+ Reply to Thread
Results 1 to 2 of 2

Thread: Ex demo pair of Jennas on sale

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date: Nov 2015

    Location: Anlaby, Yorkshire, UK

    Posts: 44
    I'm Scott.

    Default Ex demo pair of Jennas on sale

    An ex-demo pair of our Jenna model up for sale. Normal price for the Jenna is £2,000 -as an ex-demo, we're asking £1,300 for this pair.

    More information on the Jenna is available on our website. Briefly, it has been designed to be a medium-sized, high-sensitivity floorstanding monitor majoring on technical accuracy. It uses 4 paper cone midbass drivers with a high drive - mass ratio, and a coated silk dome tweeter with ferrofluid damping. Nominal sensitivity is 90dB 1m/w with a practical in-room response of 42Hz - above 20KHz. The enclosure uses a custom lightly damped alignment with a generous vent area to ensure velocity is minimised. The crossover is a full hard-wired type on physically separate low-pass and high-pass boards. All capacitors are polypropylene type matched to 2% tolerance, with inductors custom wound to our spec. in same tolerance, and resistors also tolerance selected. The crossover is an asymmetric offset 4th order Butterworth for a maximally flat amplitude response. Sound is very clean, with a neutral tonal balance and high dynamic contrast. Imaging is precise, and stable over a wide arc.

    This pair has all ten drivers matched & pre-broken in. The cabinets are in Finnish birch plywood, veneered in bookmatched English oak with a hand-rubbed oil-varnish finish, which was lightly distressed for a slightly 'vintage' look, and then given a beeswax top-coat. Some images are attached.

    Please contact Colin or myself on this thread or via PM for further information.

    Best regards to all (and Happy 2016!)
    Scott & Colin
    Attached Images Attached Images

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •