Furutech CF-DIN(R) and Eichmann silver Bullet Plugs. Cartridges: Denon DL-S1 in AT MG-10 headshell with AT-6106 Quattro Hybrid lead-wire. Denon DL-103C1 in '103U' headshell with AT-609 silver lead-wire. Vintage Denon DL-103AU in AT-Ti15ANV Titanium Headshell. Shure M55E in Denon PCL-300 headshell with 6N silver lead-wire. Shure original USA SC35C. Audiocom-modified Sony X-777ES/DAS-R1 transport/DAC. Raspberry Pi-3 Model B and IQaudio Pi-DAC+/Paul Hynes SR3DR-05 linear PSU/Williams Audio NAS linear PSU. Heavily-modified Croft Charisma-X preamp. Stereo Coffee LDR. Head-amp: Paul Hynes design/SR5 PSU. Also modified Lentek. Tube Distinctions 50W Class A P/P Copper amp with cryo-treated Tung Sol KT150s. Speakers: 'Lockwood Majors', using 15" Tannoy Monitor Golds, modified with bespoke crossovers. Also Celestion Ditton 15XRs. Stands: Mana Acoustics (non-magnetic stainless steel 'clones’). Hi-Fi Racks Podium T/T wall shelf. Sony ST-5055L tuner. Cables: Furukawa EE/F-S 2mm & 2.6mm solid-core mains leads, fitted with Furutech FI-50 IECs and FI-1363Rs. Stereo interconnects: Sommer Carbokab 225 (with silver-plated MS Audio non-metallic POM RCAs). Speaker cable: VDH 'The Wind' Hybrid II. Digital coaxial cable: 1m Trompeter Electronics Triax TRC-75-2, with MS Audio ‘Starline' silver-plated RCAs. Mains block: Mark Grant 6-way, modded with Furutech FP-1363R sockets and Furukawa cable. Tube Distinctions digital noise filter. VPI HW 16.5 record cleaner.

  2. #12
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 70,027
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Quote Originally Posted by Macca View Post
    I've got a lot of albums on both CD and vinyl and I have sometimes become confused as to whether I am listening to the CD or the vinyl version.
    I know *exactly* what you mean, as I'm the same.

    However, that's because my turntable shares the traits of a good CD player, as I described before, and most of the records I play are in pristine condition and squeaky-clean (having been meticulously run through an RCM), so as with CD, in terms of noise, there is virtual silence on playback.

    No clicks, no pops, no scratchy noises - just pure unadulterated musical pleasure!

    It's therefore sometimes VERY easy to momentarily forget if you're listening to vinyl or CD.

    Marco.
    "A man is a success if he gets up in the morning and gets to bed at night, and in between he does what he wants to do". - Milan Kundera.

    "Your validity or worth are not defined or determined by the views of others with their own superimposed agendas". - Pharos (on AoS)

    My system:

    Modified Technics SL-1210MK5G/Mike New high-precision bearing & baseplate/Mike New ETP platter/Bruil record weight/Nagaoka GL602 crystal T/T mat. Paul Hynes SR7EHD PSU (plus regulator modules)/DCSXL pure-silver DC lead. Ortofon RS-212D tonearm/'Speedy Steve' custom-made Ebony armboard. Yannis Tome 423.5 Phono Silver-Litz tonearm cable, with Furutech CF-DIN(R) and Eichmann silver Bullet Plugs. Cartridges: Denon DL-S1 in AT MG-10 headshell with AT-6106 Quattro Hybrid lead-wire. Denon DL-103C1 in '103U' headshell with AT-609 silver lead-wire. Vintage Denon DL-103AU in AT-Ti15ANV Titanium Headshell. Shure M55E in Denon PCL-300 headshell with 6N silver lead-wire. Shure original USA SC35C. Audiocom-modified Sony X-777ES/DAS-R1 transport/DAC. Raspberry Pi-3 Model B and IQaudio Pi-DAC+/Paul Hynes SR3DR-05 linear PSU/Williams Audio NAS linear PSU. Heavily-modified Croft Charisma-X preamp. Stereo Coffee LDR. Head-amp: Paul Hynes design/SR5 PSU. Also modified Lentek. Tube Distinctions 50W Class A P/P Copper amp with cryo-treated Tung Sol KT150s. Speakers: 'Lockwood Majors', using 15" Tannoy Monitor Golds, modified with bespoke crossovers. Also Celestion Ditton 15XRs. Stands: Mana Acoustics (non-magnetic stainless steel 'clones’). Hi-Fi Racks Podium T/T wall shelf. Sony ST-5055L tuner. Cables: Furukawa EE/F-S 2mm & 2.6mm solid-core mains leads, fitted with Furutech FI-50 IECs and FI-1363Rs. Stereo interconnects: Sommer Carbokab 225 (with silver-plated MS Audio non-metallic POM RCAs). Speaker cable: VDH 'The Wind' Hybrid II. Digital coaxial cable: 1m Trompeter Electronics Triax TRC-75-2, with MS Audio ‘Starline' silver-plated RCAs. Mains block: Mark Grant 6-way, modded with Furutech FP-1363R sockets and Furukawa cable. Tube Distinctions digital noise filter. VPI HW 16.5 record cleaner.

