I'm toying with the idea of parting with this. It's a lovely sounding amp that could drive just about any loudspeaker in the known universe, but I miss valves so just checking interest at the moment. I'd be most interested in swapping for a fairly beefy valve amp (50+ watts) rather than selling for cash, but would be open to offers.
Specifications (according to the Manufacturer)
Max Output
(from 20 to 100khz, both channels)
150W (8 Ohm load)
300W (4 Ohm load)
600W (2 Ohm load)
Max Output
(at 1kHz, resistive load)
169 W (8/8 load )
330 W (4 / 4 load )
625 W (2 / 2 load )
Input impedance
Linear 21 k
MM 47 k / 220 pF; MC 100
Preamp. gain
Gain 12 dB
Power stage gain
Stage Gain 33dB
Phono input sensibility
MM 10mVrms - MC 1mVrms
Signal/noise ratio (linear)
>90dB
Signal/noise ratio (‘A’ weighted)
>98dB
Signal/noise ratio phono input (linear)
MM >70dB; MC >60dB
Signal/noise ratio phono input (‘A’ weighted)
MM >80dB; MC >70dB
Total harmonic distortion
<0.01% @ 1 Vrms / 47 k / 1 kHz
Bandwidth (3dB)
1Hz-250kHz
Separation (at 1kHz)
RL >100dB; LR >100dB
Inputs
MM/MC Phono (PH1), Line 2/6 (Line 5 balanced)
Outputs
Tape Out, Pre Out
Tension
115VAC / 230VAC 50/60Hz
(UK only) 240VAC 50/60Hz
Max power use
1500 VA
Size
17.52" (W); 18.7" (D); 7.7" (H)
445 mm (W); 475 mm (D); 195 mm (H)
Weight
52 Kg. / 115 lbs
There's some info here: http://www.tnt-audio.com/ampli/aa_maestro_e.html
And here: http://www.hifiplus.com/t-rev12-1.html
Comes complete with manual, remote (a bit 'hair trigger' on volume), fancy power cable and chuffing great big crate!
Anyone?