Moode Player Help

[struth]

must remember not to update in moode then

[Aligauld]

Hi There,

Played about yesterday evening and compiled Moode 4.0 Beta 8 through my windows box.
I haven't messed about compiling code since Gentoo Linux and that was a few years ago but it was fairly simple using the build instructions and cut and paste.
Not as impossible as i thought it might be.

Cheers,
Alistair

[Primalsea]

Hi There,

Played about yesterday evening and compiled Moode 4.0 Beta 8 through my windows box.
I haven't messed about compiling code since Gentoo Linux and that was a few years ago but it was fairly simple using the build instructions and cut and paste.
Not as impossible as i thought it might be.

Cheers,
Alistair

If there is any step by step instructions on how to compile Moode, or if you dont mind sticking the image file on something like Dropbox, this would be really helpful. I wanted to use Moode as it has a parametric equaliser and I would like to tune out the main fundamental resonance in my room which is around 100hz. I tried to work out how to compile the software but not being a programmer I just couldn’t work it out.

[Aligauld]

If there is any step by step instructions on how to compile Moode, or if you dont mind sticking the image file on something like Dropbox, this would be really helpful. I wanted to use Moode as it has a parametric equaliser and I would like to tune out the main fundamental resonance in my room which is around 100hz. I tried to work out how to compile the software but not being a programmer I just couldn’t work it out.

These are the Instructions for a build using a Windows or Mac Box.
You will need Etcher and Putty to write the image to an SD card and ssh into the pi from Windows.

Any line with sudo should be pasted seperately
Using Windows or Mac computer
////////////////////////////////////////////////////////

1. Download Raspbian Stretch Lite 2017-09-07
http://downloads.raspberrypi.org/ras...retch-lite.zip

2. Unzip and install the .img file to an SD Card
https://www.raspberrypi.org/document...alling-images/

3. Eject the SD Card and then re-insert it
4. Open File Manager (Windows) or Finder (Mac)
5. Click the device named "boot" to show its contents
6. Create an empty file named "ssh" in the boot directory
7. Optionally enable WiFi connection
a. Create a file named wpa_supplicant.conf in the boot directory
b. Paste the lines below into the file making approproate substitutions for SSID and PASSWORD
c. Save the file

country=GB
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1

network={
ssid="YourSSID"
scan_ssid=1
psk="YourPASSWORD"
}

8. Edit the file named cmdline.txt

# Remove the text below
quiet init=/usr/lib/raspi-config/init_resize.sh

# Add this text to beginning of the line. Ensure there is a space between this text and the remaining text.
net.ifnames=0

9. Eject the SD Card

////////////////////////////////////////////////////////
//
// STEP 3 - Expand the root partition to 3GB
//
////////////////////////////////////////////////////////

1. Insert the SD Card into a Raspberry Pi and POWER UP.

2. Change the current password (raspberry) to moodeaudio and the host name to moode.

ssh pi@raspberrypi (pwd=raspberry)

echo "pi:moodeaudio" | sudo chpasswd
sudo sed -i "s/raspberrypi/moode/" /etc/hostname
sudo sed -i "s/raspberrypi/moode/" /etc/hosts

3. Download moOde application sources and configs.

NOTE: We are downloading the Sources in this particular step in order to obtain the resizefs.sh file.

// moOde 4 Beta 8
cd ~
wget http://moodeaudio.org/downloads/beta...el-stretch.zip
sudo unzip ./rel-stretch.zip

4. Expand the root partition to 3GB.

sudo cp ./rel-stretch/www/command/resizefs.sh ./
sudo chmod 0755 ./resizefs.sh
sudo sed -i "/PART_END=/c\PART_END=+3000M" ./resizefs.sh
sudo ./resizefs.sh start
sudo rm ./resizefs.sh
sudo cp ./rel-stretch/boot/config.txt.default /boot/config.txt

sudo poweroff

////////////////////////////////////////////////////////
//
// STEP 4 - Install core packages
//
////////////////////////////////////////////////////////

1. First lets make some basic optimizations

ssh pi@moode (pwd=moodeaudio)

sudo dphys-swapfile swapoff
sudo update-rc.d dphys-swapfile remove
sudo rm /var/swap
sudo systemctl disable cron.service
sudo systemctl enable rpcbind
sudo apt-get -y purge triggerhappy

2. Install core packages.

# NOTE: run these two commands separately
sudo apt-get update
sudo apt-get -y upgrade

sudo reboot

sudo apt-get -y install rpi-update php-fpm nginx sqlite3 php-sqlite3 memcached php-memcache mpc \
bs2b-ladspa libbs2b0 libasound2-plugin-equal telnet automake sysstat squashfs-tools tcpdump shellinabox \
samba smbclient udisks-glue ntfs-3g exfat-fuse git inotify-tools libav-tools

sudo systemctl disable shellinabox

////////////////////////////////////////////////////////
//
// STEP 5 - Install enhanced networking
//
////////////////////////////////////////////////////////

1. Install Host AP mode

sudo apt-get -y install dnsmasq hostapd

sudo systemctl daemon-reload
sudo systemctl disable hostapd
sudo systemctl disable dnsmasq

2. Install Bluetooth

sudo apt-get -y install bluez bluez-firmware pi-bluetooth \
dh-autoreconf expect libortp-dev libbluetooth-dev libasound2-dev \
libusb-dev libglib2.0-dev libudev-dev libical-dev libreadline-dev libsbc1 libsbc-dev

NOTE: Ignore warnings from autoreconf and configure

cd /tmp
sudo git clone https://github.com/Arkq/bluez-alsa.git
cd bluez-alsa
sudo autoreconf --install
sudo mkdir build
cd build
sudo ../configure --disable-hcitop --with-alsaplugindir=/usr/lib/arm-linux-gnueabihf/alsa-lib
sudo make
sudo make install
cd ~
sudo rm -rf /tmp/bluez-alsa

3. Services are started by moOde Worker so lets disable them here.

sudo systemctl daemon-reload
sudo systemctl disable bluetooth.service
sudo systemctl disable bluealsa.service
sudo systemctl disable hciuart.service

4. Finish up

sudo mkdir -p /var/run/bluealsa
sudo sync
sudo apt-get clean

sudo reboot

////////////////////////////////////////////////////////
//
// STEP 6 - Install Rotary encoder driver
//
////////////////////////////////////////////////////////

1. WiringPi

NOTE: Ignore warnings during build

sudo cp ./rel-stretch/other/wiringpi/wiringPi-2.44-96344ff.tar.gz ./
sudo tar xfz ./wiringPi-2.44-96344ff.tar.gz
cd wiringPi-96344ff
sudo ./build
cd ~/
sudo rm -rf ./wiringPi-96344ff
sudo rm ./wiringPi-2.44-96344ff.tar.gz

2. Rotenc

sudo cp ./rel-stretch/other/rotenc/rotenc.c ./
sudo gcc -std=c99 rotenc.c -orotenc -lwiringPi
sudo cp ./rotenc /usr/local/bin
sudo rm ./rotenc*

////////////////////////////////////////////////////////
//
// STEP 7 - Compile and install MPD
//
////////////////////////////////////////////////////////

1. Create MPD runtime environment.

sudo useradd mpd
sudo mkdir /var/lib/mpd
sudo mkdir /var/lib/mpd/music
sudo mkdir /var/lib/mpd/playlists
sudo touch /var/lib/mpd/state
sudo chown -R mpd:audio /var/lib/mpd
sudo mkdir /var/log/mpd
sudo touch /var/log/mpd/mpd.log
sudo chmod 644 /var/log/mpd/mpd.log
sudo chown -R mpd:audio /var/log/mpd
sudo cp ./rel-stretch/mpd/mpd.conf.default /etc/mpd.conf
sudo chown mpd:audio /etc/mpd.conf
sudo chmod 0666 /etc/mpd.conf

2. Install MPD dev libs.

sudo apt-get -y install libmad0-dev libmpg123-dev libid3tag0-dev \
libflac-dev libvorbis-dev libfaad-dev \
libwavpack-dev \
libavcodec-dev libavformat-dev \
libmp3lame-dev \
libsoxr-dev \
libcdio-paranoia-dev libiso9660-dev \
libcurl4-gnutls-dev \
libasound2-dev \
libshout3-dev libyajl-dev \
libmpdclient-dev \
libavahi-client-dev \
libsystemd-dev \
libwrap0-dev \
libboost-dev \
libicu-dev \
libglib2.0-dev

3. Download MPD 0.20.11 sources and prep for compile.

sudo wget http://www.musicpd.org/download/mpd/...0.20.11.tar.xz
sudo tar xf mpd-0.20.11.tar.xz
cd mpd-0.20.11
sudo sh autogen.sh

4. Configure compile options.

sudo ./configure --enable-database --enable-libmpdclient --enable-alsa \
--enable-curl --enable-dsd --enable-ffmpeg --enable-flac \
--enable-id3 --enable-soundcloud --enable-lame-encoder --enable-mad \
--enable-mpg123 --enable-pipe-output --enable-recorder-output --enable-shout \
--enable-vorbis --enable-wave-encoder --enable-wavpack --enable-httpd-output \
--enable-soxr --with-zeroconf=avahi \
--disable-bzip2 --disable-zzip --disable-fluidsynth --disable-gme \
--disable-wildmidi --disable-sqlite --disable-jack --disable-ao --disable-oss \
--disable-ipv6 --disable-pulse --disable-nfs --disable-smbclient \
--disable-upnp --disable-expat --disable-lsr \
--disable-sndfile --disable-audiofile --disable-sidplay

5. Compile and install.

// Enjoy a Coffee and listen to some Tunes while the compile runs :-)

sudo make
sudo make install
sudo strip --strip-unneeded /usr/local/bin/mpd
cd ~
sudo rm -rf ./mpd-0.20.11*

sudo apt-get clean
sudo apt-get autoremove

sudo reboot

////////////////////////////////////////////////////////
//
// STEP 8 - Create moOde runtime environment
//
////////////////////////////////////////////////////////

1. Privilages

sudo -i
echo -e 'pi\tALL=(ALL) NOPASSWD: ALL' >> /etc/sudoers
echo -e 'www-data\tALL=(ALL) NOPASSWD: ALL' >> /etc/sudoers
logout

2. Directories and files

# Dirs
sudo mkdir /var/local/www
sudo mkdir /var/local/www/commandw
sudo mkdir /var/local/www/cssw
sudo mkdir /var/local/www/jsw
sudo mkdir /var/local/www/imagesw
sudo mkdir /var/local/www/imagesw/toggle
sudo mkdir /var/local/www/db
sudo mkdir /var/local/www/templatesw
sudo chmod -R 0755 /var/local/www

sudo mkdir /var/lib/mpd/music/RADIO
sudo mkdir /mnt/NAS
sudo mkdir /mnt/SDCARD
sudo mkdir /mnt/UPNP
# Symlinks
sudo ln -s /mnt/NAS /var/lib/mpd/music/NAS
sudo ln -s /mnt/SDCARD /var/lib/mpd/music/SDCARD
sudo ln -s /media /var/lib/mpd/music/USB
sudo ln -s /var/lib/mpd/music /var/www/mpdmusic
# Logs
sudo touch /var/log/moode.log
sudo chmod 0666 /var/log/moode.log
sudo touch /var/log/php_errors.log
sudo chmod 0666 /var/log/php_errors.log
# Files
sudo cp ./rel-stretch/mpd/sticker.sql /var/lib/mpd
sudo cp -r "./rel-stretch/other/sdcard/Stereo Test/" /var/lib/mpd/music/SDCARD
sudo cp ./rel-stretch/network/interfaces.default /etc/network/interfaces
sudo cp ./rel-stretch/network/wpa_supplicant.conf.default /etc/wpa_supplicant/wpa_supplicant.conf
sudo cp ./rel-stretch/network/dhcpcd.conf.default /etc/dhcpcd.conf
sudo cp ./rel-stretch/network/hostapd.conf.default /etc/hostapd/hostapd.conf
sudo cp ./rel-stretch/var/local/www/db/moode-sqlite3.db.default /var/local/www/db/moode-sqlite3.db
# Permissions
sudo chmod 0777 /var/lib/mpd/music/RADIO
sudo chmod -R 0777 /var/local/www/db
# Deletes
sudo rm -r /var/www/html
sudo rm /etc/update-motd.d/10-uname

////////////////////////////////////////////////////////
//
// STEP 9 - Install moOde sources and configs
//
////////////////////////////////////////////////////////

1. Application sources and configs

sudo rm /var/lib/mpd/music/RADIO/*
sudo rm /var/www/images/radio-logos/*

sudo cp ./rel-stretch/mpd/RADIO/* /var/lib/mpd/music/RADIO
sudo cp ./rel-stretch/mpd/playlists/* /var/lib/mpd/playlists
sudo cp -r ./rel-stretch/etc/* /etc
sudo cp -r ./rel-stretch/home/* /home/pi
sudo cp -r ./rel-stretch/home/.dircolors /home/pi
sudo cp -r ./rel-stretch/lib/* /lib
sudo cp -r ./rel-stretch/usr/* /usr
sudo cp -r ./rel-stretch/var/* /var
sudo cp -r ./rel-stretch/www/* /var/www

sudo chmod 0755 /var/www/command/*
sudo /var/www/command/util.sh "emerald" "2ecc71" "27ae60"
sudo sqlite3 /var/local/www/db/moode-sqlite3.db "update cfg_system set value='Emerald' where param='themecolor'"

3. Permissions for service files

# MPD
sudo chmod 0755 /etc/init.d/mpd
sudo chmod 0644 /lib/systemd/system/mpd.service
sudo chmod 0644 /lib/systemd/system/mpd.socket
# Bluetooth
sudo chmod 0666 /etc/bluealsaaplay.conf
sudo chmod 0644 /etc/systemd/system/bluealsa-aplay@.service
sudo chmod 0644 /etc/systemd/system/bluealsa.service
sudo chmod 0644 /lib/systemd/system/bluetooth.service
sudo chmod 0755 /usr/local/bin/a2dp-autoconnect
# Rotenc
sudo chmod 0644 /lib/systemd/system/rotenc.service
# Udev
sudo chmod 0644 /etc/udev/rules.d/*

4. Services are started by moOde Worker so lets disable them here.

sudo systemctl daemon-reload
sudo systemctl disable mpd.service
sudo systemctl disable mpd.socket
sudo systemctl disable rotenc.service

# The binaries will not have been installed yet, but let's disable the services here
sudo chmod 0644 /lib/systemd/system/squeezelite-armv6l.service
sudo chmod 0644 /lib/systemd/system/squeezelite-armv7l.service
sudo systemctl disable squeezelite-armv6l
sudo systemctl disable squeezelite-armv7l
sudo chmod 0644 /lib/systemd/system/upmpdcli.service
sudo systemctl disable upmpdcli.service

5. Initial permissions for certain files. These also get set during moOde Worker startup.

sudo chmod 0777 /var/local/www/playhistory.log
sudo chmod 0777 /var/local/www/currentsong.txt
sudo touch /var/local/www/libcache.json
sudo chmod 0777 /var/local/www/libcache.json

sudo reboot

////////////////////////////////////////////////////////
//
// STEP 10 - Alsaequal
//
////////////////////////////////////////////////////////

NOTE: The alsamixer command below will generate the alsaequal bin file.

sudo alsamixer -D alsaequal

sudo chmod 0755 /usr/local/bin/alsaequal.bin
sudo chown mpd:audio /usr/local/bin/alsaequal.bin
sudo rm /usr/share/alsa/alsa.conf.d/equal.conf

mpc enable only 1

////////////////////////////////////////////////////////
//
// STEP 11 - Squash /var/www for performance/reliability
//
////////////////////////////////////////////////////////

NOTE: This is optional but highly recommended.

