+ Reply to Thread
Results 1 to 10 of 10

Thread: Hi from the JustBoom team!

  1. #1
    Join Date: Jan 2017

    Location: Kent, UK

    Posts: 8
    I'm Aaron.

    Default Hi from the JustBoom team!

    Hi there everybody,

    We are JustBoom - which is a product range brought to you by a company called Pi Supply. At the moment we make high quality audio output boards for the Raspberry Pi computers. In the future however we will be adding support for other single board computers including Arduinos, BeagleBones and more. We will also be releasing some more mainstream products such as standalone DACs and audio players, a high end audio tablet, and many more products in the pipeline.

    We like to be actively involved in the community and so we tend to register on, and regularly monitor forums where people are interested in JustBoom mainly as a way to help our customers :-)

    The main people who would post from this account are Francesco and Aaron (you can see us here - https://www.justboom.co/about-us/)

    Look forward to being a part of the forum!

    Thanks a lot,
    Aaron

  2. #2
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 66,610
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Hi Aaron,

    Welcome to AoS - glad you got there in the end!

    As you're in the trade, you'll need to open a trade account, in order to be able to discuss/promote your products here, so please send me a PM and I'll tell you what's involved to get you set up and ready to go

    Marco.
    "You have your way. I have my way. As for the right way, the correct way and the only way, it does not exist" - Friedrich Wilhelm Nietzsche.


    My system:

    Modified Technics SL-1210MK5G/Mike New high-precision bearing & baseplate/Mike New ETP platter/Bruil record weight/Nagaoka GL602 crystal T/T mat. Paul Hynes SR7EHD PSU (plus regulator modules)/DCSXL pure-silver DC lead. Ortofon RS-212D tonearm/'Speedy Steve' custom-made Ebony armboard. Yannis Tome 423.5 Phono Silver-Litz tonearm cable, with Furutech CF-DIN(R) and Eichmann silver Bullet Plugs. Cartridges: Denon DL-S1 in AT MG-10 headshell with AT-6106 Quattro Hybrid lead-wire. Denon DL-103C1 in '103U' headshell with AT-609 silver lead-wire. Vintage Denon DL-103AU in AT-Ti15ANV Titanium Headshell. Shure M55E in Denon PCL-300 headshell with 6N silver lead-wire. Shure original USA SC35C. Audiocom-modified Sony X-777ES/DAS-R1 transport/DAC. Raspberry Pi-3 Model B and IQaudio Pi-DAC+/Paul Hynes SR3DR-05 linear PSU. Heavily-modified Croft Charisma-X preamp. Modified Goldpoint SA4M-47 passive preamp. Stereo Coffee LDR. Head-amp: Paul Hynes design/SR5 PSU. Also modified Lentek. Tube Distinctions 50W Class A P/P Copper amp with cryo-treated Tung Sol KT150s. Speakers: 'Lockwood Majors', using 15" Tannoy Monitor Golds, modified with bespoke crossovers. Also Celestion Ditton 15XRs. Stands: Mana Acoustics (non-magnetic stainless steel 'clones’). Hi-Fi Racks Podium T/T wall shelf. Sony ST-5055L tuner. Cables: Furukawa EE/F-S 2mm & 2.6mm solid-core mains leads, fitted with Furutech FI-50 IECs and FI-1363Rs. Stereo interconnects: Sommer Carbokab 225 (with silver-plated MS Audio non-metallic POM RCAs). Speaker cable: VDH 'The Wind' Hybrid II. Digital coaxial cable: 1m Trompeter Electronics Triax TRC-75-2, with MS Audio ‘Starline' silver-plated RCAs. Mains block: Mark Grant 6-way, modded with Furutech FP-1363R sockets and Furukawa cable. Tube Distinctions digital noise filter. VPI HW 16.5 record cleaner.

  3. #3
    Join Date: Jan 2017

    Location: Kent, UK

    Posts: 8
    I'm Aaron.

    Default

    Yep - sorry I was being a muppet and did not see the very obvious message telling me to post here first! Sending a PM now...
    JustBoom - Affordable High Quality Audio for Everyone!

  4. #4
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 66,610
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    No worries, Aaron. All sorted now

    Marco.
    "You have your way. I have my way. As for the right way, the correct way and the only way, it does not exist" - Friedrich Wilhelm Nietzsche.


    My system:

    Modified Technics SL-1210MK5G/Mike New high-precision bearing & baseplate/Mike New ETP platter/Bruil record weight/Nagaoka GL602 crystal T/T mat. Paul Hynes SR7EHD PSU (plus regulator modules)/DCSXL pure-silver DC lead. Ortofon RS-212D tonearm/'Speedy Steve' custom-made Ebony armboard. Yannis Tome 423.5 Phono Silver-Litz tonearm cable, with Furutech CF-DIN(R) and Eichmann silver Bullet Plugs. Cartridges: Denon DL-S1 in AT MG-10 headshell with AT-6106 Quattro Hybrid lead-wire. Denon DL-103C1 in '103U' headshell with AT-609 silver lead-wire. Vintage Denon DL-103AU in AT-Ti15ANV Titanium Headshell. Shure M55E in Denon PCL-300 headshell with 6N silver lead-wire. Shure original USA SC35C. Audiocom-modified Sony X-777ES/DAS-R1 transport/DAC. Raspberry Pi-3 Model B and IQaudio Pi-DAC+/Paul Hynes SR3DR-05 linear PSU. Heavily-modified Croft Charisma-X preamp. Modified Goldpoint SA4M-47 passive preamp. Stereo Coffee LDR. Head-amp: Paul Hynes design/SR5 PSU. Also modified Lentek. Tube Distinctions 50W Class A P/P Copper amp with cryo-treated Tung Sol KT150s. Speakers: 'Lockwood Majors', using 15" Tannoy Monitor Golds, modified with bespoke crossovers. Also Celestion Ditton 15XRs. Stands: Mana Acoustics (non-magnetic stainless steel 'clones’). Hi-Fi Racks Podium T/T wall shelf. Sony ST-5055L tuner. Cables: Furukawa EE/F-S 2mm & 2.6mm solid-core mains leads, fitted with Furutech FI-50 IECs and FI-1363Rs. Stereo interconnects: Sommer Carbokab 225 (with silver-plated MS Audio non-metallic POM RCAs). Speaker cable: VDH 'The Wind' Hybrid II. Digital coaxial cable: 1m Trompeter Electronics Triax TRC-75-2, with MS Audio ‘Starline' silver-plated RCAs. Mains block: Mark Grant 6-way, modded with Furutech FP-1363R sockets and Furukawa cable. Tube Distinctions digital noise filter. VPI HW 16.5 record cleaner.

  5. #5
    Join Date: Feb 2013

    Location: W Lothian

    Posts: 27,705
    I'm Grant.

    Default

    Welcome to the site Aaron, i hope you and your products do well
    Regards,
    Grant

    IMUTO TAURUS X4 BATTERY SUPPLY. - RPI2 & I.SABRE DAC running MOODE 2.7-CHROMECAST2 AUDIO x2. - JBE SERIES 3 SLATEDECK & EMOTIVA XPS-1. - PIONEER 717 & MODDED MF X10v3. - PROART AMP/BERESFORD TC-7240 SWITCHBOX. - WIN10 JRIVER21, AUDIO TECHNICA ATH-MSR7 HEADPHONES, KINPS CABLES, SMSL M6 MINIDAC & CHROMECAST AUDIO DONGLE, POWERED BY LINEAR AND BATTERY PSU's - FULL RANGE TWIN & SINGLE TELEFUNKEN's - CARTS.. AT95S, SHURE M55E, JVC MD1029. - RCA CABLES BY BRIAN SPKR CABLES BY MOI HAIR BY MARCO FEET BY ELECTRICBEACH - MAINS REGENERATED AND FILTERED.

  6. #6
    Join Date: Jan 2017

    Location: Kent, UK

    Posts: 8
    I'm Aaron.

    Default

    Hi Grant,

    Thanks very much and good to meet you!

    Thanks
    JustBoom - Affordable High Quality Audio for Everyone!

  7. #7
    Join Date: Apr 2012

    Location: Southall, West London

    Posts: 22,003
    I'm Geoff.

    Default

    Hi Aaron. Welcome to AOS from me too.

    Hope we hear more about your products.

    Geoff.
    Mr. Tact!

    Main system: MMs/ADCs/Deccas/Low output MC's/various SUT's/various arms/hefty Japanese DD TT and hefty Japanese BD TT and small British BD TT/Swiss Idler jobs. 4 CD players/2 jitter buster/2 DACs/Valve buffer. TVC, stepped attenuator or valve pre-amp/Class A SS power-amp or Class A EL34 valve monos or big Japanese (part Class A) integrated. Big and smaller dual concentric speakers and full range speakers, amongst others. And too much more to list!

  8. #8
    Join Date: Jan 2017

    Location: Kent, UK

    Posts: 8
    I'm Aaron.

    Default

    We will start posting info on our trade impressions section.

    But if there is anything you want to ask specifically then let me know.

    We have loads of pictures, info and documentation here also - www.justboom.co
    JustBoom - Affordable High Quality Audio for Everyone!

  9. #9
    Join Date: Aug 2010

    Location: East Midlands

    Posts: 121
    I'm Hugh.

    Default

    Oh! This looks interesting. I've got a Pi Zero just waiting to be interfered with.

  10. #10
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 66,610
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Hi Aaron,

    As requested, I'm letting you know that your trade room has now been opened, so please populate it at your earliest convenience, by posting a new thread there, outlining details of your company and it products.

    Cheers, and good luck!

    Regards,
    Marco.
    "You have your way. I have my way. As for the right way, the correct way and the only way, it does not exist" - Friedrich Wilhelm Nietzsche.


    My system:

    Modified Technics SL-1210MK5G/Mike New high-precision bearing & baseplate/Mike New ETP platter/Bruil record weight/Nagaoka GL602 crystal T/T mat. Paul Hynes SR7EHD PSU (plus regulator modules)/DCSXL pure-silver DC lead. Ortofon RS-212D tonearm/'Speedy Steve' custom-made Ebony armboard. Yannis Tome 423.5 Phono Silver-Litz tonearm cable, with Furutech CF-DIN(R) and Eichmann silver Bullet Plugs. Cartridges: Denon DL-S1 in AT MG-10 headshell with AT-6106 Quattro Hybrid lead-wire. Denon DL-103C1 in '103U' headshell with AT-609 silver lead-wire. Vintage Denon DL-103AU in AT-Ti15ANV Titanium Headshell. Shure M55E in Denon PCL-300 headshell with 6N silver lead-wire. Shure original USA SC35C. Audiocom-modified Sony X-777ES/DAS-R1 transport/DAC. Raspberry Pi-3 Model B and IQaudio Pi-DAC+/Paul Hynes SR3DR-05 linear PSU. Heavily-modified Croft Charisma-X preamp. Modified Goldpoint SA4M-47 passive preamp. Stereo Coffee LDR. Head-amp: Paul Hynes design/SR5 PSU. Also modified Lentek. Tube Distinctions 50W Class A P/P Copper amp with cryo-treated Tung Sol KT150s. Speakers: 'Lockwood Majors', using 15" Tannoy Monitor Golds, modified with bespoke crossovers. Also Celestion Ditton 15XRs. Stands: Mana Acoustics (non-magnetic stainless steel 'clones’). Hi-Fi Racks Podium T/T wall shelf. Sony ST-5055L tuner. Cables: Furukawa EE/F-S 2mm & 2.6mm solid-core mains leads, fitted with Furutech FI-50 IECs and FI-1363Rs. Stereo interconnects: Sommer Carbokab 225 (with silver-plated MS Audio non-metallic POM RCAs). Speaker cable: VDH 'The Wind' Hybrid II. Digital coaxial cable: 1m Trompeter Electronics Triax TRC-75-2, with MS Audio ‘Starline' silver-plated RCAs. Mains block: Mark Grant 6-way, modded with Furutech FP-1363R sockets and Furukawa cable. Tube Distinctions digital noise filter. VPI HW 16.5 record cleaner.

+ Reply to Thread



 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •