+ Reply to Thread
Page 1 of 6 123 ... LastLast
Results 1 to 10 of 52

Thread: New Valves for phono stage

  1. #1
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 70,747
    I'm AudioAl'sArbiterForPISHANTO.

    Thumbs up New Valves for phono stage

    Just bought a nice matched pair of NOS Raytheon VT-229s, from 1945, for the phono stage in the Croft:








    Not bad for $115, as these are an early vintage, and top quality...

    Just need to wait on them now arriving from the States!

    Marco.
    "A man is a success if he gets up in the morning and gets to bed at night, and in between he does what he wants to do". - Milan Kundera.

    "Your validity or worth are not defined or determined by the views of others with their own superimposed agendas". - Pharos (on AoS)

    My system:

    Modified Technics SL-1210MK5G/Mike New high-precision bearing & baseplate/Mike New ETP platter/Bruil record weight/Nagaoka GL602 crystal T/T mat. Paul Hynes SR7EHD PSU (plus regulator modules)/DCSXL pure-silver DC lead. Ortofon RS-212D tonearm/'Speedy Steve' custom-made Ebony armboard. Yannis Tome 423.5 Phono Silver-Litz tonearm cable, with Furutech CF-DIN(R) and Eichmann silver Bullet Plugs. Cartridges: Denon DL-S1 in AT MG-10 headshell with AT-6106 Quattro Hybrid lead-wire. Denon DL-103C1 in '103U' headshell with AT-609 silver lead-wire. Vintage Denon DL-103AU in AT-Ti15ANV Titanium Headshell. Shure M55E in Denon PCL-300 headshell with 6N silver lead-wire. Shure original USA SC35C. Audiocom-modified Sony X-777ES/DAS-R1 transport/DAC. Raspberry Pi-3 Model B and IQaudio Pi-DAC+/Paul Hynes SR3DR-05 linear PSU/Williams Audio NAS linear PSU. Heavily-modified Croft Charisma-X preamp. Stereo Coffee LDR. Head-amp: Paul Hynes design/SR5 PSU. Also modified Lentek. Tube Distinctions 50W Class A P/P Copper amp with cryo-treated Tung Sol KT150s. Speakers: 'Lockwood Majors', using 15" Tannoy Monitor Golds, modified with bespoke crossovers. Also Celestion Ditton 15XRs. Stands: Mana Acoustics (non-magnetic stainless steel 'clones’). Hi-Fi Racks Podium T/T wall shelf. Sony ST-5055L tuner. Cables: Furukawa EE/F-S 2mm & 2.6mm solid-core mains leads, fitted with Furutech FI-50 IECs and FI-1363Rs. Stereo interconnects: Sommer Carbokab 225 (with silver-plated MS Audio non-metallic POM RCAs). Speaker cable: VDH 'The Wind' Hybrid II. Digital coaxial cable: 1m Trompeter Electronics Triax TRC-75-2, with MS Audio ‘Starline' silver-plated RCAs. Mains block: Mark Grant 6-way, modded with Furutech FP-1363R sockets and Furukawa cable. Tube Distinctions digital noise filter. VPI HW 16.5 record cleaner.

  2. #2
    Join Date: Feb 2013

    Location: W Lothian

    Posts: 34,597
    I'm Grant.

    Default

    they look nice ..good price too.
    Regards,
    Grant ....
    Sometimes incompetence is useful. It helps you keep an open mind.
    .... ..... ...... ...... ................... ..... ..... ..... ..... .....
    IMUTO TAURUS X4 BATTERY SUPPLY. - RPI2B & AUDIOPHONICS DAC running MOODE 3.7- TONBRUX BATTERY SUPPLY & CHROMECAST2 AUDIO DONGLE no1 - JBE SERIES 3 SLATEDECK & EMOTIVA XPS-1 PHONO - DENON DV2900 - TWIN PRO MONOBLOCK AMPLIFIERS. - XIANG SHENG DAC\PRE\HEADPHONE AMP. -AUDIO TECHNICA ATH-MSR7 & OPPO PM-3 PLANAR HEADPHONES - WIN10 JRIVER22, SPOTIFY PREMIUM- KINPS CABLES, SMSL M6 MINIDAC, CHROMECAST2 AUDIO DONGLE no2 POWERED BY ANKER BATTERY PSU - FULL RANGE TWIN & SINGLE TELEFUNKEN's - Q ACOUSTIC BT3 actives - CANTON SUB - TANDBERG TCD310 CASS - CARTS.. ACD xlm mk1 integra, AT95SA Shibata, SHURE N55 SAS, SHURE M55E original, JVC MD1029. - RCA CABLES BY BRIAN SPKR CABLES BY MOI HAIR BY MARCO FEET BY ELECTRICBEACH - MAINS REGENERATED BY POWERINSPIRED AND FILTERED BY BELKIN PUREAV.

  3. #3
    Join Date: Dec 2015

    Location: Alicante. Spain.

    Posts: 982
    I'm Adrian.

    Default

    Lovely.
    Adey

    In perpetual pursuit.
    Technics SP10 mk2
    Jan Allaerts MC 1 Boron mk1 cart
    Miyajima Shilabe cart
    Hashimoto HM-X SUT
    Siggwan (gimballed not unipivot) Cocobola 12"
    Aurorasound Vida LCR Phonostage
    The Truth linestage
    Dave Slagle Autoformer Volume Controller
    Cary 805c SET amps
    Audio Note ANe-SPX speakers
    Townshend Isolda speaker cables
    Cardas Golden Presence interconnects

  4. #4
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 70,747
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Yeah, cool aren't they? Like you say, Grant, a good price... Just wanted to freshen things up a bit on the valve front, and spied these, which tick all the boxes!

    Marco.
    "A man is a success if he gets up in the morning and gets to bed at night, and in between he does what he wants to do". - Milan Kundera.

    "Your validity or worth are not defined or determined by the views of others with their own superimposed agendas". - Pharos (on AoS)

    My system:

    Modified Technics SL-1210MK5G/Mike New high-precision bearing & baseplate/Mike New ETP platter/Bruil record weight/Nagaoka GL602 crystal T/T mat. Paul Hynes SR7EHD PSU (plus regulator modules)/DCSXL pure-silver DC lead. Ortofon RS-212D tonearm/'Speedy Steve' custom-made Ebony armboard. Yannis Tome 423.5 Phono Silver-Litz tonearm cable, with Furutech CF-DIN(R) and Eichmann silver Bullet Plugs. Cartridges: Denon DL-S1 in AT MG-10 headshell with AT-6106 Quattro Hybrid lead-wire. Denon DL-103C1 in '103U' headshell with AT-609 silver lead-wire. Vintage Denon DL-103AU in AT-Ti15ANV Titanium Headshell. Shure M55E in Denon PCL-300 headshell with 6N silver lead-wire. Shure original USA SC35C. Audiocom-modified Sony X-777ES/DAS-R1 transport/DAC. Raspberry Pi-3 Model B and IQaudio Pi-DAC+/Paul Hynes SR3DR-05 linear PSU/Williams Audio NAS linear PSU. Heavily-modified Croft Charisma-X preamp. Stereo Coffee LDR. Head-amp: Paul Hynes design/SR5 PSU. Also modified Lentek. Tube Distinctions 50W Class A P/P Copper amp with cryo-treated Tung Sol KT150s. Speakers: 'Lockwood Majors', using 15" Tannoy Monitor Golds, modified with bespoke crossovers. Also Celestion Ditton 15XRs. Stands: Mana Acoustics (non-magnetic stainless steel 'clones’). Hi-Fi Racks Podium T/T wall shelf. Sony ST-5055L tuner. Cables: Furukawa EE/F-S 2mm & 2.6mm solid-core mains leads, fitted with Furutech FI-50 IECs and FI-1363Rs. Stereo interconnects: Sommer Carbokab 225 (with silver-plated MS Audio non-metallic POM RCAs). Speaker cable: VDH 'The Wind' Hybrid II. Digital coaxial cable: 1m Trompeter Electronics Triax TRC-75-2, with MS Audio ‘Starline' silver-plated RCAs. Mains block: Mark Grant 6-way, modded with Furutech FP-1363R sockets and Furukawa cable. Tube Distinctions digital noise filter. VPI HW 16.5 record cleaner.

  5. #5
    Join Date: Nov 2010

    Location: Yorkshire

    Posts: 6,624
    I'm AnDreW.

    Default

    I think we use the same output valves on our preamps I think I've got a couple of vintage MUllards plumbed into mine and have some RCA's as well which I haven't tried so this could provide me with a poke to have a try tonight.
    SS CD Teac VRDS25X(Mega Modded) DAC Caiman SEG+Anker PSU DECK 1210 Mat Analouge Studio Crystal Mods MN Base/Bearing/Platter+Ebony arm Board Feet Isonoe PSU Paul Hynes SR7EHD-27XL/DCSXL Ag DC lead/Jaeger(low-impedance) connector/3 StageRegs/Recapped PCB+No Pitch/Strobe/Light ARM SME V(Kondo Ag Rewire&Tags) MCOrtofon Cadenza Black CABLES Arm Yannis SPD-4 IC Yannis 222 Litz+Ag bullets Power WAR PRE ATC SCA2 SPEAKERS ATC 50ASL STANDS Atacama PHONO Sugden Masterclass PA4 SUT Ortofon ST80SE POWER PSAudio P10

    Valve PRECroft Epoch(Mega Modded) AMP Sondex S100 SPEAKERS Tannoy 15"MG+RFC Warwick cabs+ Reference XO DECK Garrard301 MatTeunto GunMetal Bearing401 PlinthMoldovan Arm SME 3012(Ikeda Ag wired) PSUPheonix PSU+Tachomter MCAg Meister SPU/DECCA Maroon CABLESArm Yannis 420.5 Litz+ Speaker3mm2Ag IC Oyaide FTVS-510 AgWBT 0110Ag Phonostage4Box Paradise


  6. #6
    Join Date: Jan 2013

    Location: Birmingham

    Posts: 2,999
    I'm James.

    Default

    Nice one Marco, they should give the Croft a new lease of life.
    VPI Scout 1.1 / JMW 9T Tonearm / 2M Black /Croft 25R+ / Croft 7 / Spendor SP2

  7. #7
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 70,747
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Quote Originally Posted by REXTON View Post
    I think we use the same output valves on our preamps I think I've got a couple of vintage MUllards plumbed into mine and have some RCA's as well which I haven't tried so this could provide me with a poke to have a try tonight.
    Yeah, I think you ended up with some Mullard ECC35s, Andy, did you not? They should be top notch! I just grudge spending the sort of money on them that's needed, and prefer to try more 'left-field' options, where SPPV is usually a little higher

    The RCAs should also be nice. Defo give them a go!

    Marco.
    "A man is a success if he gets up in the morning and gets to bed at night, and in between he does what he wants to do". - Milan Kundera.

    "Your validity or worth are not defined or determined by the views of others with their own superimposed agendas". - Pharos (on AoS)

    My system:

