+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Power lead

  1. #1
    Join Date: Jan 2013

    Location: Birmingham

    Posts: 6,811
    I'm James.

    Default Power lead

    Anyone selling a Power Lead with IEC connector. Something better than a kettle lead!
    Main system : VPI Scout 1.1 / JMW 9T / 2M Black / Croft 25R+ / Croft 7 / Heco Celan GT 702

    Second System : Goldring Lenco GL75 / AT95EX / Pioneer SX590 / Spendor SP2

  2. #2
    Join Date: Apr 2008

    Location: Warrington

    Posts: 3,451
    I'm Neil.

    Default

    How long?

    Sent from my SM-G920F using Tapatalk
    Mana Acoustics Racks / Bright Star IsoNodes Decoupling >> Allo DigiOne Player >> Pedja Rogic's Audial Model S DAC + Pioneer PL-71 turntable / Vista Audio phono-1 mk II / Denon PCL-5 headshell / Reson Reca >> LFD DLS >> LFD PA2M (SE) >> Royd RR3s.

  3. #3
    Join Date: Jan 2013

    Location: Birmingham

    Posts: 6,811
    I'm James.

    Default

    Ok folks Power Lead now sorted as an AOS member has kindly offered to make me one.
    Main system : VPI Scout 1.1 / JMW 9T / 2M Black / Croft 25R+ / Croft 7 / Heco Celan GT 702

    Second System : Goldring Lenco GL75 / AT95EX / Pioneer SX590 / Spendor SP2

  4. #4
    Join Date: Sep 2011

    Location: Kilmarnock, Ayrshire, Scotland

    Posts: 533
    I'm stuart.

    Default

    Think 'Pieoftheday' and 'sumday' should read this http://theartofsound.net/forum/showt...SE-READ-!!-***

  5. #5
    Join Date: Apr 2008

    Location: Warrington

    Posts: 3,451
    I'm Neil.

    Default

    Quote Originally Posted by sumday View Post
    that there juice has travelled a long way from your local substation.
    trust me when I say an extra couple of feet will make no diffence...even if its solid gold, silver, costalotium etc..

    I have standard power leads throughout and recently tried a couple of "you beut" thick leads with gee wiz plugs and snazzy lurid coloured sleeves....one featuring a carbon fibre weeve under its thick clear outer cover.
    both looked proper cool but made NO DIFFERENCE WHATSOEVER. pure snakeoil.


    NIGE.
    OK, I'll bite on the blatant thread crapping.

    The substation isn't part of the loop that a component "sees". It's an absurd argument that electrons travel or "wiggle" through our components, into plug sockets right through to substations.

    Some equipment is transparent enough to make cable changes audible, some equipment is cranky with certain cable characteristics, and some people are silly enough to make blanket assumptions.
    Mana Acoustics Racks / Bright Star IsoNodes Decoupling >> Allo DigiOne Player >> Pedja Rogic's Audial Model S DAC + Pioneer PL-71 turntable / Vista Audio phono-1 mk II / Denon PCL-5 headshell / Reson Reca >> LFD DLS >> LFD PA2M (SE) >> Royd RR3s.

  6. #6
    Join Date: Apr 2013

    Location: Easington Lane

    Posts: 4,638
    I'm Vince.

    Default

    Power leads make as big if not a bigger improvement than interconnects and speaker cable. I've lost count of the number of people who once were of the opinion, 'they make no difference' and now there whole system is using quality power cables. If you are happy with your kettle lead, all well and good, but without trying you should not put down.

  7. #7
    Join Date: Apr 2012

    Location: N E Kent

    Posts: 51,625
    I'm Geoff.

    Default

    Quote Originally Posted by Vince View Post
    Power leads make as big if not a bigger improvement than interconnects and speaker cable.
    Why?
    It is impossible for anything digital to sound analogue, because it isn't analogue!

  8. #8
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,012
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Quote Originally Posted by killie99 View Post
    Think 'Pieoftheday' and 'sumday' should read this http://theartofsound.net/forum/showt...SE-READ-!!-***
    Indeed... If either of them do it again, they'll be getting a week's holiday (as per the rules stated), which being established members, they should've read and digested.

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.


    Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!

    Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!


  9. #9
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,012
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Quote Originally Posted by walpurgis View Post
    Why?
    Not the place to discuss this, mate. Sales/wants threads aren't for these types of discussions. If anyone want to discuss the merits or otherwise of 'audiophile' power leads, please start a thread about it in Artist's Palette. Ta!

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.


    Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!

    Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!


  10. #10
    Join Date: May 2010

    Location: Worcestershire, UK

    Posts: 1,101
    I'm Rob.

    Default

    Quote Originally Posted by Vince View Post
    Power leads make as big if not a bigger improvement than interconnects and speaker cable.
    I have to agree with that. I think it's the quality of the shielding. Standard mains leads leak a lot of electrical noise. That's why as a network engineer, we'd avoid running network cables in the same conduits as mains cables. I'm sure that one of the main gains from using good quality leads is the avoidance of electrical noise from one cable, affecting the signal passing along another cable.
    Rob.
    Powered by crossed fingers and clenched buttocks

+ Reply to Thread
Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •