i would like to change the 2 speed potentiometers on my pioneer turntable,the markings on both pots are as follows, NOBLE KCS -004-0 B500 Ω A=G
anyone know what rating they are please?
Senior Member
Location: brighton uk.
Posts: 4,737
I'm jamie.
what rating is this speed pot?
i would like to change the 2 speed potentiometers on my pioneer turntable,the markings on both pots are as follows, NOBLE KCS -004-0 B500 Ω A=G
anyone know what rating they are please?
My System
John Wood KT88 Amp.
Paradise Phono Stage
Sony TTS-8000 Turntable.
PMAT-1010 MK6 Tonearm.
Ortofon Cadenza Bronze
Sony X555ES Cd Player
Yamaha NS1000m Speakers
Moderator & Terminator!
Location: N E Kent
Posts: 51,625
I'm Geoff.
Do they need changing Jamie?
It is impossible for anything digital to sound analogue, because it isn't analogue!
Senior Member
Location: brighton uk.
Posts: 4,737
I'm jamie.
well they work but i just want to rule them out in diagnosing my slight speed fluctuation
My System
John Wood KT88 Amp.
Paradise Phono Stage
Sony TTS-8000 Turntable.
PMAT-1010 MK6 Tonearm.
Ortofon Cadenza Bronze
Sony X555ES Cd Player
Yamaha NS1000m Speakers
Super Moderator
Location: W Lothian
Posts: 99,005
I'm Grant.
500 ohm presumably.. test it on a meter. Trim pots. You should be able to pick them up easy enough. Unusual for them to be completely goosed. They can end up with wear points, usually just where you want it to be though
Regards,
Grant.... ؠ ......Don't be such a big girl's blouse
I've said it before and I'll say it again: democracy simply-doesn't-work.... ..... ...... ...... ................... ..... ..... ..... ..... .....
FIIO K7 BT, M11 PLUS, BTR7, KA5 - OPPO BDP-103D - PANASONIC UB450 - PANASONIC 4K ULTRA HD TV - PIXEL 6 - AVANTREE LR BLUETOOTH - 2* X600 SOUNDCORE - HEADPHONES INCLUDE, FIIO, NURAPHONES', FOCAL, OPPO, BOSE, CAMBRIDGE, BOWER & WILKINS, DEVIALET, MARSHALL, SONY, MITCHELL & JOHNSTON - 2*ZBOOK'S- MERCURY BD ROM, ROON, QOBUZ, TIDAL, PLEX, CYBERLINK, JRIVER - MULTI HDD'S -
Oh my god! There's nothing wrong with the bidet is there?
“Nothing discloses real character like the use of power. It is easy for the weak to be gentle. Most people can bear adversity. But if you wish to know what a man really is, give him power. This is the supreme test. It is the glory of Lincoln that, having almost absolute power, he never abused it, except on the side of mercy".
“You see these dictators on their pedestals, surrounded by the bayonets of their soldiers and the truncheons of their police ... yet in their hearts there is unspoken fear. They are afraid of words and thoughts: words spoken abroad, thoughts stirring at home -- all the more powerful because forbidden -- terrify them. A little mouse of thought appears in the room, and even the mightiest potentates are thrown into panic.”
"You don't have free will. You have the appearance of free will.”
“There's a war out there, old friend. A world war. And it's not about who's got the most bullets. It's about who controls the information. What we see and hear, how we work, what we think... it's all about the information!”
***SMILE, BE HAPPY***
Senior Member
Location: brighton uk.
Posts: 4,737
I'm jamie.
yes grant that's exactly the trouble,you get them set right then the strobe starts creeping to the left,adjust them and it creeps to the right,if you get it right it seems to just wobble,which is why i want to replace them to rule them out.
i think the problem i have is finding the right shaft length.
My System
John Wood KT88 Amp.
Paradise Phono Stage
Sony TTS-8000 Turntable.
PMAT-1010 MK6 Tonearm.
Ortofon Cadenza Bronze
Sony X555ES Cd Player
Yamaha NS1000m Speakers
Super Moderator
Location: W Lothian
Posts: 99,005
I'm Grant.
The pots on my slatedeck (uses an old techy dd motor)were same. I cleaned them and worked them for an age ..made sure tge wipes were tight and got them set pretty good within a 2 turn a minute which is close enough. I used a fancy speed testing unit. Fires a light at the platter. Now set they are stable, so i just dont touch em lol. But need serviced/ replaced really, along with caps etc. But while its working so well i just left it til it plays up..
Maybe look for an old donor deck
Regards,
Grant
I've said it before and I'll say it again: democracy simply-doesn't-work.... ..... ...... ...... ................... ..... ..... ..... ..... .....
FIIO K7 BT, M11 PLUS, BTR7, KA5 - OPPO BDP-103D - PANASONIC UB450 - PANASONIC 4K ULTRA HD TV - PIXEL 6 - AVANTREE LR BLUETOOTH - 2* X600 SOUNDCORE - HEADPHONES INCLUDE, FIIO, NURAPHONES', FOCAL, OPPO, BOSE, CAMBRIDGE, BOWER & WILKINS, DEVIALET, MARSHALL, SONY, MITCHELL & JOHNSTON - 2*ZBOOK'S- MERCURY BD ROM, ROON, QOBUZ, TIDAL, PLEX, CYBERLINK, JRIVER - MULTI HDD'S -
Oh my god! There's nothing wrong with the bidet is there?
“Nothing discloses real character like the use of power. It is easy for the weak to be gentle. Most people can bear adversity. But if you wish to know what a man really is, give him power. This is the supreme test. It is the glory of Lincoln that, having almost absolute power, he never abused it, except on the side of mercy".
“You see these dictators on their pedestals, surrounded by the bayonets of their soldiers and the truncheons of their police ... yet in their hearts there is unspoken fear. They are afraid of words and thoughts: words spoken abroad, thoughts stirring at home -- all the more powerful because forbidden -- terrify them. A little mouse of thought appears in the room, and even the mightiest potentates are thrown into panic.”
"You don't have free will. You have the appearance of free will.”
“There's a war out there, old friend. A world war. And it's not about who's got the most bullets. It's about who controls the information. What we see and hear, how we work, what we think... it's all about the information!”
***SMILE, BE HAPPY***
Senior Member
Location: brighton uk.
Posts: 4,737
I'm jamie.
this one looks like it will do, (I HOPE)
http://www.mouser.co.uk/Search/Produ...B241E425K504A2
My System
John Wood KT88 Amp.
Paradise Phono Stage
Sony TTS-8000 Turntable.
PMAT-1010 MK6 Tonearm.
Ortofon Cadenza Bronze
Sony X555ES Cd Player
Yamaha NS1000m Speakers
Senior Member
Location: Carlisle - UK
Posts: 1,984
I'm Ken.
That's a 500Kohm pot you link to Jamie, I would measure the one you have to make sure its not just 500ohm. Its a speed control not a volume pot in function and there is also the question of linear or logarithmic curve, which may or may not effect the ease of adjustment/speed matching.Originally Posted by jamie123
Senior Member
Location: Kansas City, Missouri
Posts: 590
I'm Nathan.
All of the Pioneer tables I've seen either use 10k or 20k pots. The European models must be different. I've always replaced them with spares from other tables.
I'm not sure if they are linear or logarithmic, and don't know that it would even matter which type you used.
I'd say measure the one you have and get both types. You can always use them for something else later.
Sent from my Z981 using Tapatalk
Senior Member
Location: brighton uk.
Posts: 4,737
I'm jamie.
its a japanese model nathan,the problem has been traced,it appears to be one of the hall motor pick ups wasn't working,i collect the tt next week
My System
John Wood KT88 Amp.
Paradise Phono Stage
Sony TTS-8000 Turntable.
PMAT-1010 MK6 Tonearm.
Ortofon Cadenza Bronze
Sony X555ES Cd Player
Yamaha NS1000m Speakers
Posting Permissions
Reply With Quote