    Modified Technics SL-1210MK5G/Mike New high-precision bearing & baseplate/Mike New ETP platter/Bruil record weight/Nagaoka GL602 crystal T/T mat. Paul Hynes SR7EHD PSU (plus regulator modules)/DCSXL pure-silver DC lead. Ortofon RS-212D tonearm/'Speedy Steve' custom-made Ebony armboard. Yannis Tome 423.5 Phono Silver-Litz tonearm cable, with Furutech CF-DIN(R) and Eichmann silver Bullet Plugs. Cartridges: Denon DL-S1 in AT MG-10 headshell with AT-6106 Quattro Hybrid lead-wire. Denon DL-103C1 in '103U' headshell with AT-609 silver lead-wire. Vintage Denon DL-103AU in AT-Ti15ANV Titanium Headshell. Shure M55E in Denon PCL-300 headshell with 6N silver lead-wire. Shure original USA SC35C. Audiocom-modified Sony X-777ES/DAS-R1 transport/DAC. Raspberry Pi-3 Model B and IQaudio Pi-DAC+/Paul Hynes SR3DR-05 linear PSU/Williams Audio NAS linear PSU. Heavily-modified Croft Charisma-X preamp. Stereo Coffee LDR. Head-amp: Paul Hynes design/SR5 PSU. Also modified Lentek. Tube Distinctions 50W Class A P/P Copper amp with cryo-treated Tung Sol KT150s. Speakers: 'Lockwood Majors', using 15" Tannoy Monitor Golds, modified with bespoke crossovers. Also Celestion Ditton 15XRs. Stands: Mana Acoustics (non-magnetic stainless steel 'clones’). Hi-Fi Racks Podium T/T wall shelf. Sony ST-5055L tuner. Cables: Furukawa EE/F-S 2mm & 2.6mm solid-core mains leads, fitted with Furutech FI-50 IECs and FI-1363Rs. Stereo interconnects: Sommer Carbokab 225 (with silver-plated MS Audio non-metallic POM RCAs). Speaker cable: VDH 'The Wind' Hybrid II. Digital coaxial cable: 1m Trompeter Electronics Triax TRC-75-2, with MS Audio ‘Starline' silver-plated RCAs. Mains block: Mark Grant 6-way, modded with Furutech FP-1363R sockets and Furukawa cable. Tube Distinctions digital noise filter. VPI HW 16.5 record cleaner.

  8. #8
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 70,747
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Quote Originally Posted by Jimbo View Post
    Nice one Marco, they should give the Croft a new lease of life.
    Cheers, mate. It's sounding great now, but every few years I like to freshen things up a bit and take a punt on some different NOS varieties

    Marco.
    "A man is a success if he gets up in the morning and gets to bed at night, and in between he does what he wants to do". - Milan Kundera.

    "Your validity or worth are not defined or determined by the views of others with their own superimposed agendas". - Pharos (on AoS)

    My system:

    Modified Technics SL-1210MK5G/Mike New high-precision bearing & baseplate/Mike New ETP platter/Bruil record weight/Nagaoka GL602 crystal T/T mat. Paul Hynes SR7EHD PSU (plus regulator modules)/DCSXL pure-silver DC lead. Ortofon RS-212D tonearm/'Speedy Steve' custom-made Ebony armboard. Yannis Tome 423.5 Phono Silver-Litz tonearm cable, with Furutech CF-DIN(R) and Eichmann silver Bullet Plugs. Cartridges: Denon DL-S1 in AT MG-10 headshell with AT-6106 Quattro Hybrid lead-wire. Denon DL-103C1 in '103U' headshell with AT-609 silver lead-wire. Vintage Denon DL-103AU in AT-Ti15ANV Titanium Headshell. Shure M55E in Denon PCL-300 headshell with 6N silver lead-wire. Shure original USA SC35C. Audiocom-modified Sony X-777ES/DAS-R1 transport/DAC. Raspberry Pi-3 Model B and IQaudio Pi-DAC+/Paul Hynes SR3DR-05 linear PSU/Williams Audio NAS linear PSU. Heavily-modified Croft Charisma-X preamp. Stereo Coffee LDR. Head-amp: Paul Hynes design/SR5 PSU. Also modified Lentek. Tube Distinctions 50W Class A P/P Copper amp with cryo-treated Tung Sol KT150s. Speakers: 'Lockwood Majors', using 15" Tannoy Monitor Golds, modified with bespoke crossovers. Also Celestion Ditton 15XRs. Stands: Mana Acoustics (non-magnetic stainless steel 'clones’). Hi-Fi Racks Podium T/T wall shelf. Sony ST-5055L tuner. Cables: Furukawa EE/F-S 2mm & 2.6mm solid-core mains leads, fitted with Furutech FI-50 IECs and FI-1363Rs. Stereo interconnects: Sommer Carbokab 225 (with silver-plated MS Audio non-metallic POM RCAs). Speaker cable: VDH 'The Wind' Hybrid II. Digital coaxial cable: 1m Trompeter Electronics Triax TRC-75-2, with MS Audio ‘Starline' silver-plated RCAs. Mains block: Mark Grant 6-way, modded with Furutech FP-1363R sockets and Furukawa cable. Tube Distinctions digital noise filter. VPI HW 16.5 record cleaner.

