did you sell this amp?
Location: SE corner of UK
Posts: 90
I'm chris.
did you sell this amp?
Location: Llanerfyl, Mid Wales
Posts: 169
I'm Nigel.
No Chris, it's still with me.
PM me if you are interested.
Location: SE corner of UK
Posts: 90
I'm chris.
cant immediately see how I pm you...
Am I right in thinking I will need a pre amp for a mc (turntable) input?
Are each inputs adjusted for gain independently?
Or is the gain of the amp as a whole adjusted, all three inputs have to be set the same?
Location: Llanerfyl, Mid Wales
Posts: 169
I'm Nigel.
you would need a phono stage to use a t/table and one with a m/c input.This would then connect to any one of the inputs on the Bantam One.
The three inputs have the same gain.
Location: Bourgogne, France
Posts: 6
I'm Francois.
Hi, is it still available ?
PM sent
François
Location: Llanerfyl, Mid Wales
Posts: 169
I'm Nigel.
Five posts are required before PM privileges are available.
Location: Bourgogne, France
Posts: 6
I'm Francois.
Nigel, Apparently I can't send you a PM since I just registered. May be you can send one to me.b
François
Location: Bourgogne, France
Posts: 6
I'm Francois.
Would you be willing to send the amp to France ?
Francois. If you make one more post, you should be able to use the PM facility.