  3. #13
    Join Date: Jan 2013

    Location: Birmingham

    Posts: 2,897
    I'm James.

    Default

    Quote Originally Posted by Marco View Post


    Contrary to popular opinion, most DJs like a good sound, too!

    [Hence why the Technics was chosen by professionals, not just because of its ruggedness].

    Marco.
    Must be good if they are installing them at Abbey Road studios

    http://thevinylfactory.com/news/abbe...00-turntables/
    VPI Scout 1.1 / JMW 9T Tonearm / 2M Black /Croft 25R+ / Croft 7 / Spendor SP2

  4. #14
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 70,027
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Interesting, Jim....

    Marco.
    "A man is a success if he gets up in the morning and gets to bed at night, and in between he does what he wants to do". - Milan Kundera.

    "Your validity or worth are not defined or determined by the views of others with their own superimposed agendas". - Pharos (on AoS)

    My system:

    Modified Technics SL-1210MK5G/Mike New high-precision bearing & baseplate/Mike New ETP platter/Bruil record weight/Nagaoka GL602 crystal T/T mat. Paul Hynes SR7EHD PSU (plus regulator modules)/DCSXL pure-silver DC lead. Ortofon RS-212D tonearm/'Speedy Steve' custom-made Ebony armboard. Yannis Tome 423.5 Phono Silver-Litz tonearm cable, with Furutech CF-DIN(R) and Eichmann silver Bullet Plugs. Cartridges: Denon DL-S1 in AT MG-10 headshell with AT-6106 Quattro Hybrid lead-wire. Denon DL-103C1 in '103U' headshell with AT-609 silver lead-wire. Vintage Denon DL-103AU in AT-Ti15ANV Titanium Headshell. Shure M55E in Denon PCL-300 headshell with 6N silver lead-wire. Shure original USA SC35C. Audiocom-modified Sony X-777ES/DAS-R1 transport/DAC. Raspberry Pi-3 Model B and IQaudio Pi-DAC+/Paul Hynes SR3DR-05 linear PSU/Williams Audio NAS linear PSU. Heavily-modified Croft Charisma-X preamp. Stereo Coffee LDR. Head-amp: Paul Hynes design/SR5 PSU. Also modified Lentek. Tube Distinctions 50W Class A P/P Copper amp with cryo-treated Tung Sol KT150s. Speakers: 'Lockwood Majors', using 15" Tannoy Monitor Golds, modified with bespoke crossovers. Also Celestion Ditton 15XRs. Stands: Mana Acoustics (non-magnetic stainless steel 'clones’). Hi-Fi Racks Podium T/T wall shelf. Sony ST-5055L tuner. Cables: Furukawa EE/F-S 2mm & 2.6mm solid-core mains leads, fitted with Furutech FI-50 IECs and FI-1363Rs. Stereo interconnects: Sommer Carbokab 225 (with silver-plated MS Audio non-metallic POM RCAs). Speaker cable: VDH 'The Wind' Hybrid II. Digital coaxial cable: 1m Trompeter Electronics Triax TRC-75-2, with MS Audio ‘Starline' silver-plated RCAs. Mains block: Mark Grant 6-way, modded with Furutech FP-1363R sockets and Furukawa cable. Tube Distinctions digital noise filter. VPI HW 16.5 record cleaner.

  5. #15
    Join Date: Jan 2013

    Location: Birmingham

    Posts: 2,897
    I'm James.

    Default

    Quote Originally Posted by Marco View Post
    Interesting, Jim....

    Marco.
    This was an interesting review Marco. Compares the new cheaper Technics SL1200 against the original.

    http://www.tonepublications.com/anal...00g-turntable/
    VPI Scout 1.1 / JMW 9T Tonearm / 2M Black /Croft 25R+ / Croft 7 / Spendor SP2

  6. #16
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 70,027
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Cheers, mate. I'll give that a read

    Marco.
    "A man is a success if he gets up in the morning and gets to bed at night, and in between he does what he wants to do". - Milan Kundera.

    "Your validity or worth are not defined or determined by the views of others with their own superimposed agendas". - Pharos (on AoS)

    My system:

    Modified Technics SL-1210MK5G/Mike New high-precision bearing & baseplate/Mike New ETP platter/Bruil record weight/Nagaoka GL602 crystal T/T mat. Paul Hynes SR7EHD PSU (plus regulator modules)/DCSXL pure-silver DC lead. Ortofon RS-212D tonearm/'Speedy Steve' custom-made Ebony armboard. Yannis Tome 423.5 Phono Silver-Litz tonearm cable, with Furutech CF-DIN(R) and Eichmann silver Bullet Plugs. Cartridges: Denon DL-S1 in AT MG-10 headshell with AT-6106 Quattro Hybrid lead-wire. Denon DL-103C1 in '103U' headshell with AT-609 silver lead-wire. Vintage Denon DL-103AU in AT-Ti15ANV Titanium Headshell. Shure M55E in Denon PCL-300 headshell with 6N silver lead-wire. Shure original USA SC35C. Audiocom-modified Sony X-777ES/DAS-R1 transport/DAC. Raspberry Pi-3 Model B and IQaudio Pi-DAC+/Paul Hynes SR3DR-05 linear PSU/Williams Audio NAS linear PSU. Heavily-modified Croft Charisma-X preamp. Stereo Coffee LDR. Head-amp: Paul Hynes design/SR5 PSU. Also modified Lentek. Tube Distinctions 50W Class A P/P Copper amp with cryo-treated Tung Sol KT150s. Speakers: 'Lockwood Majors', using 15" Tannoy Monitor Golds, modified with bespoke crossovers. Also Celestion Ditton 15XRs. Stands: Mana Acoustics (non-magnetic stainless steel 'clones’). Hi-Fi Racks Podium T/T wall shelf. Sony ST-5055L tuner. Cables: Furukawa EE/F-S 2mm & 2.6mm solid-core mains leads, fitted with Furutech FI-50 IECs and FI-1363Rs. Stereo interconnects: Sommer Carbokab 225 (with silver-plated MS Audio non-metallic POM RCAs). Speaker cable: VDH 'The Wind' Hybrid II. Digital coaxial cable: 1m Trompeter Electronics Triax TRC-75-2, with MS Audio ‘Starline' silver-plated RCAs. Mains block: Mark Grant 6-way, modded with Furutech FP-1363R sockets and Furukawa cable. Tube Distinctions digital noise filter. VPI HW 16.5 record cleaner.

  7. #17
    Join Date: Apr 2011

    Location: London

    Posts: 2,535
    I'm Robert.

    Default

    An interesting read.

  8. #18
    Join Date: Nov 2016

    Location: UK London

    Posts: 131
    I'm Chris.

    Default

    Analogue is what your ears prefer, it has something to do with speed of delivery, analogue delivers the sound slower than digital therefore your
    ears pick out out more of the sound. Its all there in the digital version but because the sound is delivered faster your ears miss it.

    Have a read through this thread - http://theartofsound.net/forum/showt...dings-on-vinyl
    Turntable : Project 2 Xperience Tone Arm & Cartridge : Project 9c Ortofon 2M Blue Phono Stage : Arkless 640P Digital Source :Primare CD21 Integrated Amp : Primare I30 Speakers : ProAc 110 Headphones : Beyerdynamic DT770 Pro

    Revox A77 MK IV 2 track 15 & 7 1/2 IPS
    TEAC A-3300SX 4 track 7 1/2 & 3 3/4 IPS
    Akai 4000DS MkII

  9. #19
    Join Date: Nov 2008

    Location: Rossendale

    Posts: 7,779
    I'm AMusicFanNotAnAudiophile.

    Default

    Quote Originally Posted by Cas View Post
    Analogue is what your ears prefer, it has something to do with speed of delivery, analogue delivers the sound slower than digital therefore your
    ears pick out out more of the sound. Its all there in the digital version but because the sound is delivered faster your ears miss it.

    Have a read through this thread - http://theartofsound.net/forum/showt...dings-on-vinyl
    That's novel, posting a link to another thread started by the OP.
    Chris

+ Reply to Thread
Page 2 of 2 FirstFirst 12



 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •