Devialet Expert Le 200 Stereo
The audiophile's benchmark. A superior phono stage for complex configurations. Additional connections. More power. May be chained to a second 200 to create a Dual Mono 400.
The best Stereo, the first step towards the Dual Mono.
2x200 Watts 6Ω
THD+noise 0.001%
Signal-to-noise ratio: 130 dB
Advanced phono stage
Devialet Expert
Devialet Expert
Devialet Expert Omnidirectional radio remote control
Expert Le 200 - complete technical specifications -
•Packaging contents:
◾1 Devialet Expert – Le 200 1 Expert Remote (3 AAA LR03 1.5V batteries)
◾1 power cable – adapted to the country
◾1 SD card for downloading configurations via the Configurator
◾User's manual for Devialet Expert – Le 200
◾1 warranty booklet (5 years)
◾1 microfiber cloth
◾1 pair of gloves for handling
•Chassis carved out of a single aluminium block:
◾Black chrome finish
◾Dimensions: 383mm x 383mm x 40mm (l, w, h)
◾Weight: 5.9 kg
◾Sliding removable connector cover
◾Horizontal or vertical installation with automatic tilt detection
•Electrical power supply:
◾Universal 80-265Vac – 50/60Hz
◾Power cable provided adapted to the country
◾Patented single stage switching mode topology
◾High power level: 600W continuous, 3000W peak
◾High output with power factor correction (PFC)
◾High resiliency to hazards potentially encountered on distribution networks : brownouts, quick transients, overloads
•Inputs / outputs:
◾2.4GHz 802.11 b/g/n Wi-Fi input for the Devialet AIR universal streamer ◦Formats supported: 16-bit/44.1 kHz PCM to 24-bit/192 kHz PCM
◾RJ45 10/100 Mbps Ethernet input for the Devialet AIR universal streamer ◦Formats supported: 16-bit/44.1 kHz PCM to 24-bit/192 kHz PCM
◾USB Audio 2.0 asynchronous input/output ◦Formats supported: ◾16-bit/44.1 kHz PCM to 32-bit/192 kHz PCM ◾DSD64 1bit/2.822400MHz and 1bit/3.072000MHz
◾Special characteristics: ◾Very low latency ◾Bi-directionality for digitisation of the active source
•S/PDIF TOSLINK optical connector: Formats supported:
◾16-bit/44.1 kHz PCM to 24-bit/192 kHz PCM
•3.5mm mini-jack S/PDIF optical + RS232 connector:
◾Formats supported:
◾PCM 16bits/44.1kHz jusqu'à 24bits/96kHz
◾Device control via the bidirectional RS232 protocol up to 115200 bauds (documentation available via the configurator)
•RCA 1 & RCA 2 connector (selected via the configurator):
◾1 or 2 coaxial S/PDIF digital inputs
◾Formats supported:
◾16-bit/44.1 kHz PCM to 24-bit/192 kHz PCM
◾DSD64 1bit/2.822400MHz and 1bit/3.072000MHz
◾1 S/PDIF coaxial (RCA1) digital output
◾Formats supported: PCM 24bits/48kHz/96kHz/192kHz
◾Multi-room use and monitoring loop
•Pre-amplified analogue output:
◾Set or variable volume ◾Output level up to 4 Vrms
◾Stereo/mono/left/right mixing ◾Available active filtering
◾WM8740 D/A convertor operating at 24 bits/192 kHz
◾Compatible with subwoofer, headphone amplifier, monitoring loop
◾May be activated / deactivated via remote control
•RCA 3 & RCA 4 connectors (selected via the configurator):
◾Line-in stereo analogue input
◾24-bit/96 kHz or 24-bit/192 kHz sampling
◾T.I. PCM4202 A/D convertor
◾Accepts voltages up to +/- 10V
◾Maximum recommended level: 4 Vrms
•Phono level stereo analogue input:
◾24-bit/96 kHz or 24-bit/192 kHz sampling
◾T.I. PCM4202 A/D convertor
◾Accepts voltages up to +/- 100mV
◾Maximum recommended level: 15mVrms
◾Advanced conversion stage
•1 or 2 coaxial S/PDIF digital inputs (Formats supported):
◾16-bit/44.1 kHz PCM to 24-bit/192 kHz PCM
◾DSD64 1bit/2.822400MHz and 1bit/3.072000MHz
•3.5mm mini-jack trigger connector
•Speaker output:
◾Patented ADH® (Analog Digital Hybrid) hybrid amplification core
◾4 mm banana plugs or fork connectors
◾Maximum power of 2 x 200 Wrms under 6Ω
◾Adjustable from 30 Wrms to 200 Wrms via the configurator
◾Compatible with all speakers, from 2Ω to 16Ω
◾Short-circuit protection
◾Available active filtering
◾THD+N (harmonic distortion) at full power: 0.001%
◾SMTPE IMD (intermodulation distortion): 0.001%
◾SNR (signal-to-noise ratio): 130dB (unweighted)
◾Thermal distortion: below measurement threshold
◾Output impedance: 0.001Ω
◾Passband: DC–87kHz (-3dB), DC–60kHz (-1dB), DC–30kHz (-0.1dB)
•Phono stage:
◾Cells supported: MM/MC
◾MM sensitivity of 1mVRMS at 15mVRMS
◾MC sensitivity of 100 μVRMS at 5000 μVRMS
◾256 combinations for the resistive/capacitive charge of the cells
◾Stereo/mono/left/right mixing
◾13 equalisation curves available
◾Specific menu for dynamic adjustment of all these settiings
•Preamplifier & main digital/analogue convertor:
◾Patented Magic Wire Digital / Analogue Converter, D/A T.I. PCM1792
◾Unique high-precision MasterClock with very low jitter: 2ps rms
◾Conversion of all inputs into 24-bit/192 kHz
◾Built-in DSD / PCM conversion
◾SAM profile via configurator
◾Available active filtering on all analogue outputs via configurator
◾Volume control in increments of 0.5 dB
◾Volume adjustment range: -97.5 dB to +30.0 dB
◾Bypass/pass-thru mode available input by input
◾Balance adjustment
◾Tone control: bass +/-18 dB, treble +/-18 dB with variable frequency cut-off via configurator
•On-board intelligence:
◾SD card connector for software updates and configurations
◾3 SHARC DSPs (400 MHz)
◾1 x 16 MHz RISC processor
◾4 x 40 MHz RISC processors
◾1 x 64 MHz RISC processor
•Omnidirectional radio remote control:
◾Chassis carved out of a single aluminium block
◾Black chrome finish
◾Dimensions: 114 mm x 114 mm x 34 mm (l, w, h)
◾Weight: ? Kg
◾Requires 3 AAA batteries (1.5V LR03), provided – service life of a set of batteries: 2 years
◾No peering required
◾Ultra responsive, latency < 3ms
***** Musicraft - Clearance + Special Offers List http://theartofsound.net/forum/showt...Special-Offers *****
***** https://www.facebook.com/MusicraftUK *****
***** Musicraft website - Special Offers list http://www.musicraft.co.uk/special-offers/ *****
Thanks
Rick @ Musicraft
Musicraft is Derby's foremost dealer for the finest, specialist Hi-Fi, Home Cinema & Multimedia components/systems. So, if you would like to know more about how our products can enrich your life, then please visit us or contact Rick.