Please count me in your list. Thanks
Location: Birmingham
Posts: 207
I'm Bikram.
Please count me in your list. Thanks
Technics SL1200 mk2 turntable ( Rewired tonearm with cardas 33awg cable) Ortofon 2m blue cartridge. Thorens TD 160 super (Decca london international tonearm and Decca Brown/export cartridge/stylus). Audiolab 8000Q Pre-amplifier with Audiolab 8000P power amplifier. Rega planet 2000 cd player. Pioneer cassette deck CT-S740S. Quad 21L speakers. Moth RCM mk1.
Location: France
Posts: 3
I'm Olivier.
Please count me in your list too. Thanks
Location: Midwest USA
Posts: 25
I'm Vishal.
It's been quite a while since I've read up on this thread. Ian, I'm still as happy as can be with the bearing and the improvements it made! I was just curious to see what you're up to these days? Still working on some tweaks for the turntable or other audio gear? If so, would love to see what you have in the works.
Location: Hampshire
Posts: 306
I'm Mel.
Head over to this link Vishai
https://theartofsound.net/forum/show...-Project/page3
Mel
Location: Midwest USA
Posts: 25
I'm Vishal.
Thanks Mel!
Vishia/Mel
I made my first post on the forum for well over a year yesterday.
I have been out of commission for the best part of 15 months, One member of the forum was aware of my issues but I asked him to keep it to himself.
Diagnosed with Prostate cancer in June 2017, Prostate removed early 2018, peebags tubes etc removed 6 weeks later strict instructions to take it easy and avoid heavy lifting. Severe incontinence which slowly improved over a year, still suffering from stress incontinence so still waiting on the muscle and nerves round my bladder healing -- a slow process.
I have not sat doing nothing but did follow the instruction to avoid heavy lifting so only a little work in my workshop and my steam locos had an easy year.
I have two techies, both with my bearing, power supply mods and sub power modules added. I built carbon fibre arms for both. One has been used frequently and performs very well.
I built a good Phono pre amp using a board from DACT in Denmark ( I dont think one can DIY a good PCB these days with ultra small components and a well tested layout) Its a pro spec. board needing 2 +/-Low noise power supplies and metalwork
I then looked at my streamer,a DIY version of the CAPS series from Computer Audiophile forum. Found a company in Switzerland who manufacture for the pro industry and have available a Board for DIY enthusiasts ( Engineered SA, their NMR network renderer, needs a good power supply and some sub miniature coaxial cable) ended up building 2. I really should write these up and get them onto the forum.
Im currently looking at building a pair of active speakers using Hypex Fusion panel Amps but its very early days. Its a very specialised subject with a steep learning curve. I think aligning the speakers correctly is challenging in a DIY environment.
I have 3 steam locos all needing attention, one of these is a 4 man lift, but they will be running again this summer.
So Ive not quite lost a year!
Ian
Technics 1200 tweaked,Ianmac Bearing,DACT DIY Phono Pre, Belcanto CD-2, Engineered Switzerland DIY Renderer, Benchmark DAC2, Hypex NCore, ATC SCM40
2nd system --Engineered Switzerland DIY streamer, Sony CDP11,Topping D50 DAC, Hypex NCore. Kef 1point2 speakers. Ianmac Filters
Sorry to here what you've been through Ian but really glad you seem to be over the worst.
Prostate cancer is no joke. It's something I'm very mindful of myself as there have been campaigns for awareness. It is a big issue amongst afro caribbean men, where apparently 1in 4 will get it at some point in their lives https://prostatecanceruk.org/get-inv...-and-your-risk
Great that you are now getting stuck into hifi projects again
Do keep us posted with regards to any builds you take on, pics etc always welcome
Last edited by RobbieGong; 08-02-2019 at 18:47.
My System:
Amplification - Sansui AU-alpha 707 DR
Turntable - Technics SP10 MK2-Technics EPA-250 Tonearm-Yannis Tome 423.5Plus tonearm cable-Eichmann KLEI Absolute Harmony plugs.
Ortofon Cadenza Black moving coil cartridge-Fritz Gyger S re-tip. Panzerholz plinth.
CDP - Pioneer PD-91
Speakers - Spendor D7 on Soundcare SuperSpikes
QED Silver Spiral speaker cable-airloc banana plugs
Mains - Ultra Pure silver plated un-switched socket-Missing link EPS 500 silver plated plugs-Hi-Fi Tuning gold plated silver ceramic 13 amp fuses
Location: KY - Scotland
Posts: 5,470
I'm Mike.
Great to see you back posting Ian.
Having been in Ians workshop I can only imagine how hard it's been for him not to work on his locomotives and his Hifi projects.
If I remember right he has two industrial lathes/tools in the workshop that he can do great work with, the large steam loco he mentioned has been built from scratch and it's mightily impressive. The only thing missing from the workshop is a decent heater
He fitted the Paul Hynes regulators to my techie 1210 when I visited him and for that I will always be grateful.
His techie bearing is well worth trying but not sure if he plans doing any more as I knew the techie bearing that it's based on has risen in price quite a bit and this in turn made Ian think it wouldn't sell as well with the finished product being more expensive. He was also designing a tidy looking straight carbon arm for the 1210.
All the best Ian ( yours is possibly the only secret I've ever managed to keep )
Lang May Yer Lum Reek
Location: Midwest USA
Posts: 25
I'm Vishal.
Ian, sorry to hear about the illness you were dealing with. I'm glad you're on the path to recovery! And that you're keeping busy with your various projects. Cheers!