sudo -i
echo "/var/local/moode.sqsh /var/www squashfs ro,defaults 0 0" >>/etc/fstab
logout

cd ~
sudo rm /var/local/moode.sqsh
sudo mksquashfs /var/www /var/local/moode.sqsh

sudo rm -rf /var/www/*
sync

sudo reboot

////////////////////////////////////////////////////////
//
// STEP 12 - Optionally, install latest Linux Kernel
//
////////////////////////////////////////////////////////

sudo PRUNE_MODULES=1 rpi-update

sudo reboot

sudo rm -rf /lib/modules.bak

////////////////////////////////////////////////////////
//
// STEP 13 - http://moode
//
////////////////////////////////////////////////////////

1. Initial configuration

a. http//moode
b. Browse Tab, Default Playlist, Add
c. Menu, Configure, Sources, UPDATE mpd database
d. Menu, Audio, Mpd options, EDIT SETTINGS, APPLY
e. Menu, System, Set timezone
f. Clear system logs, YES
g. Compact sqlite database, YES
h. Keyboard
i. Layout

2. Verification

a) Playback tab
b) Scroll to the last item which should be the Stereo Test track
c) Click to begin play
d) Menu, Audio info
e) Verify Output stream is 16 bit 48 kHz

////////////////////////////////////////////////////////
//
// STEP 14 - Final prep for image
//
////////////////////////////////////////////////////////

2. Check the boot partition.

sudo umount /boot
sudo dosfsck -tawl /dev/mmcblk0p1
sudo dosfsck -r /dev/mmcblk0p1
sudo dosfsck -V /dev/mmcblk0p1
sudo mount /boot

2. Remove DHCP lease files

sudo rm /var/lib/dhcp/*
sudo rm /var/lib/dhcpcd5/*

3. Remove annoying hidden OSX dot files and dirs (Mac only prep)

4. Reset the network config to defaults

*** IMPORTANT! ***

Don't forget to do this!

sudo cp ./rel-stretch/network/interfaces.default /etc/network/interfaces
sudo cp ./rel-stretch/network/wpa_supplicant.conf.default /etc/wpa_supplicant/wpa_supplicant.conf
sudo cp ./rel-stretch/network/dhcpcd.conf.default /etc/dhcpcd.conf
sudo cp ./rel-stretch/network/hostapd.conf.default /etc/hostapd/hostapd.conf

5. Shut down

sudo poweroff

NOTE: Resetting the network config allows the moodecfg.txt automation file to be used to automatically change the
host name and other names at first boot. See the file /var/www/setup.txt for more information on this feature.

################################################## ######
#
#
# Install additional components
#
#
################################################## ######

////////////////////////////////////////////////////////
//
// COMPONENT 1 - MiniDLNA
//
////////////////////////////////////////////////////////

sudo apt-get -y -o Dpkg::Options::="--force-confdef" -o Dpkg::Options::="--force-confold" install minidlna
sudo systemctl disable minidlna
sudo apt-get -y install djmount

////////////////////////////////////////////////////////
//
// COMPONENT 2 - Autoshuffle
//
////////////////////////////////////////////////////////

cd ~
sudo git clone https://github.com/Joshkunz/ashuffle.git
cd ashuffle
sudo make
cd ~
sudo cp ./ashuffle/ashuffle /usr/local/bin
sudo rm -rf ./ashuffle

////////////////////////////////////////////////////////
//
// COMPONENT 3 - MPD Audio Scrobbler
//
////////////////////////////////////////////////////////

cd ~
sudo git clone https://github.com/hrkfdn/mpdas
cd mpdas
sudo make
sudo cp ./mpdas /usr/local/bin
cd ~/
sudo rm -rf ./mpdas
sudo cp ./rel-stretch/usr/local/etc/mpdasrc.default /usr/local/etc/mpdasrc
sudo chmod 0755 /usr/local/etc/mpdasrc

////////////////////////////////////////////////////////
//
// COMPONENT 4 - Shairport-sync
//
////////////////////////////////////////////////////////

sudo apt-get -y install autoconf libtool libdaemon-dev libasound2-dev libpopt-dev libconfig-dev \
avahi-daemon libavahi-client-dev libssl-dev libsoxr-dev

cd ~
sudo git clone https://github.com/mikebrady/shairport-sync.git
cd shairport-sync
sudo autoreconf -i -f
sudo ./configure --with-alsa --with-avahi --with-ssl=openssl --with-soxr --with-metadata --with-stdout --with-systemd
sudo make
sudo make install
sudo systemctl disable shairport-sync
cd ~
sudo rm -rf ./shairport-sync
sudo cp ./rel-stretch/usr/local/etc/shairport-sync.conf /usr/local/etc

////////////////////////////////////////////////////////
//
// COMPONENT 5 - Squeezelite
//
////////////////////////////////////////////////////////

1. Use either the pre-compled binaries or compile directly from Sources

OPTION A: Copy squeezelite pre-compiled binaries for armv6l and armv7l

sudo cp ./rel-stretch/other/squeezelite/squeezelite-1.8.7-999-armv6l /usr/local/bin/squeezelite-armv6l
sudo cp ./rel-stretch/other/squeezelite/squeezelite-1.8.7-999-armv7l /usr/local/bin/squeezelite-armv7l
# Corresponding Sources: ./rel-stretch/other/squeezelite-master.zip

OPTION B: Compile squeezelite from latest Sources

sudo git clone https://github.com/ralph-irving/squeezelite
cd ./squeezelite

On Armv6l

sudo make clean
sudo make OPTS="-s -O3 -march=armv6 -mfloat-abi=hard -mfpu=vfp -DDSD -DRESAMPLE"
sudo cp ./squeezelite /usr/local/bin/squeezelite-armv6l
cd ~
sudo rm -rf ./squeezelite

On Armv7l

sudo make clean
sudo make OPTS="-DDSD -DRESAMPLE"
sudo cp ./squeezelite /usr/local/bin/squeezelite-armv7l
cd ~
sudo rm -rf ./squeezelite

3. See STEP 9 main procedure

#sudo chmod 0644 /lib/systemd/system/squeezelite-armv6l.service
#sudo chmod 0644 /lib/systemd/system/squeezelite-armv7l.service
#sudo systemctl disable squeezelite-armv6l
#sudo systemctl disable squeezelite-armv7l

////////////////////////////////////////////////////////
//
// COMPONENT 6 - Upmpdcli
//
////////////////////////////////////////////////////////

// Enjoy a Coffee and listen to some Tunes while the compiles run :-)

1. Dev libraries

sudo apt-get -y install libmicrohttpd-dev libexpat1-dev \
libxml2-dev libxslt1-dev libjsoncpp-dev python-requests python-pip

sudo pip install gmusicapi

2. Libupnp jfd5

cd ~
sudo cp ./rel-stretch/other/upmpdcli/libupnp-1.6.20.jfd5.tar.gz ./
sudo tar xfz ./libupnp-1.6.20.jfd5.tar.gz
cd libupnp-1.6.20.jfd5
./configure --prefix=/usr --sysconfdir=/etc
make
sudo make install
cd ~
sudo rm -rf ./libupnp-1.6.20.jfd5
sudo rm libupnp-1.6.20.jfd5.tar.gz

3. Libupnpp

sudo cp ./rel-stretch/other/upmpdcli/libupnpp-0.16.0.tar.gz ./
sudo tar xfz ./libupnpp-0.16.0.tar.gz
cd libupnpp-0.16.0
./configure --prefix=/usr --sysconfdir=/etc
make
sudo make install
cd ~
sudo rm -rf ./libupnpp-0.16.0
sudo rm libupnpp-0.16.0.tar.gz

4. Upmpdcli

sudo cp ./rel-stretch/other/upmpdcli/upmpdcli-1.2.15.tar.gz ./
sudo tar xfz ./upmpdcli-1.2.15.tar.gz
cd upmpdcli-1.2.15
./configure --prefix=/usr --sysconfdir=/etcmake
make
sudo make install
cd ~
sudo rm -rf ./upmpdcli-1.2.15
sudo rm upmpdcli-1.2.15.tar.gz

sudo useradd upmpdcli
sudo cp ./rel-stretch/lib/systemd/system/upmpdcli.service /lib/systemd/system
sudo cp ./rel-stretch/etc/upmpdcli.conf /etc
sudo systemctl daemon-reload
sudo systemctl disable upmpdcli

5. upexplorer

NOTE: This also installs a bunch of other utils

sudo git clone https://@opensourceprojects.eu/git/p...ppsamples/code libupnppsamples-code
cd libupnppsamples-code
sudo ./autogen.sh
sudo ./configure
sudo make
sudo make install
cd ~
sudo rm -rf ./libupnppsamples-code

////////////////////////////////////////////////////////
//
// FINAL - Clean up
//
////////////////////////////////////////////////////////

cd ~
sudo apt-get clean
sudo /var/www/command/util.sh clear-syslogs
sudo reboot

################################################## ######
#
#
# Appendix
#
#
################################################## ######

////////////////////////////////////////////////////////
//
// Squashfs procedures
//
////////////////////////////////////////////////////////

1. SQUASH /var/www

sudo -i
echo "/var/local/moode.sqsh /var/www squashfs ro,defaults 0 0" >>/etc/fstab
logout

cd ~
sudo rm /var/local/moode.sqsh
sudo mksquashfs /var/www /var/local/moode.sqsh

sudo rm -rf /var/www/*
sync

sudo reboot

2. UNSQUASH /var/www

sudo killall -s 9 watchdog.sh
sudo systemctl stop nginx
sudo systemctl stop php7.0-fpm
sudo umount /var/www

sudo rmdir /var/www
sudo unsquashfs -d /var/www /var/local/moode.sqsh
sync

sudo sed -i /moode.sqsh/d /etc/fstab
sudo rm /var/local/moode.sqsh

sudo reboot

////////////////////////////////////////////////////////
//
// SD Card procedures (Mac OSX)
//
////////////////////////////////////////////////////////


1. Write SD Card to image file with truncation to the root partition end blk.

NOTE: This assumes the 3GB root expansion in STEP 3.

diskutil list
diskutil unmountDisk /dev/disk3
sudo dd if=/dev/disk3 of=/Users/Lt1user/Documents/moode.img count=6238208 bs=512
diskutil eject /dev/disk3

4. Write image to SD Card.

diskutil list
diskutil unmountDisk /dev/disk3
sudo dd if=/Users/Lt1user/Documents/moode.img of=/dev/rdisk3 bs=1m
diskutil eject /dev/disk3

################################################## ######
#
# END
#
################################################## ######



This worked for me. Hope it helps

Cheers,

Alistair

[Primalsea]

Thanks, I think. It will ceratinly keep me off the streets for a few nights.

[Aligauld]

Thanks, I think. It will ceratinly keep me off the streets for a few nights.

Hi There,

It looks complicated but only took about 4 hours in total.

The majority of that was the four or five instances of compiling the source code.

Have fun

Cheers,

Alistair

[jonners]

From Tim's Build Recipe v1.6: 'Unless otherwise noted or if a command requires user
interaction, groups of commands can be run in batch'.
So no need to run 'sudo' commands separately. Cut and paste each block of code into Terminal.
It looks a lot worse than it is but it needs care and patience.

[LC1979]

I still don't really get why Moode had to go down this route. Surely users will drop off a cliff (maybe even literally after seeing those instructions!). Is it not possible to distribute an image file any more for some reason? Can anyone enlighten me in language I will understand?!

[struth]

yes its an odd decision imo. I wont be going down this route thats for sure. As long as the one ive got works then it will stay as is. if and when it gets corrupted then it is alas goodbye. It is way over my head.

[Aligauld]

I still don't really get why Moode had to go down this route. Surely users will drop off a cliff (maybe even literally after seeing those instructions!). Is it not possible to distribute an image file any more for some reason? Can anyone enlighten me in language I will understand?!

Hi there,

As far as I'm aware it had to do with a GPL licencing issue that was brought to Tim's attention and the work involved in sorting it means that he feels it is too much work to sort it out for all the image types and so he has changed the licence to FOSS (Free Open Source Software) which means we now have to compile our own or wait until it gets picked up by a distro.

Hope that helps,

Alistair