+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: New radial- is it worth it?

  1. #1
    Join Date: Jan 2013

    Location: Birmingham

    Posts: 6,772
    I'm James.

    Default New radial- is it worth it?

    Thinking of putting in a radial from the fuse box to my hifi but is this really going to give me a cleaner supply than the ring main when all electrics go back and through the same fuse box?
    Main system : VPI Scout 1.1 / JMW 9T / 2M Black / Croft 25R+ / Croft 7 / Heco Celan GT 702

    Second System : Goldring Lenco GL75 / AT95EX / Pioneer SX590 / Spendor SP2

  2. #2
    Join Date: Oct 2012

    Location: The Black Country

    Posts: 6,089
    I'm Alan.

    Default

    Sorry I was out earlier.

    I imagine from knowing your set-up that when you are listening to the stereo there is very little else that is powered up in the house.

    Now that you have gained the extra transparency from the change to monoblocks I doubt very much that you will benefit from installing a radial.

  3. #3
    Join Date: Mar 2008

    Location: Galashiels

    Posts: 13,669
    I'm inthescottishmafia.

    Default

    Could try a balanced transformer instead?
    “Music has always been a matter of energy to me, a question of fuel. Sentimental people call it inspiration, but what they really mean is fuel. I have always needed fuel. I am a serious consumer. On some nights I still believe that a car with the gas needle on empty can run about fifty more miles if you have the right music very loud on the radio”

    Hunter S Thompson

  4. #4
    Join Date: Jan 2009

    Location: Essex

    Posts: 31,853
    I'm openingabottleofwine.

    Default

    It certainly wouldn't do any harm. When I redecorated my living/listening room I had a dedicated ring main installed, consisting of ten double sockets fed from a separate RCB/MCB at the meter. I did this as I dislike having cables running around the room, even if tucked close to the skirting board. Since I use electrostatic speakers which need to be powered, as well as monoblock power amps located immediately behind the speakers, the extra sockets were needed.

    Has it made any difference to the SQ? Not in my opinion, but the neatness of the cabling for my audio system gives me peace of mind.
    Barry

  5. #5
    Join Date: Jan 2013

    Location: Birmingham

    Posts: 6,772
    I'm James.

    Default

    Thanks chaps, may have saved me a lot of time and money! Might just put some more sockets in and be done with it.

    BMT does sound a interesting prospect and would certainly cure the buzzing in my Croft transformers!?
    Main system : VPI Scout 1.1 / JMW 9T / 2M Black / Croft 25R+ / Croft 7 / Heco Celan GT 702

    Second System : Goldring Lenco GL75 / AT95EX / Pioneer SX590 / Spendor SP2

  6. #6
    Join Date: Nov 2008

    Location: Banbury, Oxfordshire/Panteg is where my late father was born

    Posts: 4,382
    I'm Chris.

    Default

    I had a radial circuit installed for my downstairs AV system, mainly for convenience of connecting up, but was curious if it made a difference? Thought it maybe sounded a little better but what did make a difference was checking and tightening up every connection in every socket in my house, especially the earth, painstaking process but worthwhile for safety reasons also.
    Chris

    We've gone on holiday by mistake !

  7. #7
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,012
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Hi Chris,

    Good to see you back. Hope you're keeping well and your system is sounding good!

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.


    Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!

    Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!


  8. #8
    Join Date: Nov 2008

    Location: Banbury, Oxfordshire/Panteg is where my late father was born

    Posts: 4,382
    I'm Chris.

    Default

    Quote Originally Posted by Marco View Post
    Hi Chris,

    Good to see you back. Hope you're keeping well and your system is sounding good!

    Marco.
    Thanks Marco , not too bad, my system is almost there but I think a change of cartridge will do it.
    Chris

    We've gone on holiday by mistake !

  9. #9
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,012
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Nice one. Hope it works out, and if I can give any help or advice let me know

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.


    Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!

    Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!


  10. #10
    Join Date: Nov 2008

    Location: Banbury, Oxfordshire/Panteg is where my late father was born

    Posts: 4,382
    I'm Chris.

    Default

    Quote Originally Posted by Marco View Post
    Nice one. Hope it works out, and if I can give any help or advice let me know

    Marco.
    Thanks, yes perhaps look at old threads about cartridges.
    Chris

    We've gone on holiday by mistake !

+ Reply to Thread
Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •