+ Reply to Thread
Results 1 to 5 of 5

Thread: Jelco arm lowering issue

  1. #1
    Join Date: Feb 2011

    Location: Liverpool, Merseyside.

    Posts: 718
    I'm Ben.

    Default Jelco arm lowering issue

    I'm wondering if anyone can offer some advice on how to sort a problem I have with my jelco sa750 please.

    I've noticed that when lowering the arm seems to gently drop as normal but just before the needle touches the record the arm moves inward towards the centre of the record by a few mm before touch down. This makes cueing up difficult and annoying!

    This seems to have only happened recently but I've no idea how or why. Can anyone advise what might be causing it please?

    Cheers

    Ben

    Sent from my CUBOT CHEETAH 2 using Tapatalk
    SL1210 (with ianmac bearing & isonoe feet)
    Jelco SA-750 & AT150 MLX,
    Firebottle plus phono stage,
    Jungson JA-88 amp,
    IPL STL TL Speakers.
    M2tech Young dac & dedicated PS for Tidal Hifi .
    Mark Grant connections and TQ blue speaker cables.

  2. #2
    Join Date: Jan 2017

    Location: Bucks

    Posts: 76
    I'm Milo.

    Default

    Its not happening to mine, or not enough to notice. I'll check again when I next cue one up.

    You've not adjusted the table at all and perhaps it isn't totally level?

  3. #3
    Join Date: Feb 2011

    Location: Liverpool, Merseyside.

    Posts: 718
    I'm Ben.

    Default

    Your right I've just checked the deck and it was a little low on the back left foot. Think that's sorted it, thanks!

    Sent from my CUBOT CHEETAH 2 using Tapatalk
    SL1210 (with ianmac bearing & isonoe feet)
    Jelco SA-750 & AT150 MLX,
    Firebottle plus phono stage,
    Jungson JA-88 amp,
    IPL STL TL Speakers.
    M2tech Young dac & dedicated PS for Tidal Hifi .
    Mark Grant connections and TQ blue speaker cables.

  4. #4
    Join Date: Jan 2017

    Location: Bucks

    Posts: 76
    I'm Milo.

    Default

    Winner.

  5. #5
    Join Date: Nov 2016

    Location: North East England

    Posts: 221
    I'm Mick.

    Default

    Easy fix
    Technics SL1210 MK2, Ortofon 2M Black Cart, Isonoe isolation feet and boots, Mike New main bearing, Mike New ETP Platter, Oyaide RCA Tone Arm and speaker cables, Jelco SA-750D Tonearm. Oyaide HS-TF Carbon headshell, Timestep HE III External PSU, High Fidelity Crystal glass turntable matt, Blue LED upgrade, Denon AVR-2808CI Amp, Bowers and Wilkins DM602S3 Speakers,
    Black Rhodium Jazz power cables for amp and turntable, Angle Audiophile Reference 2 Battery Phono Stage.

+ Reply to Thread



 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •