+ Reply to Thread
Page 19 of 19 FirstFirst ... 9171819
Results 181 to 186 of 186

Thread: The TC-7535 Caiman SEG at a glance.

  1. #181
    Join Date: Apr 2009

    Location: Hertford, Hertfordshire, UK

    Posts: 213
    I'm Adam.

    Default

    Quote Originally Posted by Intenso View Post
    Thanks Adam, would you say its worthwhile over stock PS?
    ...difficult to say as I haven't used the stock psu for a good three years or so. I was using an Anker battery but got fed up of the faff involved in keeping it charged (I also had to add a grain of wheat bulb to ensure enough current was demanded to keep the Anker alive).

    ...what I can say is that the Chinese Power supply was certainly as good as the Anker. When I first bought the Anker it was a step up from the standard PSU so ipso facto I think the Chinese Job is a good buy.
    Adam.

  2. #182
    Join Date: May 2017

    Location: Rome- Italy

    Posts: 4
    I'm Giuseppe.

    Default

    hy to all
    i'd like to know if Stan thinking to improve the dsd capability
    because if he'll do
    the seg will be my definitive dac for long long time!

    i hope so....very good music whit this dac!!!

  3. #183
    Join Date: Apr 2017

    Location: Bristol

    Posts: 62
    I'm Tony.

    Default

    My new SEG was delivered today and straight from the off it sounds great.

    Little bit of burn in and this is clearly a winner and I'm a fussy bugger

    Dedicated dual LPS for both the Touch and SEG hopefully arriving in the next couple of weeks so maybe even a little more performance to come

    Tempted to get some headphones now, where does it all end?
    VPI Scout 1.1, Ortofon Quintet Bronze, Trigon Vanguard I, SB Touch, Beresford Caiman SEG, Mundorfed Yaquin MC13S and Totem Arro.

  4. #184
    Join Date: Apr 2017

    Location: Bristol

    Posts: 62
    I'm Tony.

    Default

    Well my dual LPS arrived today 12v instead of 15v and the 5v is reading as 11v.

    Can anyone advise is there a way to adjust the output or is this a return...
    VPI Scout 1.1, Ortofon Quintet Bronze, Trigon Vanguard I, SB Touch, Beresford Caiman SEG, Mundorfed Yaquin MC13S and Totem Arro.

  5. #185
    Join Date: Feb 2008

    Location: http://www.homehifi.co.uk

    Posts: 6,013

    Default

    There are two preset controls inside the PSU that you would need to adjust. Remove the top of the case and take a picture of the inside of the PSU so that one of us here can identify the presets that need adjusting, unless you recognise them before posting the picture here. You can of course also ask the seller for instructions on how to make the adjustment.

  6. #186
    Join Date: Apr 2017

    Location: Bristol

    Posts: 62
    I'm Tony.

    Default

    Hi Stan

    I've had a bit of feedback on the Blank Canvas section of the forum and I've adjusted one side to 14.9v which seems to work well with the SEG.

    The other side wont adjust to anything below 10.7v so no good for the SBT.

    I'm not even sure the transformer in the unit would go below 7.5v.

    Here's a pic.
    Attached Images Attached Images
    VPI Scout 1.1, Ortofon Quintet Bronze, Trigon Vanguard I, SB Touch, Beresford Caiman SEG, Mundorfed Yaquin MC13S and Totem Arro.

+ Reply to Thread
Page 19 of 19 FirstFirst ... 9171819



 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •