I think the Olsun mains blocks are very good industrial quality very good heavy duty sockets
They are not that expensive and come up on ebay cheap
http://www.olson.co.uk/13amp_slim.htm
http://www.ebay.co.uk/itm/Olson-10-W...-/292009072979
Alan
Turntable - Garrard 401/Jelco 750L/Ortofon Kontrapunkt B, Pioneer PLC 590, Micro Sieki MA505 , Denon DL103R - DIY Paradise Phono stage - Reel 2 Reel Studer A810, Otari MX55,Tascam BR20, Revox A77, B77, PR99, TEAC X1000 & 3440, Digital HTPC / Young Dac - Preamp - DIY B4, 821, Power Amp's DIY Avondale NCC300 Mono Block, Speakers Wilmslow Kit Volt BM220.8 / Scanspeak D2905/9500
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!
Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!
You're welcome, mate. Good to have chatted at last
Keep me posted of developments!
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!
Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!
4mm? What kind of plugs you using to accommodate that James?
4mm seems a bit of overkill (36amp). A 30amp ring main only uses 2.5mm cable and even a 1.5mm single lead is good for 19.5amps. Measured my system today and the whole thing draws less than 1 amp when used under normal/reasonably loud listening and doesn't spike much higher on sequenced start up. That's with a 7 channel power amp, active crossover, the TT and its air pump, Phono stage, Pre amp, Dac, and CD Transport.
I normally use a 2.5mm(27amp) extension to the distribution block and 1.5mm for each lead to the gear. Even that is more than what's needed. If you buy ready made IEC power leads, they are 1mm wire(15amp) as the IEC connectors are only rated at 10amps max and the three pin UK safety plug is rated at 13amp so its "adequate".
These are ratings for electrical safety and points at which things start to get warm. I have often wondered if extra copper has audible benefits and is the reason for me beefing up a bit, but I have never seen anything stating this as a fact.
Is it worth getting a decent mains block if the rest of your leads are OE? I recent ly bought an audio friendly Mains block ,mainly because the cheap ones I had I felt were so cheap ,were they safe? Any hoo this audio friendly job weren't too pricey 30 sovs and seems good quality,hard to say as yet if it improves anything. Also,am I right that the thinking is, best to plug your amp into wall socket and everything else into block? Jim
novafidelity x40 music server/pre/dac, Arcam A39, roksan k3 power amp,Monitor Audio Monitor 50, Dali spektor 1, van damme interconnects and speaker cable, roskan k3 CD player
Hi Ken, something like this with normal MK plug and furutech connector.
http://www.mains-cables-r-us.co.uk/d...per-metre.html
Main system : VPI Scout 1.1 / JMW 9T / 2M Black / Croft 25R+ / Croft 7 / Heco Celan GT 702
Second System : Goldring Lenco GL75 / AT95EX / Pioneer SX590 / Spendor SP2
Main system : VPI Scout 1.1 / JMW 9T / 2M Black / Croft 25R+ / Croft 7 / Heco Celan GT 702
Second System : Goldring Lenco GL75 / AT95EX / Pioneer SX590 / Spendor SP2