  9. #9
    Join Date: Jan 2013

    Location: Birmingham

    Posts: 2,999
    I'm James.

    Default

    Quote Originally Posted by Marco View Post
    Cheers, mate. It's sounding great now, but every few years I like to freshen things up a bit and take a punt on some different NOS varieties

    Marco.
    I will be doing something with Croft stuff myself very soon - keep an eye out for a post coming up.
    VPI Scout 1.1 / JMW 9T Tonearm / 2M Black /Croft 25R+ / Croft 7 / Spendor SP2

  10. #10
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 70,747
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Cool. I look forward to it, mate

    Marco.
    "A man is a success if he gets up in the morning and gets to bed at night, and in between he does what he wants to do". - Milan Kundera.

    "Your validity or worth are not defined or determined by the views of others with their own superimposed agendas". - Pharos (on AoS)

    My system:

    Modified Technics SL-1210MK5G/Mike New high-precision bearing & baseplate/Mike New ETP platter/Bruil record weight/Nagaoka GL602 crystal T/T mat. Paul Hynes SR7EHD PSU (plus regulator modules)/DCSXL pure-silver DC lead. Ortofon RS-212D tonearm/'Speedy Steve' custom-made Ebony armboard. Yannis Tome 423.5 Phono Silver-Litz tonearm cable, with Furutech CF-DIN(R) and Eichmann silver Bullet Plugs. Cartridges: Denon DL-S1 in AT MG-10 headshell with AT-6106 Quattro Hybrid lead-wire. Denon DL-103C1 in '103U' headshell with AT-609 silver lead-wire. Vintage Denon DL-103AU in AT-Ti15ANV Titanium Headshell. Shure M55E in Denon PCL-300 headshell with 6N silver lead-wire. Shure original USA SC35C. Audiocom-modified Sony X-777ES/DAS-R1 transport/DAC. Raspberry Pi-3 Model B and IQaudio Pi-DAC+/Paul Hynes SR3DR-05 linear PSU/Williams Audio NAS linear PSU. Heavily-modified Croft Charisma-X preamp. Stereo Coffee LDR. Head-amp: Paul Hynes design/SR5 PSU. Also modified Lentek. Tube Distinctions 50W Class A P/P Copper amp with cryo-treated Tung Sol KT150s. Speakers: 'Lockwood Majors', using 15" Tannoy Monitor Golds, modified with bespoke crossovers. Also Celestion Ditton 15XRs. Stands: Mana Acoustics (non-magnetic stainless steel 'clones’). Hi-Fi Racks Podium T/T wall shelf. Sony ST-5055L tuner. Cables: Furukawa EE/F-S 2mm & 2.6mm solid-core mains leads, fitted with Furutech FI-50 IECs and FI-1363Rs. Stereo interconnects: Sommer Carbokab 225 (with silver-plated MS Audio non-metallic POM RCAs). Speaker cable: VDH 'The Wind' Hybrid II. Digital coaxial cable: 1m Trompeter Electronics Triax TRC-75-2, with MS Audio ‘Starline' silver-plated RCAs. Mains block: Mark Grant 6-way, modded with Furutech FP-1363R sockets and Furukawa cable. Tube Distinctions digital noise filter. VPI HW 16.5 record cleaner.

+ Reply to Thread
Page 1 of 6 123 ... LastLast



 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •